JET RULER 1/7 JAS39
Jetruler team are making scale JAS39, this one to go above and beyond as a beautiful scale model. Sports version JAS39 jet was made to be reliable and tough enough to actually be flown on a regular basis, and not a problem to transport or put together, all in a package that fly’s brilliantly well. Easily hovering with 19kg turbine for sports manuever.
SPECIFICATIONS:
Model: 1/7 jas39
Wingspan:1370 mm
Length:2340 mm
Weight: 11-12kg
BASIC SETUP:
Control throws:
Aileron: 15 degrees up / 15 degrees down – 50% Expo
Rudder: 30 degrees left / 30 degrees right – 35% Expo
Elevator: 20 degrees / 20 degrees – 35% Expo
The CG is 190mm from the front leading edge on the root of the wing
Canard position
ARF Pro version includes (For 3D performance, air brake, gear door cover scale not included),
3.5L fuel tank,UAT, fuel tank exhaust port, servo extension leads, hardware, 3D tail Vector nozzle, Electric retracts with controller, Brake controller, pre-installed lights with controller,hardware accessories, extra FREE wing bags, semi scale cockpit/pilot and maintenance stand supplied by teamaustars.
Modellers need to install their servos and power box with batteries for the engine
FEATURES:
Full composite construction, lightweight and strong
INCLUDED HARDWARE:
Complete air frame (including fibreglass control horns)
Carbon fibre wing-tubes
Servo extension leads
Fixed Dual wall thrust pipe (for 100-190N turbines)
Fuel tank (3500ml)
Pre-prepared pushrods with ball links
Pre-glued control horns
REQUIRED HARDWARE:
Turbine: 120-240N
Servos: x7
x2 middle size servo,12-20kg
x5 standard size servo, 30-40kg
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
Product Display
COLOUR SCHEMES AVAILABLE:
Colour scheme A :
Colour scheme B :
Colour scheme C :
Colour scheme D :
