Leave a message
|
If you are considering a purchase
Chat with Online Sales for more information before you purchase! |
|
If you already made a purchase
Contact Customer Service for order status and other after-sales issues. Submit a Request |
Get 50 AM points coupon when you sign up for our newsletter
Stabilized the Q20KTIR Pro is a highly optimized 3-axis gimbal payload with pinpoint-precise motor rotation with a control accuracy of ±0.01° powered by a dedicated processor. Rather than rely on electrical slip rings - as is common with many gimbals - the Q20KTIR Pro uses a unique mechanically limited design and concealed wires to ensure more stable data transmission and greater durability. Vibration is eliminated using four damping balls and a lightweight damping board, creating seamlessly smooth video. 360°rotation remains possible through gimbal rotation. Stable, smooth footage image can be captured even when flying at high speed flight.
Powered by SONY 1/2.5" "Exmor R" CMOS module, 8.51 mega effective pixel and 4K video quality, combined with 20x advanced optical zoom technology, the observation range is up to 3000 meters, which can meet the application requirements of various domains.
Integrated with high-precision 35mm 1280*1024 HD uncooled long wave (8μm ~14μm ) (pixel pitch is 12μm) thermal image sensor, Q20KTIR Pro can record and transmit thermal image and visible images at the same time in PIP format. The IR can show clear image for target far away, and the digital zoom can support longer range surveillance and inspection.
Optional thermometry version: With temperature measuring sensor, it could accurately attain the temperature of objects and individuals. The thermal sensor allows three points’ temperature ranging between 0?~120? to be measured and displayed on screen. Adjust the different colors applied to the thermal data based on the needs of specific scenarios.
*Temp bar: Indicates gradually variation temperature with corresponding colors.
*Temp measurement: Display average, highest, and lowest temperatures in real time.
*Temp alarm: Don't miss a thing when object temperatures exceed pre-set alert values.
Build-in normalization, cross-correlation and tracking algorithm, combining with object missing recapture algorithm, achieve stable track of the target. Support custom characters of user OSD, adaptive gate, cross cursor, trace information display. The tracking speed is up to 32pixel/frame,object size range is from 16*16 pixel to 160*160 pixel, with the minimal signal-to-noise ratio (SNR) 4dB, the mean square root values of pulse noise in the object position < 0.5 pixel, which greatly improve the accuracy and tracking effect.
Q20KTIR Pro supports both HDMI output and Ethernet/IP output. HDMI and output are 1080p, Ethernet output defualt as 1080p and record is 4K. IP output versions will support 360 degree enless pan.
Defualt PWM and Serial port TTL control, SBUS is optional. IP output version also support TCP control via ethernet cable. With Viewpro software Viewlink you can fulfill IP output, TTL control and TCP control.
Q20KTIR pro is compatible with Viewpro quick release connector Viewport. Viewport is an option known as easy assembly, plug and play.
Mainly supply in law enforcement, fire-fighting, power tower and pipeline inspection, search and rescue etc. A wide range of monitoring and searching is required in an emergency to quickly transfer the situation, improve response efficiency and reduce casualties.
| Q20KTIR Pro | |
| Hardware Parameter | |
| Working voltage | 12V |
| Input voltage | 3S ~ 6S |
| Output voltage | 5V (connect with PWM) |
| Dynamic current | 1250~1900mA @ 12V |
| Idle current | 1250mA @ 12V |
| Working environment temp. | -20°C ~ +60°C |
| Output | micro HDMI(1080P25/30fps)/IP (4K/1080p 25/30fps ) |
| Local-storage | SD card (Up to 128G,class 10, FAT32 or ex FAT format) |
| Photo storage format | JPG (4K:3840*2160) |
| Video storage format | MP4 (1080P/4K 30fps) |
| Control method | PWM / SBUS / TTL / TCP |
| Gimbal Spec | |
| Angle scope of structure design | Pitch/Tilt: -60°-135°, Roll: ±50°, Yaw/Pan: ±300° / ±360°*N (IP output version) |
| Angle scope of software design | Pitch/Tilt: -45°-90°, Yaw/Pan: ±290° / ±360°*N (IP output version) |
| Vibration angle | Pitch/Roll: ±0.02°, Yaw:±0.02° |
| One-key to center | √ |
| EO Camera Spec | |
| Imager Sensor | SONY 1/2.5" "Exmor R" CMOS |
| Total pixel | 8.51MP |
| Optical zoom | 20x, F2.0 to F3.8,f = 4.4 mm (Wide), 88.4 mm (Tele) |
| Digital zoom | 12x (240x with optical zoom) |
| Min. working distance | 80 mm (Wide end), 800 mm (Tele end) |
| Angle of view ( H ) | 70.2°(Wide end) ~ 4.1°(Tele end) |
| Sync system | Internal/External |
| S/N ratio | 50dB |
| Recommended illumination | 100 to 100000 lux |
| Min illumination | 1.6 lux (1/30 sec, 50%, ICR off, High Sensitivity mode Off ) |
| 0.4 lux (1/30 sec, 50%, ICR Off, High Sensitivity mode On) | |
| 0.21 lux (50%, ICR off, Slow Shutter 1/4s, High sensitivity off) | |
| 0.06 lux (50%, ICR off, Slow shutter 1/4s, High sensitivity on) | |
| Back light compensation | On/Off |
| Gain | Auto |
| White balance | Auto/Manual |
| Electronic shutter speed | 1/1 to 1/10000 sec. (22 steps) |
| Noise reduction | On/Off (level 5 to 1/ Off, 6 steps) |
| Defog mode | On/Off (Low, Mid, High) |
| Focus | Auto/Manual/One-time automatic focus |
| Focus speed | 2s |
| Lens initialization | Built-in |
| User presetting bit | 20 sets |
| Image rotation | 180°, Horizontal/Vertical mirror image |
| OSD | Yes |
| IR Thermal Imager Spec | |
| Lens size | 35mm |
| Horizontal FOV | 24.8° |
| Vertical FOV | 19.9° |
| Diagonal FOV | 31.4° |
| Detective Distance (Man: 1.8x0.5m) | 1458 meters |
| Recognize Distance (Man: 1.8x0.5m) | 356 meters |
| Verified Distance (Man: 1.8x0.5m) | 182 meters |
| Detective Distance (Car: 4.2x1.8m) | 4472 meters |
| Recognize Distance (Car: 4.2x1.8m) | 1118 meters |
| Verified Distance (Car: 4.2x1.8m) | 559 meters |
| Working mode | Uncooled long wave (8μm~14μm) thermal imager |
| Detector pixel | 1280*1024 |
| Pixel size | 12μm |
| Focusing method | Athermal prime lens |
| Emissivity correction | 0.01~1 |
| NETD | ≤50mK (@25°C) |
| MRTD | ≤650mK (@characteristic frequency) |
| Image enhancement | Auto adjust image brightness and contrast ratio |
| Color palette | White, iron red, pseudo color |
| Auto Non-uniform correction | Yes (no shutter) |
| Digital zoom | 1x ~ 4x |
| Sync correct time | Yes |
| Thermometry type | Temperature bar (psudo color display) max temp, min temp, FOV center temp (Optional) |
| Temperature warning | 0°C~120°C (For thermometry version only) |
| EO/IR Camera Object Tracking | |
| Update rate of deviation pixel | 50Hz |
| Output delay of deviation pixel | 5ms |
| Minimum object contrast | 5% |
| SNR | 4 |
| Minimum object size | 32*32 pixel |
| Maximum object size | 128*128 pixel |
| Tracking speed | 48 pixel/frame |
| Object memory time | 100 frames (4s) |
| The mean square root values of pulse noise in the object position | < 0.5 pixel |
| Packing Information | |
| N.W. | 1692g(Viewport Version) |
| Product meas. | 139*160.2*230.5mm?Standard Version?139*160.2*236.2(Viewport Version) |
| Accessories | 1pc gimbal camera device, screws, copper cylinders, damping balls, damping boards / Hight quality plastic box with foam cushion |
| Package meas. | 350*300*250mm |
No Photos! Be the first to 
of this product! and get AM points!
No Videos! Be the first to 
of this product! and get AM points!
|
|
||
| If you have already bought this product, please click here to write a review and get 5-30 AM Points.
If you are considering buying this product, please click here to submit your enquiry, or see enquiries from other customers. |
|
|
| For any after sales questions, please Contact Customer Service and get a response within 24 hours. | ||
 |
||
| Average Rating: |  |
0 (see all 0 customer reviews) |
| Any customer writing a review can get AM points, the first five get double AM points (see Austars-Model Points & Rewards | ||
| If you have any questions about this product, delivery, payment options, etc, please feel free to submit your enquiry. We will reply to you within 24 hours. |
|
| For any after sales questions, please Contact Customer Service and get a response within 24 hours | ||
leave a message.
