Leave a message
|
If you are considering a purchase
Chat with Online Sales for more information before you purchase! |
|
If you already made a purchase
Contact Customer Service for order status and other after-sales issues. Submit a Request |
Get 50 AM points coupon when you sign up for our newsletter
Stabilizing the Z10TIRM is a highly optimized 3-axis camera gimbal with pinpoint-precise motor rotation with a control accuracy of ±0.01° powered by a dedicated processor. Z10TIRM uses a unique mechanically limited design and concealed wires to ensure more stable data transmission and greater durability. Vibration is eliminated using four damping balls and a lightweight damping board, creating seamlessly smooth video. 360°rotation remains possible through gimbal rotation. Stable, smooth footage image can be captured even when flying at high speed flight.
Stabilizing the Z10TIRM is a highly optimized 3-axis camera gimbal with pinpoint-precise motor rotation with a control accuracy of ±0.01° powered by a dedicated processor. 360°rotation remains possible through gimbal rotation. Stable, smooth footage image can be captured even when flying at high speed flight.
Build-in normalization, cross-correlation and tracking algorithm, combining with object missing recapture algorithm, achieve stable track of the target. Support custom characters of user OSD, adaptive gate, cross cursor, trace information display. The tracking speed is up to 32pixel/frame, object size range is from 16*16 pixel to 160*160 pixel, with the minimal signal-to-noise ratio (SNR) 4db, the mean square root values of pulse noise in the object position < 0.5 pixel, which greatly improve the accuracy and tracking effect.
The advanced location calculating algorithm is used to calculate the distance of the object within 1500 meters, accurately analyze the longitude and latitude of the object, and display the on the screen. It has a great auxiliary role in the enforcement of military.
| Hardware Parameter | |
| Working voltage | 14V ~ 16V |
| Input voltage | 3S ~ 4S |
| Dynamic current | 550mA @ 12V |
| Idle current | 450mA @ 12V |
| Power consumption | ≤ 6.6W |
| Working environment temp. | -40°C ~ +60°C |
| Output | HDMI/Network/SDI |
| Local-storage | SD card (Up to 128G, class 10, FAT32 or ex FAT format) |
| Control method | PWM/S.BUS/TTL |
| Gimbal Spec | |
| Pitch/Tilt | ±90° |
| Roll | ±85° |
| Yaw/Pan | ±170° / ±360°*N (IP/SDI/Skyport Output) |
| Vibration angle | Pitch/Roll: ±0.01°, Yaw:±0.01° |
| One-key to center | √ |
| Camera Spec | |
| Imager Sensor | 1/3″ CMOS |
| Picture quality | Full HD 1080 (1920*1080) |
| Effective pixel | 4.08MP |
| Lens optical zoom | 10x, F=3.2~33.6mm |
| Digital zoom | None |
| Min object distance | 10mm(wide end) to 800mm(tele end) |
| Horizontal viewing angle | Wide 62° ~ Tele 6.5° |
| Sync system | Progressive scanning |
| S/N ratio | more than 52dB |
| Min illumination | 0.5lux@F1.8, 50%, 1/30s |
| Illumination range | 100 lx ~100,000 lx |
| Gain | Auto/Manual |
| White balance | ATW1 (Narrow), ATW2 (Wide), single touch, manual (B, R) |
| Shutter speed | 1/1s to 1/10,000s, 22 steps |
| Exposure compensation | -12dB ~ +12dB (13steps in total) |
| Backlight compensation | Yes |
| Aperture control | 16 steps |
| OSD | Yes |
| Fotoformate | JPEG |
| Videoformate | MP4 |
| Camera Object Tracking | |
| Update rate of deviation pixel | 50Hz |
| Output delay of deviation pixel | <10ms |
| Minimum object contrast | 5% |
| SNR | 4 |
| Minimum object size | 16*16 pixel |
| Maximum object size | 160*160 pixel |
| Tracking speed | ±32 pixel/frame |
| Object memory time | 100 frames (4s) |
| The mean square root values of pulse noise in the object position | < 0.5 pixel |
| Thermal imager spec | |
| Lens size | 19mm |
| Horizontal FOV | 32° |
| Vertical FOV | 24° |
| Diagonal FOV | 39.4° |
| Detective Distance (Man: 1.8×0.5m) | 559 meters |
| Recognize Distance (Man: 1.8×0.5m) | 140 meters |
| Verified Distance (Man: 1.8×0.5m) | 70 meters |
| Detective Distance (Car: 4.2×1.8m) | 1714 meters |
| Recognize Distance (Car: 4.2×1.8m) | 428 meters |
| Verified Distance (Car: 4.2×1.8m) | 214 meters |
| Working mode | Uncooled long wave (8μm~14μm) thermal imager |
| Detector pixel | 640*480 |
| Pixel size | 17μm |
| Focusing method | Athermal prime lens |
| Emissivity correction | 0.01~1 |
| NETD | ≤50mK (@25°C) |
| MRTD | ≤650mK (@characteristic frequency) |
| Image enhancement | Auto adjust image brightness and contrast ratio |
| Color palette | Gray Scale, pseudo color, Iron Oxide Red, Rainbow, Color |
| Auto Non-uniform correction | Yes (no shutter) |
| Digital zoom | 1x, 3x |
| Sync correct time | Yes |
| Thermometry type | Not Support |
| Temperature warning | 0°C~100°C |
| Thermal Object Tracking | |
| Update rate of deviation pixel | 25Hz |
| Output delay of deviation pixel | <3ms |
| Minimum object size | 16*16 pixel |
| Maximum object size | 128*128 pixel |
| Tracking speed | ±32 pixel/frame |
| Object memory time | 100 frames (4s) |
| Laser Rangefinder | |
| Range | 5~1500 meters |
| Resolution | 0.5m |
| Working current: | 80mA max |
| Light Beam | 905nm pulse laser |
| Divergent Angle | 3 mrad |
| Laser pulse frequency | 1HZ |
| Power | < 1 mW (safe for eye) |
| Ranging mode | Pulse |
| Location Resolving | Latitude and longitude of target |
| Ranefinder | Target distance measuring |
| Packing Information | |
| N.W. | 612g |
| Product meas. | 110.5*128*155.5mm |
No Photos! Be the first to 
of this product! and get AM points!
No Videos! Be the first to 
of this product! and get AM points!
|
|
||
| If you have already bought this product, please click here to write a review and get 5-30 AM Points.
If you are considering buying this product, please click here to submit your enquiry, or see enquiries from other customers. |
|
|
| For any after sales questions, please Contact Customer Service and get a response within 24 hours. | ||
 |
||
| Average Rating: |  |
0 (see all 0 customer reviews) |
| Any customer writing a review can get AM points, the first five get double AM points (see Austars-Model Points & Rewards | ||
| If you have any questions about this product, delivery, payment options, etc, please feel free to submit your enquiry. We will reply to you within 24 hours. |
|
| For any after sales questions, please Contact Customer Service and get a response within 24 hours | ||
leave a message.
