JET RULER 1/7 JAS39
Jetruler team are making scale JAS39, this one to go above and beyond as a beautiful scale model. Scale JAS39 jet was made to be reliable and tough enough to actually be flown on a regular basis, and not a problem to transport or put together, all in a package that fly’s brilliantly well.
SPECIFICATIONS :
Model: 1/7 jas39
Wingspan:1370 mm
Length:2340 mm
Weight: 11-12kg
BASIC SETUP:
Control throws:
Aileron: 15 degrees up / 15 degrees down – 50% Expo
Rudder: 30 degrees left / 30 degrees right – 35% Expo
Elevator: 20 degrees / 20 degrees – 35% Expo
The CG is 190mm from the front leading edge on the root of the wing
Canard position
ARF Pro version (Accs., pre-installed)
2.34m JAS-39 jet with 3.5L fuel tank, fuel dot,fuel tank vent,servo connector wire, hardware,tail pipe, Electric retract gear with brake?preinstall navigator lights system, extra free scale cockpit, jet pilot, smoke system, wing bags, and maintenance stand supplied by teamaustars
FEATURES:
Full composite construction, lightweight and strong
INCLUDED HARDWARE:
Complete air frame (including fibreglass control horns)
Carbon fibre wing-tubes
Servo extension leads
Fixed Dual wall thrust pipe (for 100-190N turbines)
Fuel tank (3500ml)
Pre-prepared pushrods with ball links
Pre-glued control horns
REQUIRED HARDWARE:
Turbine: 120-240N
Servos: x7
x2 middle size servo,12-20kg
x5 standard size servo, 30-40kg
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
Product Display
COLOUR SCHEMES AVAILABLE:
Colour scheme A :
Colour scheme B :