| Hardware Parameter |
| Working voltage |
12V ~ 16V |
| Input voltage |
3S ~ 4S |
| Output voltage |
5V (connect with PWM) |
| Dynamic current |
500mA @ 12V |
| Idle current |
400mA @ 12V |
| Power consumption |
≤ 6W |
| Working environment temp. |
-20? ~ +60? |
| Output |
micro HDMI(HD output 1080P 60fps) / IP / SDI |
| Local-storage |
SD card (Up to 128G, class 10, FAT32 or ex FAT format) |
| Control method |
PWM / TTL / S.BUS |
| Gimbal Spec |
| Pitch/Tilt |
±90° |
| Roll |
±85° |
| Yaw/Pan |
±170° / ±360°*N (IP / SDI output) |
| Vibration angle |
Pitch/Roll: ±0.01°, Yaw?±0.01° |
| One-key to center |
√ |
| Camera spec |
| Imager Sensor |
SONY 1/2.8" "Exmor R" CMOS |
| Picture quality |
Full HD 1080 (1920*1080) |
| Effective pixel |
2.13MP |
| Lens optical zoom |
30x, F=4.3~129mm |
| Digital zoom |
12x (360x with optical zoom) |
| Min object distance |
10mm(wide end) to 1200mm(tele end). Default 300mm |
| Horizontal viewing angle |
1080p mode: 63.7°(wide end) ~ 2.3°(tele end) |
| 720p mode: 63.7°(wide end) ~ 2.3°(tele end) |
| SD: 47.8°(wide end) ~ 1.7°(tele end) |
| Sync system |
Internal |
| S/N ratio |
more than 50dB |
| Min illumination |
Color 0.01lux@F1.6 |
| Exposure control |
Auto, Manual, Priority mode(shutter priority & iris priority), Bright, EV compensation, Slow AE |
| Gain |
Auto/Manual 0dB to 50.0dB(0 to 28 steps + 2 setep/ total 15 steps)
Max.Gain Limit 10.7 dB to 50.0dB (6 to 28 steps + 2 step/ total 12 steps) |
| White balance |
Auto, ATW, Indoor, Outdoor, Outdoor Auto, Sodium Vapor Lamp (Fix/Auto/Outdoor Auto), One-push, Manual |
| Shutter speed |
1/1s to 1/10,000s, 22 steps |
| Backlight compensation |
Yes |
| Aperture control |
16 steps |
| Defog |
Yes |
| OSD |
Yes |
| Fotoformate |
JPEG |
| Videoformate |
MP4 |
| Camera Object Tracking |
| Update rate of deviation pixel |
50Hz |
| Output delay of deviation pixel |
<15ms |
| Minimum object contrast |
5% |
| SNR |
4 |
| Minimum object size |
16*16 pixel |
| Maximum object size |
160*160 pixel |
| Tracking speed |
±32 pixel/frame |
| Object memory time |
100 frames (4s) |
| The mean square root values of pulse noise in the object position |
< 0.5 pixel |
| Thermal Imager Spec |
| Lens size |
25mm |
| Horizontal FOV |
24.6° |
| Vertical FOV |
18.5° |
| Diagonal FOV |
30.4° |
| Detective Distance (Man: 1.8x0.5m) |
735 meters |
| Recognize Distance (Man: 1.8x0.5m) |
184 meters |
| Verified Distance (Man: 1.8x0.5m) |
92 meters |
| Detective Distance (Car: 4.2x1.8m) |
2255 meters |
| Recognize Distance (Car: 4.2x1.8m) |
564 meters |
| Verified Distance (Car: 4.2x1.8m) |
282 meters |
| Working mode |
Uncooled long wave (8μm~14μm) thermal imager |
| Detector pixel |
640*480 |
| Pixel size |
17μm |
| Focusing method |
Athermal prime lens |
| Emissivity correction |
0.01~1 |
| NETD |
≤50mK (@25?) |
| MRTD |
≤650mK (@characteristic frequency) |
| Image enhancement |
Auto adjust image brightness and contrast ratio |
| Color palette |
White, iron red, pseudo color |
| Auto Non-uniform correction |
Yes (no shutter) |
| Digital zoom |
1x ~ 4x (up to 6x) |
| Sync correct time |
Yes |
| Thermometry type |
Temperature bar (psudo color display) max temp, min temp, FOV center temp (Optional) |
| Temperature warning |
0?~100? |
| Thermal Imager Object Tracking |
| Update rate of deviation pixel |
25Hz |
| Output delay of deviation pixel |
<3ms |
| Minimum object size |
16*16 pixel |
| Maximum object size |
128*128 pixel |
| Tracking speed |
±32 pixel/frame |
| Object memory time |
100 frames (4s) |
| Packing Information |
| N.W. |
1230g / 1276g(SDI output) |
| Product meas. |
127.6*164.5*173.5mm |
| Accessories |
1pc gimbal camera device, 16pcs screws, 4pcs copper cylinders, 12pcs damping balls, 4pcs damping boards, 1pc USB to TTL cable / Hight quality plastic box with foam cushion |
