SkyWing 82" Falcon 2.1M Full Composite Sports Jet ARF Plus Version - GST Inc (2 left x in stock orange and red, Green soldout) (AUS Warehouse)

SkyWing 82" Falcon 2.1M  - GST Inc (coming in Feb.2024)

Falcon! It is the first jet model developed by skywing! This model design reference prototype is a Viper jet! Falcon is the first jet model released by skywing. We did a lot of research before the design started! Innovation requires taking risks, and we have always been committed to innovation! We think today's jet models need something a little different to increase interest among enthusiasts! Therefore, we have added many innovative designs that allow enthusiasts to quickly assemble the model and fly it! Among the hardware used in the model, we also designed hardware exclusive to this jet model! Also comes with most of the high-quality hardware required to match this model! Greatly reduce the economic costs for enthusiasts! It also makes it easier for enthusiasts to assemble!

 

Hardware included in the product:

1. Protective bag for the complete set of products
2. skywing specially customized high-quality expansion cable
3. skywing patented product orange connection device
3. JP electric retractable landing gear
4. jet pipe
5. Vector (including vector putter)
6. tank(3500ml), smoke box(1000ml), UAT tank(200ml),fuel pipeline,
7. Fuel and ventilation points (2 pieces each)
8. Assembly bracket (for landing gear retraction)
9. Power connector ((3x yellow XT60E, 1x black XT60E)
10. High quality magic ties (2 pieces)
11. Includes all pushrod parts
12. Each brand of engine guide installation marking plate
13. Marking board for measuring each control surface

ONLY THE END PILOT NEEDS THE SERVOS, ENGINE, BATTERY, RECEIVER.
Specifications:

Wingspan:80 in./2032mm
Lenqth:82in./2080mm
Pre-flight weight:23.15lbs/10.5kg?Battery included, no fuel!?

Packaging Size / Weight:
Fuselage=151*36*40cm/10.2kg

Wing=100*37*67cm/10.9kg

Turbine size: (not included)

• 120-140N for normal sport flying
• 160-190N for 3D vector flight 

Servos size: (not included)
*flaps* 2 pcs (standard size high torque 30KG)  arms*2pcs=1.25"-M3
*ailerons* 2 pcs ( size: 35x15x30mm-15kg )  arms*2pcs=1.0"-M3
*elevators* 2 pcs (size: 35x15x30mm-15kg )  arms*2pcs=1.0"-M3
*steering* 2 pcs ( size: 35x15x30mm-15kg )  arms*1pcs=1.0"-M3
*vector rudder* 1 pcs (size: 35x15x30mm-15kg )  arms*1pcs=1.5"-M3
*vector elevators* 1pcs ( size: 35x15x30mm-15kg )  arms*1pcs=1.5"-M3