Installment Payment Plan for modellers who want pay it weekly/monthly.

Just for Balance or shipping costs .

Pro version (metal servo arm)

Apollo VTOL-7500 is the sister of Apollo-3. Designed as a high performance unmanned aircraft for coastal surveillance and mining mapping, which is capable of up to 1-10 hour endurance with the 2-50 kg payload. With a small footprint of 237 inch wingspan, it can carry up to 50 kg of combined fuel and payload weight. Modular composite structure, fast assembly, large access hatches, removable payload bay, are the key features of the innovative design.

Available as an airframe ready for the autopilot and payload integration.

Production time: 1 month

System Training: TBA

Specifications
MTOW: 140 kg *
Empty Weight (excl fuel and payload): 35-38kg
Wing Span: 7500mm/237 inch
Length : 122 inch
Height: 0.84 m
Airframe width: 0.55 m
Fuel tank capacity: 30L
Engine: LIMBACH-L275E (optional)
Max Payload: 20-50 kg *
Takeoff method: Runway
Based on engine type and amount of fuel

Performance

Endurance: >7hr *
Cruise Speed: 120 km/h
Stall Speed: 70 km/h
Max Level Speed: 160 km/h
Takeoff run: 50-100 m

Based on engine type and amount of fuel

Features:

Sleek and efficient airfoil design gives best in class performance. Optimized for endurance, It has enough internal volume to lift 30 liters of fuel which will provide 8+ hours endurance. The high lift flap system provides stall speeds of <20 m/s, while giving excellent flight handling qualities due to a well designed Two-tailed geometry

PACKAGE OPTIONS

Option A: Complete ARF Plane with Power System (Airframe, Limbach Engine, E-Motors/ESCs/CF Props)

Option B: Complete ARF Plane, Power System, Servos, aviation plugs, it is PNP version with training included,

Option C: Complete ARF Plane, Power System, Servos, aviation plugs, Datalink (50km), autopilot, and GCS system, just need your Payload by yourself.

Contact us to upgrade Datalink to 200km

Summarize

CUAV XBEE Radio is a high-power, high-speed, high-reception sensitivity data transmission module

It has a built-in S3B RF module from the United States DIGI company, transmitting power up to 250mW, ISM 900MHZ legal frequency, supporting a variety of advanced network options and topology modes

The CUAV XBEE Radio module offers an unprecedented range of low-cost wireless data solutions. This module is easy to use and is especially suitable for unmanned unit networks and point-to-point over-the-horizon transmission, providing stable, critical data transmission between drones and equipment. Their small size saves valuable on-board space.

Characteristic

Ultra high receiving sensitivity

Highest -110dBm Receiver Sensitivity in Low Rate Mode

Long distance

The low-speed mode supports up to 14km.

High speed

Up to 200k air speed

CNC integrated shell

Aerospace aluminum alloy one-piece CNC housing, lightweight, strong, beautiful and anti-jamming

Parameter

Carbon fiber propellers from "Biela" with a great quality to price ratio. They come factory-balanced and certified to not exceed 8000 rpm. Those propellers are lightweight and very stiff with low level of noise. Center (mounting) part is reinforced with wooden block. Extra colour painting is possible with additional costs. Back surface is always painted black.

Technical data:

Type: 3 blades

Diameter: 20"

Pitch: 10"

Weight (abt.): 202 g

Hub bore diameter: 10 mm

Max. RPM: 8.000

Application: gas and electro engine

Austars model has now added a New Propeller to its all ready great range. The new Navigator propellers for model aircraft and paraglider have been designed for performance. Our pilots have tested and compared with the popular brands such as Menz, Vess, Bolly, Xoar, Bambula, Zinger and Topflight. The Navigator propeller has tested to have equal or greater performance with less noise on some of the brands which are recognized to be the best 3D props by some sports modeler's. The design of the Navigator propeller gives great RPM performance with a lower noise range great for the noise sensitive flying fields without affecting performance. We offer the new Navigator propeller as a high performance, quality guaranteed at a lower price. To celebrate the new release of the Navigator we are offering these propellers at an unbeatable introductory price. More videos for performance test will be available soon!

FEATURES

lConstructed from A-grade German Beech wood.

lComputer aided design & produced using CNC equipment.

lDesigned specifically for sports model planes.

lBalanced during every stage of production.

lHand balanced and checked.

lVisually examined and quality approved prior to completion to ensure perfect symmetry.

Note: A final check balance is always recommended before use due to external factors such as temperature or humidity changes between manufacture and when you receive which can affect the propeller.

Test report for Navigator popular propellers

DLE170 Needle bearing

Jingpin Hobby 120mm EDF Specification

Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.

- aluminium shroud body heat sink and cooler structure assures your motor will run cooler.

- The high rigid structure design is capable of running up to 88,000 RPM to produce extremely high efflux velocity

for maximum speed and efficiency

-Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement

for your plastic or carbon shroud if you want to have a safety EDF fan.

-Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been

tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring

a better and safer user experience for every RC fan.

SPECIFICATIONS:

• Material: Aluminum Alloy
• Weight: 24.5 oz./ 695g
• Rotor:12-bladed
• Outer Diameter: 123mm
• Inner Diameter: 120mm
• Inlet Ring: Removable
  

12S Li-Po Set Up:

• RPM: 33,744
  
• Kv Rating: 760
  
• Battery: 12s 44.4V
• Watt: 4972W
  
• Static Thrust: 16.6 lb./ 7.53kg(thrust) (Estimated)
• Start: Soft
• Timing: Low
• Amp Rating: 120-130HV amp esc or higher

Speed Control Advanced Timing Setting: 15 Degrees

VIDEO NOTE: While the video shows the edf unit operating on 39 and 40 volts, this is only for demonstration purposes and is not intended to run at this voltage in a jet. Doing so exceeds the motors parameters and can damage the motor. This is not covered under warranty.

Austars 60CM HD JR twisted servo extension lead (22 AWG)

Austars Heavy-duty extension leads are great for high torque servos when mounted far away from the receiver. They are made of 22 AWG in 60 strands and have gold connectors for solid contact and full voltage tranfer.

Length: 900mm. It is suitable for giant sports and scale planes. These HD leads had been used on Austars 122 inch Yak/edge, 110 inch Geebee R4, 150 inch DC-3, 157 inch Cessna, and Turbine jet.

HD Futaba Servo leads. Super special now.

EME35/DLE35/55/DA35/50/EME55-60 auto star switch

DLE170/170M/200 Paramotor air filters

DLE170/170M/200 Paramotor empty filter connectors

Carbon fiber propellers from "Biela" with a great quality to price ratio. They come factory-balanced and certified to not exceed 8000 rpm. Those propellers are lightweight and very stiff with low level of noise. Center (mounting) part is reinforced with wooden block. Extra colour painting is possible with additional costs. Back surface is always painted black.

Technical data:

Type: 3 blades

Diameter: 17"

Pitch: 10"

Weight (abt.): 142g

Hub bore diameter: 8 mm

Max. RPM: 8.000

Application: gas and electro engine

DLE40 Propwasher

DLE30 Propwasher

Attention

This is an "Exclusive Products" type group deal. The factory need the required quantity(5) to be reached, then the production starts. This time 20 units in total can be supplied.

Once the 5 orders are secured, the estimated time for dispatch will be one week after via EXPRESS.

To join in this group deal, full amount of deposit is required. If the targeted number is reached before the deadline, congratultions. You bought an awsome deal. Otherwise, you will be fully refunded if the deal is inactivated.

The time of availability and rate of progress are clearly marked under product.

Features:

Specifications:

VIDEO SUPPLIED BY CESAR YURI Specs: Total Weight - 19oz. (540g) 550 Brushed Motor - Input 3-15V (12V suggested) - We recommend the optional controller for ease of use. Use on DLE55, EME55, DLA56, SE55, EME60

Things you NEED to know: Some assembly is required. It is suggested that you are comfortable working on your motors. You will need to remove your prop hub and shaft. You will also need to install a gear with a one way bearing. Basic mechanical mentality/skill is suggested. No instructions included.

Add electric start to your bird. No more flipping a prop. Simply assign it to a switch and start your motor with the push of a butting/flip of a switch. Drive gear incorporates a one way bearing so power is not transferred back to the motor. Now with updated motor can be used on the 60CC Class motor as well.

Now with updated gears and motor.

Use for: DLE55, EME55, DLA56, SE 55, EME60

Or any motor with the same prop hub, mounting pattern, and crank as above.

DLE55RA users may need to drill an additional mounting hole

Does not fit DA 50, DA 60, DLE 60 Twin, O.S., JC, Zenoah, 15CC, 20cc, 30cc, 34cc, 40cc, 42cc, 111cc, 120cc, 170cc, your motorized bicycle, motorized skateboard, your weed eater, lawnmower, chainsaw, etc, etc, etc..

Carbon fiber propellers from "Biela" with a great quality to price ratio. They come factory-balanced and certified to not exceed 8000 rpm. Those propellers are lightweight and very stiff with low level of noise. Center (mounting) part is reinforced with wooden block. Extra colour painting is possible with additional costs. Back surface is always painted black.

Technical data:

Type: 3 blades

Diameter: 18"

Pitch: 10"

Weight (abt.): 150g

Hub bore diameter: 8 mm

Max. RPM: 8.000

Application: gas and electro engine

High performance in a compact package!

The DLE 35-RA features a rear exhaust for the perfect tuned pipe setup. It also includes a newly designed piston with re-engineered skirt for less piston weight - resulting in such advantages as awesome throttle response, more power and longer engine life. Producing 400 more rpm than the DLE30, the DLE 35-RA comes with engine standoffs, electronic ignition, spark plug and muffler.

• DLE electronic ignition - Electronic ignition is the no-hassle answer to simpler starts, higher performance and minimal RF noise.
• Loaded with "extras!" - With DLE, accessories are an added value instead of an extra cost.

Specifications:

• Displacement: 34.9 cc (2.13 cu in)
• Bore/Stroke: 1.5 in (38.5 mm)/1.17 in (30mm)
• Weight:
• Engine: 2.06 lb (936 g)
• Muffler: 2.61 oz (74 g)
• Ignition Module: 5.26 oz (211 g)
• Output: 4.1 hp @ 8,500 rpm
• Requires: Unleaded gasoline, oil, ignition battery & propeller
• Includes: Electronic ignition, muffler, spark plug, engine standoffs, integrated choke rod guide & rear-mounted carb
• Propeller: 19x8, 20x8, 20x10
• Ignition battery: 4.8-14 V (max)>=1200MAh
• Static Thrust: 9kg/7.8kg at 100/1800 Meter altitude
• Fuel: 2C petrol mixed 30:1-45:1
• 1 Year factory warranty covers defects in workmanship and materials

RC Airplanes Storage Rack Large - GST Inc

Introducing our newest addition: the RC Airplanes Storage Rack System, made by and under bananahobby.com. Experience the ultimate organization and protection for your RC airplanes with this stylish and efficient storage solution.

Choose the ideal fit for your planes from our two width options: 33.5" or 18".

Six adjustable locations enable personalized customization of the rack to accommodate various RC airplane sizes in terms of both height and width. Whether you own smaller planes or larger models, rest assured, we have you covered!

Crafted with high-grade steel for enhanced durability and strength, and thoughtfully designed with robust foam protection to ensure your valuable airplanes remain safe and sound.

Get your RC Airplane Storage Rack System now, and keep your aircraft collection organized like a pro pilot!

Product parameter:

Height:1800mm

Width:450mm(small) 850mm(big)

Length:805mm

Weight:about9000g

Specification:

Height 1800mm (71 in)

Width 850mm (33.5 in)

Depth 805mm (32 in)

The latest version HD petrol engine starter for petrol engine from 15-62cc. Our package includes dual drive cones (one big and one smaller) and rubber inserts

Features:

1. Upfront installed reduction gear box ratio: 6:1
2. Use the motor starter for 110cc motorbike
3. Independent power wire, easy to handle
4. Carbon fiber endplates & CF handle bar (light and rugged structure design, only 1.45kg)
5. 160cm HD long power cable & less internal resistance
6. Two power switches for fixed wing & helicopter
7. Multifunction for fixed wing and helicopter (smaller drive cone optional)
8. It can Super HD power clips , less electric impedance
9. be easily upgraded by lipo battery 3S 5000 mAh

Technical data:

1. 12-18 DC/ >9AH power supply (available from car parts shop)
2. Working current: 40A
3. 
   
4. 
   

Product Description

Austars model has now added a New Propeller to its all ready great range. The new Navigator propellers for model aircraft and paraglider have been designed for performance. Our pilots have tested and compared with the popular brands such as Menz, Vess, Bolly, Xoar, Bambula, Zinger and Topflight. The Navigator propeller has tested to have equal or greater performance with less noise on some of the brands which are recognized to be the best 3D props by some sports modeler's. The design of the Navigator propeller gives great RPM performance with a lower noise range great for the noise sensitive flying fields without affecting performance. We offer the new Navigator propeller as a high performance, quality guaranteed at a lower price. To celebrate the new release of the Navigator we are offering these propellers at an unbeatable introductory price. More videos for performance test will be available soon!

FEATURES

lConstructed from A- grade German Beech wood.

lComputer aided design & produced using CNC e quipment.

lDesigned specifically for&nbs p;sports model planes.

lBalanced during every stage of production.

lHand balanced and che cked.

lVisually examined and ;quality approved prior to co mpletion to ensure perfect sy mmetry.

Note: A final check&nbs p;balance is always recommended& nbsp;before use due to extern al factors such as temperatu re or humidity changes betw een manufacture and when y ou receive which can affect& nbsp;the propeller.

Test report for Navigat or popular propellers

Eric Warren's 108 inch PT-19 (scratch built) powered by DLE60 twin. Thanks Eric for your video!

DLE-60 twin 60cc petrol engine.

If you're looking for smooth, consistent performance in a 60cc engine, look no further. The DLE 60 Twin delivers that and more! Its twin opposed cylinders provide very smooth operation, while keeping weight low and producing the power your bird requires. Electronic ignition, spark plug and Pitts style mufflers are included.

Loaded with "extras!" - With DLE, accessories are an added value instead of an extra cost.

• DLE electronic ignition - Electronic ignition is the no-hassle answer to simpler starts, higher performance and minimal RF noise.
  
  Specifications:
• Displacement: 60 cc (3.7 cu in)
• Bore/stroke: 45mm x 35mm
• Compression ratio: 7.6:1
• Weight:
• Engine: 1560 g
• Muffler: 170 g
• Idle speed: 1500 RPM
• Ignition Module: 190 g
• Output: 7 hp @ 8,500 rpm
• Static thrust: 15.2/13.5 Kg at 100/1800 Meter altitude
• Requires: Unleaded gasoline, oil, ignition battery & propellers
• Includes: Electronic ignition, mufflers (2), spark plug & engine standoffs

• 1 year factory warranty covers defects in workmanship and materials.

Tattu Plus 22000mAh 22.2V 25C 6S1P Lipo Smart Battery Pack with AS150+XT150 plug

Notice:

This is a AS150 +XT150 plug Tattu 22000mAh 6S 25C Lipo Battery Pack, and there are EC5 plug and XT90 Plug lipo batteries for choosing, you can also check other batteries on our drone lipo battery page.

Tattu 22000mAh 6S1P 15C Lipo Battery Pack with AS150 +XT150 plug is a nice compact drone battery, with excellent build and assembly quality. This 12000mAh lipo battery is designed for multicopter. High power density technology of these battery ensure all 12000mAh are packed in a small size body, making the total weight is only 1620g. Low IR value of these batteries also provides stable voltage untill the end of your mission.

Features:

• Self-balancing function
• Self-discharge function at High Temperature storage
• Over voltage and undervoltage alert function
• Over Temperature and low temperature alert funtion
• Cell abnormal alert function
• Self-discharge function at 100%SOC Storage
• 
  

Specifications:

• Minimum Capacity: 22000mAh
• Configuration: 6S1P / 22.2V / 6 Cells
• Discharge Rate: 25C
• Max Burst discharge Rate: 50C
• Net Weight(±20g): 2,650g
• Dimensions: 213mm Length x 96mm Width x 69mm Height
• Charge Plug: micro USB+JST-XHR
• Discharge Plug: AS150+XT150

Tattu Plus, a smart battery specially designed for UAV. Protective casing give these batteries extra safety during the flight. Power lead is also longer then normal tattu batteries. Indication LED lights of the batteries can let you know how full of the capacity the batteries have when charging. Warning lights to give you indications of the tempreture, over/under charge, and cells banlence healthy leavel. These lipo batteries will also go into a intelegent storage mode when you are fully charge the btteries and decided to store away. The batteries itself will discharge in the storage mode to keep the votage in a certain level for storage. The amazing battery management system(BMS) will smartly manage your battery and extend your battery life. This BMS is a trend of Lipo batteries, it's the new generation of UAV batteries.

Application:

Tattu Plus 22000mAh 22.2V 25C 6S1P Lipo Smart Battery Pack with AS150+XT150 plug is best suited to DJI S1000, S1000+, OnyxStar FOX-C8-HD, Gryphon Dynamics X8, Gryphon Dynamics-12 DODECA, Gryphon Dynamics-8, etc.

Notice:

This is Tattu Plus 22000mAh 22.2V 25C 6S1P Lipo Smart Battery Pack with AS150+XT150 plug, if you need other plugs or lipos, you can check the following lipo batteries.

• Tattu 22000mAh 6S 25C 22.2V Lipo Battery Pack with AS150 +XT150 plug
• Tattu 22000mAh 14.8V 25C 4S1P Lipo Battery Pack with NA plug

You can also check more other drone lipo batteries.

Our Advantage:

1. Service-priority in online shop,like the long warranty period and the lower price for buyers.

2. Energy Density:Special adapted to each UAV type and RC car/boat/heli type. Very High according to capazity/weight.In

fact we are specialists of High Power Lipo Batteries.

It is our unique technology,the highest power of our battery is 100C.The another technology is our batteries are able to be stable discharged simultaneously

3. Low IR: Provides stable voltage untill the end of your mission

4. Safety: Gens ace and its' partners ful fill the ISO9001, ISO14001, standards

Austars are proud to introduce their new line of 2 blade wooden props. CNC from light weight yet stong beechwood and then clear coated to give that shinny impressive finish. At these prices you cant go past them.

Key features:

1. Imported German Beachwood
2. Digitally machined by CNC for accuracy
3. All factory balanced
4. Less noise and lightweight

Final balance check is suggested before flight due to the temperature /transport, which can cause the propeller unbalanced.

DLE takes 50cc performance to a new level with the rear exhaust DLE 55-RA. Everything about this engine screams performance, from the piston skirt - designed to be lightweight for quick throttle response and tons of power - to the rear exhaust that lets you easily install a tuned pipe in your aircraft. The 55-RA provides 100 more rpm than the standard DLE55. It includes engines standoffs, electronic ignition, spark plug and Pitts style muffler.

DLE electronic ignition - Electronic ignition is the no-hassle answer to simpler starts, higher performance and minimal RF noise.

• Loaded with "extras!" - With DLE, accessories are an added value instead of an extra cost.

Specifications:

• Displacement: 55.6 cc (3.39 cu in)
• Bore: 1.76 in (45 mm)
• Stroke: 1.37 in (35 mm)
• Weight:
• Engine: 2.9 lb (1325 g)
• Muffler: 3.17 oz (90 g)
• Ignition Module: 5.11 oz (145 g)
• Output: 5.5 hp @ 8,500 rpm
• Requires: Unleaded gasoline, oil, ignition battery & propeller
• Includes: Electronic ignition, muffler, spark plug, engine standoffs, integrated choke rod guide & rear-mounted carb
• Props: 22x8, 22x10, 23x8, 23x10
• Static thrust: 14.5 Kg/12.8 Kg at 100/1800 Meter altitude

• 1 year factory warranty covers defects in workmanship and materials.

50 DJ Jenny is made by Green Model. Photos and Video is avaliable online now! This plane had been reviewed by American and British RC magazines.

Wingspan: 1240mm (50inch)

Wingarea: 363.94sq.in

Length: 32.68 inch

Radio: 4 channels, 4-5 servos

Painted fiberglass cowl included

EVA dummy engine included

Landing gear: standard setup: tail dragger

For a brief time after the war, the U.S. Postal Service used a few Jennys for airmail service between Washington, D.C., Philadelphia, and New York. Ultimately, the thousands of surplus JN-4s in the U.S. were sold to private owners at bargain prices. Charles Lindbergh’s first airplane was a surplus Jenny – purchased in 1923 for $500. Many of these new owners used their Jennys to earn a living as stunt pilots. Flying from unprepared fields on the outskirts of towns, they thrilled audiences with daring exhibitions of wing-walking, aerial trapeze work, and low-level aerobatics.

22 AWG TWISTED FUTABA SERVO EXTENSION LEAD

DLE-20cc engine (Free postage).This is the best engine on the market to fit in Austars 98" Caribou so far!

Glow power isn't the only option anymore. The DLE-20 not only fills the displacement gap, but includes a beam mount to make the glow-to-gas upgrade drop-in fast and easy. A rear pumper carb simplifies installation and adjustment. A generous package of "extras" and electronic ignition for starting ease and top performance make the DLE-20 an attractive alternative to glow, and a solid buy for value and performance. RA version can help modellers to keep scale looking, now no need to cut the cowl to fit in the engine for these planes (P51, Spitfire etc).

DLE has anthorised Austars to provide very good after sales support and should any spares be required they are readily available.

Specifications:

Displacement: 20 cc (1.22 cu in)
Bore: 1.3 in (32 mm)
Stroke: 1.0 in (25 mm)
Weight: 28.9 oz (870 g)
RPM Range: 1,750-9,000
Output: 2.5 hp @ 9,000 rpm
Requires: unleaded gasoline, 2-cycle oil, ignition battery & propeller
Includes: electronic ignition, muffler, spark plug, gasket, bolts, throttle arm extension & manual
Suggested Propellers: 14x10, 15x8, 16x6, 16x8, 17x6

Technical Data:
Ignition Battery: 4.8-14 V Compression Ratio: 10.5:1
Gas/Oil Mix: 30-40:1(30:1 for breakin, 40:1 for quality synthetic thereafter)
Replacement Spark Plug: NGK CM6 (DLEG5510) or equivalent
Weight Breakdown: Engine: 22.9 oz (660 g); Muffler: 1.8 oz (80 g); Ignition: 4.2 oz (130 g)

1 year factory warranty covers defects in workmanship and materials.

DLE170/DLE170M/DLE222 Propwasher

Freewing Avanti S 12B 80mm 12 Blade inrunner EDF Sport Jet PNP Version

PRODUCT SPECIFICATIONS :

RCGF 30CC Twin Engine

Carbon fiber propellers from "Biela" with a great quality to price ratio. They come factory-balanced and certified to not exceed 8000 rpm. Those propellers are lightweight and very stiff with low level of noise. Center (mounting) part is reinforced with wooden block. Extra colour painting is possible with additional costs. Back surface is always painted black.

Technical data:

Type: 3 blades

Diameter: 22"

Pitch: 10"

Weight (abt.): 215 g

Hub bore diameter: 10 mm

Max. RPM: 8.000

Application: gas and electro engine

DLE170/DLE170M Propeller hub

Why the prices for Flite-Torque Servos are so low?

This is by new e-commerce channel "Manufacturer-End Customer" which saves all the costs in the middle. This does not get through traditional sales channel "Manufacturer-(Exporter)-Importer-Retail Shop-End Customer".

We respect all other brands. Our targeted market is "modellers chase quality/price value"

Flite-Torque Servo Project

Flite-Torque is a new brand on the market by Team Austars. Our objective is to supply full range high quality servos to satisfy our customers.Flite-Torque servos were first tested and demonstrated by our turbine jets and 800 class helicopters early this year. The performance for our servos in accuracy, centering, overshoot, torque, current-draw, plot speed aspects very impressed the public. Demo videos may reflect these very important aspects of our servos. Flite-Torque product line includes analogue, digital, brushless, coreless, HV, waterproof and covers all RC application.We select same IC (Integrated Circuit/Chip) and metal gear as few other big brands on the market and implement strict QC adopted by our Australia Standard. We target the market where modelers care about quality/performance and reasonable pricing (Check Bulky Buy Pricing).We give 1 year conditional warranty to make sure all our customers are happy with our service.All digital servos are programmable (For hobby industry, all technical data are Pre-programmed by the team, NO NEED TO re-program it except the use for other industries (Medical equipment etc)

Flite-Torque Analog MA105 MG Servo

Features: economic servo with durable metal gear

Best for indoor 3D plane or park flyer, scale plane.

Technical Data

Includes:

ANALOG MA 105 MG Servo (1 pc)
Accessory package (1 pc)

Austars model has now added a New Propeller to its all ready great range. The new Navigator propellers for model aircraft and paraglider have been designed for performance. Our pilots have tested and compared with the popular brands such as Menz, Vess, Bolly, Xoar, Bambula, Zinger and Topflight. The Navigator propeller has tested to have equal or greater performance with less noise on some of the brands which are recognized to be the best 3D props by some sports modeler's. The design of the Navigator propeller gives great RPM performance with a lower noise range great for the noise sensitive flying fields without affecting performance. We offer the new Navigator propeller as a high performance, quality guaranteed at a lower price. To celebrate the new release of the Navigator we are offering these propellers at an unbeatable introductory price. More videos for performance test will be available soon!

FEATURES

lConstructed from A-grade German Beech wood.

lComputer aided design & produced using CNC equipment.

lDesigned specifically for sports model planes.

lBalanced during every stage of production.

lHand balanced and checked.

lVisually examined and quality approved prior to completion to ensure perfect symmetry.

Note: A final check balance is always recommended before use due to external factors such as temperature or humidity changes between manufacture and when you receive which can affect the propeller.

Test report for Navigator popular propellers

TATTU is a popular battery for drones, The Tattu 25000mAh 6S 22.8V 10C LiPO battery pack with AS150+AS150 plug professional aerial photography equipment and UAV, VTOL. Less is more as the slogan: the single cell is 25000mAh, each cell connected in series, it is less in the whole industry, but TATTU is committed to providing more clients the perfect flight experience, no matter in the field of aerial photography, aerial video, aerial mapping, aerial inspections, agriculture, delivery etc.

Features:

- Stable automatical stacking technology makes the single cell capacity can reach 25000mAh
- The most strict single cell capacity, voltage, resistance, discharge curve matching process
- Superior Japan and Korea Lithium Polymer raw materials.
- Almost 200Wh/kg energy density.
- At least 150 times cycle life.
- Local after-sales service(located in Dublin, CA)

Specifications:

- Minimum Capacity: 25000mAh
- Configuration: 6S1P / 22.8V / 6 cells
- Discharge Rate: 10C
- Max Burst Discharge Rate: 20C
- Net Weight(±20g): 2542g
- Dimensions: 208mm Length x 90mm Width x 65mm Height
- Balancer Connector Type:JST-XHR-7P

Tattu 5200mAh 14.8V 35C 4S1P Lipo Battery Pack With XT60 Plug

Tattu 5200mAh 4S 14.8V 35C Lipo Battery Pack?is light and lets you move your battery weight around.

This is one of the most commonly used batteries for UAV, Drones, and RC cars. Made from the strong material for maximum performance. These 5200mAh 14.8V 35C 4S1P Lipo Batteries are the perfect combination of power and weight.

Tattu 5200mAh 4S 35C Features:

- Stable automatical stacking technology makes the single cell capacity can reach 5200mAh.
- The most strict single cell capacity, voltage, resistance, discharge curve matching process.
- Superior Japan and Korea Lithium Polymer raw materials.
- Local after-sales service(located in Dublin, CA).

Tattu 5200mAh 4S 35C Specs:

- Brand:Tattu
- Capacity:5200mAh
- Voltage:14.8V (4S)
- Discharge Rate:35C
- Max Burst Discharge Rate:70C

Tattu 5200mAh 4S 35C Application:

Redcat Racing Everest Gen7 PRO, Crawlers, Stampede, Slash 4X4 Ultimate, Slash VXL, Stampede 4X4 VXL, E-Maxx (Brushless #3908), E Revo, E Revo Brushless, Rustler, Rustler VXL, Slash 4x4, Slash 4X4 Platinum, Stampede VXL, Savage Flux 2350, Blitz ESE, Blitz, Savage Flux HP, Vorza, E-Firestorm 10T Flux Brushless, E Firestorm 10 HT, SC10 Factory Team Kit, SC10 Brushless 2.4 GHz, SC10 Short Course Race Truck, SC8e, RC8Be, RC10B4.1 Factory Team Kit, RC10B4.1 RTR, RC10T4.1 RTR Brushless, TC6 Factory Team, RC10R5 Oval Factory Team, AX10 Scorpion, ReadyLift XXX-SCT Bind-N-Drive 1/10th, Ready Lift XXX-SCT RTR, Strike Bind-N-Drive, Strike RTR, Speed-T Brushless Truck, Night Crawler RTR, Night Crawler Bind-N-Drive, Ultima DB, Ultima SC, SC-R, RT-5.

Our Advantage:

1.Service-priority in the online shop, like the long warranty period and the lower price.
2.Energy Density:Specially adapted to each UAV type and RC car/boat/heli type. Very High according to capacity/weight. In fact, we are specialists in High Power Lipo Batteries. It is our unique technology, the highest power of our battery is 100C. Another technology is our batteries are able to be stably discharged simultaneously
3.Low IR: Provides stable voltage until the end of your mission.
4.Safety: Gens Ace and its' partners fulfill the ISO9001, ISO14001, standards.

FlightLine RC Spitfire Mk.IX 1600mm (63 inch) Wingspan PNP RC Airplane

1, 5055-390KV brushless outrunner motor, 80A ESC,
2, 6 channel Radio
3, 6 Channel Receiver

The Supermarine Spitfire is one of the most popular warbirds in history. This British single-seat fighter was used famously by the Royal Air Force and the Allies, earning distinction during the Battle of Britain and throughout World War II. Over 20,300 aircraft were produced with more than 24 variants. The Spitfire's versatility and maneuverability in the hands of skilled pilots made it a lethal weapon against Axis forces. The timeless Spitfire continues to fly in modern times as a tribute to aviation history and military veterans.

After a large outpouring of requests from customers to upsize its smaller 1200mm Spitfire, FlightLine RC's 1600mm wingspan Spitfire Mk.IXc is approximately 1/7 scale and an entirely larger beast with all the bells and whistles we have come to expect from aircraft in the 1600mm Class. This Spitfire is molded from EPO foam, featuring a scale shape and smooth surface. The main wing is assembled from hollow foam parts and an interlocking plywood and carbon fiber frame, providing lower weight and higher strength than a solid foam wing. The main wing and horizontal tail are attached with screws for very convenient transport, and proper ventilation is also designed to keep the electronics cool. The large battery hatch and removable battery bay floor provides easy access to an organized battery and receiver compartment, including space for an optional flight stabilizer gyro.

This elegant model aircraft is equipped with a 5055-390KV brushless outrunner motor, 80A ESC, and scale 4-blade propeller. With the recommended 6S 4000-5000mAh lipo battery, the Spitfire MK.IXc has a level top speed of 125kph/75mph, with tall vertical power and 6-10 minutes of flight time depending on throttle management. Delivering capable grass handling performance, the main landing gear use shock absorbing Oleo struts, a main wheel diameter of 85mm, and a tail wheel diameter of 45mm. Metal reinforcement plates, 5mm thick steel strut pins and axles, and metal trunions work together with the suspension struts and soft wheels to dampen the forces caused by operating this aircraft on rough runways. The FlightLine RC 1600mm Spitfire Mk.IXc was optimized for sport scale performance, gentle handling, and an almost effortless flying experience, suitable for intermediate pilots and above. Importantly, a very predictable stall and power on recovery make the aircraft easy to control throughout all stages of flight. Day-Bright LEDs also aid in visibility of this large and beautiful foam electric model aircraft.

The FlightLine RC 1600mm Spitfire arrives completely painted. To personalize your Spitfire, included in the box are two optional decal sets, depicting the aircraft of Squadron Leader F.A.O. Tony Gaze (MA621 DV-A) and Lieutenant Michel Boudier (BS393 GW-Z

PRODUCT SPECIFICATIONS:

Product Description

NGH 38CC 4-Stroke Petrol Engine New Version

• Displacement: 37.97cc

  • Bore*Stroke (mm): 39*31.8
  • Compression ratio: 9
  • Carburetor: Walbro custom WT1022
  • RPM range: 1800-8000rpm
  • Spark plug type: CM-6
  • Break in fuel oil ratio: 25:1
  • General use fuel oil ratio: 35:1
  • Recommended propellers: 18*10, 19*8, 19*10, 20*8
  • Weight: 1310g

  Carburetor:

  • 1. This engine uses a Walbro custom WT1022 with a remade arm.
  • 2. Same adjustments as usual.

  Lubricating:

  • 1. There are two nipples on Intakemanifold.One pressurizesto carburetorfrom
  • crankcase, and one isforlubrication fromcarburetorto crankcase.
  • 2. There are two nipples on rear cover.
  • 3. Connect the nipples with fuel tubing separately.
  • Break?in procedure:
  • This engine still uses a high precision sleeve liner,so a lengthy break in period is
  • not necessary, howeveritis beneficialto follow the bench break in process below: 1. AllNGHengines are tested before shipment, lubricated, and packed well.
  • 2. For break in use 2 cycle oil at a ratio of 25:1, and general use with 35:1.
  • 3. Break in RPM is 3000RPM.
  • 4. Break in time is 30minutes.
  • 5. Break in is best performed without a using amuffler, howeverif noise is an issue
  • you can use the stockmuffler.

  Very important:

  • 1. Must connectlubricating nipples with fueltubing between rear cover and intake
  • manifold. Insufficientlubricating will damage the engine.
  • 2. Must use 2 cycle oilforlubricating, do not use 4 cycle oil.
  • 3. Valve gap is at 0.03 to 0.08mm.

Skywing-74" YAK 54 - GST Inc

ProductInformation

1. Advancedconstruction for today's demanding pilots

2. PATENTEDquick assembly canopy, wings and elevator systems EXCLUSIVE to Skywing

3. Fastassembly time with pre-hinged and pre-sealed ailerons and elevators

4. Factoryassembled detailed canopy interior

5. Removablerudder with single pin assembly

6. Incrediblevalue NOW WITH MATCHING SPINNER, fuel tank, fuel line, fuel and vent dot, wingand stab bags, as well as preinstalled high quality extensions.

7. cowl prefabricated cooling baffle

Technical Data

Wingspan	1876mm / 74“
Length	1817mmm / 71.5“
Wingarea	61.8dm2 / 958 sq.in
Weight	approx 4.75kg / 10.6lbs

Required accessories

Electric Motor	e.g. Dualsky XM6360EA-KV184
Electric Controller	e.g. Hobbywing Platinum 100A V3
Engine	25ccm - 35ccm
Servos electric	e.g. 5x CLI310 / CLI350 / CLI 380
Servos gasoline	e.g. 1x CLI130 + 5x CLI310 / CLI350 / CLI 380
Propeller elektric	20 x 10
Propeller gasoline	19 x 8
Akku electric Motor	e.g. 2x 6S 3300mAh / 3700mAh
Servo arm electric	e.g. 4x CLI Servoarm1,25" + 1x CLI Servoarm 2,5"
Servo arm gasoline	e.g. 5x CLI Servoarm1,25" + 1x CLI Servoarm 2,5"
Receiver, power supply

PACKAGE WITH MOTOR/ESC/PROPS/ AVAILABLE CHECK OUR ePower System to get the package deal. KV can be customised without any cost. TEAM AUSTARS WILL HELP AND PROVIDE 24/7 TECHNICAL ONLINE SUPPORT.

COMBO INCLUDES THE MOTOR, 14S/200A-280A/60VESC, & 1X T4013 CF PROPELLER

Austars model has now added a New Propeller to its all ready great range. The new Navigator propellers for model aircraft and paraglider have been designed for performance. Our pilots have tested and compared with the popular brands such as Menz, Vess, Bolly, Xoar, Bambula, Zinger and Topflight. The Navigator propeller has tested to have equal or greater performance with less noise on some of the brands which are recognized to be the best 3D props by some sports modeler's. The design of the Navigator propeller gives great RPM performance with a lower noise range great for the noise sensitive flying fields without affecting performance. We offer the new Navigator propeller as a high performance, quality guaranteed at a lower price. To celebrate the new release of the Navigator we are offering these propellers at an unbeatable introductory price. More videos for performance test will be available soon!

FEATURES

lConstructed from A-grade German Beech wood.

lComputer aided design & produced using CNC equipment.

lDesigned specifically for sports model planes.

lBalanced during every stage of production.

lHand balanced and checked.

lVisually examined and quality approved prior to completion to ensure perfect symmetry.

Note: A final check balance is always recommended before use due to external factors such as temperature or humidity changes between manufacture and when you receive which can affect the propeller.

Test report for Navigator popular propellers

PRODUCTION LEADING TIME: 30 days for 10, system integration: 1-2 weeks

Star-X series UAV with optimized design in 2023 were all integrated by TeamAustars with multiple task payloads and engines options for industrial & government customer markets. Star-X UAVs feature long endurance and optimized efficiency. The whole product lines include full composite and carbon fibre/CF two versions. CF version is upgraded by carbon fibre material in key structure surfaces.

Star-X VTOL-6500HP Pro can achieve long range around 900-1000km with EFI or HF Engines & 48L fuel tank for coastal reconnaissance. The wing of the aircraft has 4 x reinforced hardpoints to hook up task payload

Wingspan: 6500mm

Length: 3264mm

Height: 1170mm

Max take-off weight:160kg

Max. Payload Weight:40kg or 78kg/40liter fuel+33kg task payload

Cruise Speed:90km/h

Max. Cruise Flight Speed:150km/h

Economy Cruise Speed: 90km/h

Control radius:150-1000km(Customizable up to transceiver and SATCOM)

Max. climb speed:4m/s

Max. Descend speed:5m/s

Max. Altitude AMSL:3500-7000m (up to the engine option)

Max. Wind Resistance:13.9-17.1m/s (50-60km/h)

Operating temperature:-10~60 degree

Fuel Tank Capacity: 40L-48L

Flight Time:10h with Standard POD

Performance: 8h/25kg, 6h/40kg payload, Max 33kg payload/40L-48L fuel

Flight Distance:900km-1000km

Battery compartment size: 220 x 380 x 200mm

Task payload compartment size: 670 x 350 x 300mm

FC compartment size: 220 x 380 x 80mm

Product key features:

• 1.Excellent rain-proof design to meet up worst weather conditions.
• 2.Hybrid power with Carburettor, EFI, Heavy fuel option to reach long endurance 12Hours.
• 3.Modular design for fast deployment by PNP less 10 mins
• 4.Switchable multi-functional task payloads for SATCOM, SAR, Airborne PDT, POD, and Telecom Relay
• 5.Reinforced 4 x hardpoints 15kg/each hardpoint for laser guided fire rescue bomb or cargo transport.

Standard Kit package:

Complete UAV airframe

• Front cockpit cover
• Rear cockpit cover
• VTOL arm sets
• Fuel tank
• Navigation lights with controllable switch
• Front & Rear landing gears
• Transport Box: 232 x 142 x 110cm

Optional Engine: 250cc-340cc UAV engine, recommended Limbach 275 EFI, Limbach 288cc EFI or HFE, LID B2H-290 EFI, LID B2H-290D HFE, QRS 312cc B2G EFI or B2H Heavy Fuel engine

e-Power System Package (ePSP) recommended (Extra charge)

Customized e-Motors for VTOL x 4

Customized ESC for VTOL x 4

Industrial HD MG servos x 8

VTOL CF Propeller x 2 (Pair) + 1 x Pair spare (total 3 x Pairs)

Pusher engine propeller x 1

UAV Battery charger x 1

Build kit x 1

Airspeed sensor system with pitot (rainproof & deicing) DroneCAN Protocol x 1

UAV Lipo Batteries for VTOL power 16000mah/12S x 4 or equivalent battery configuration pack

Avionics wirings, connectors, DC power modules x 1 set

RC Controller Futaba 16CH or equivalent Radio SIYI MK15 for manual takeoff /landing x 1

Optional Datalink from 15-200km

Optional Professional/Military Ground Control Station (for PNP version, Teamaustars will help to integrate all together and test, which is included in Build service and Tuning & Flight test)

To help the end user team to save the time and costs, Team Austars provide "Build service" and "Tuning & Flight Test" with optional propulsion flight system (including well known flight controller , RTK positioning)

Optional Propulsion Flight System/(PFS) including:

Option A PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

Limbach 275cc 18KW EFI One key starter/generator 28V/1000W new BLS version x 1

Pusher engine propeller x 1

Muffler stacks x 2

Coupling kit for generator x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option B PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

Limbach 288cc 20KW EFI One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option C PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

Limbach 288cc 20KW Heavy Fuel/HF engine One key starter/generator 28V/1000W or 3000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option D PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

LID 290cc B2G 18.5KW EFI One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option E PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

LID 290cc B2H 18.5KW Heavy Fuel/HF Version One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option F PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

QRS 312cc B2G EFI Version engine One key starter/generator 24/2000W x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option G PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

QRS 312cc B2H Heavy Fuel Version engine One key starter/generator 24/2000W x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Three-screen ruggedized laptop/three-portable emergency command terminal is a standardized three-screen display and control terminal with high reliability, low power consumption, light weight.

The main structure material is made of aluminum alloy, the surface is conductively oxidized, and there are silica gel protective wrap angles around.

Interface standard electrical connector, 1 DC power port, 2 USB3.0 ports, 2 USB2.0 ports, 2 RS232 serial ports, 2 RJ45 network ports, 1 HDMI port, 1 DP, 1 3.5 Inch two-in-one audio port.

The display adopts three 15.6-inch 16:9 TFT LCD displays with a resolution of 1920*1080. The processor can choose Intel I7 desktop CPU, equipped with MXM notebook independent graphics card 1050/1060/1070/1080, and the memory supports 64G. , M.2 high-speed solid-state hard drive capacity is optional, support lithium battery life.

The panel can be integrated with custom joysticks, buttons, etc Preset.

Optional wireless module, support Wifi and Bluetooth, 4G network, built-in 2*3W speaker

Specifications

*System parameters

Processor: lntel I7-6700T processor

Lithium battery: 2.5 hours of battery life at room temperature

Memory: 16GB/DDR4 memory

Disk: 512G SSD

*I/O interface

Network port: 2 100/1000Mbps network ports

USB: 2 USB3.0 ports, 2 USB2.0 ports

VGA/HDMl: 1

Serial port: RS232*2

Power input: DC19V

*LCD screen

Display type: 15.6"FHD TFT LCD*3

Maximum resolution: 1920*1080

Display area: 344.16×193.59 mm

*Environmental parameters

Working temperature: -10~55?

Storage temperature: -20~60°?

*Institutional parameters

Material: Magnesium aluminum alloy

Colour: Black

Weight: 10.7Kg

Overall size: 416mm*316mm*117.8mm (including corner protection)

*Operating system

Windows 7 64 bit

This UAV catapult launcher is desgined and manufactured by Feiyu Tech, suitable for luanching X5, X8, Skycam and other fixed-wing aircrafts. Made with high quality aluminium alloy, the solid structure guarantees successful take-off of the fixed-wing aircraft.

Specifications:
- Max. luanching weight: 5kg
- Unfolding length: 2.5m
- Unfolding height: 0.9m
- Folded length: 1.1m
- Suitable for X5, X8, Skycam and other fixed-wing aircrafts (NOT RECOMMEND FOR X8 WITH MAX PAYLOAD)
- For professionals only.

Note: Empty launching or luanching with the weight under 2kg is NOT ALLOWED

Why the prices for Flite-Torque Servos are so low?

This is by new e-commerce channel "Manufacturer-End Customer" which saves all the costs in the middle. This does not get through tradional sales channel "Manufacturer-(Exporter)-Importer-Retail Shop-End Customer".

We respect all other brands. Our targeted market is "modellers chase quanlity/price value"

Flite-Torque Servo Project

Flite-Torque is a new brand on the market by Team Austars. Our objective is to supply full range high quality servos to satisfy our customers.Flite-Torque servos were first tested and demonstrated by our turbine jets and 800 class helicopters early this year. The performance for our servos in accuracy, centering, overshoot, torque, current-draw, plot speed aspects very impressed the public. Demo videos may reflect these very important aspects of our servos. Flite-Torque product line includes analogue, digital, brushless, coreless, HV, waterproof and covers all RC application. We select same IC (Integrated Circuit/Chip) and metal gear as few other big brands on the market and implement strict QC adopted by our Australia Standard. We target the market where modelers care about quality/performance and reasonable pricing (Check Bulky Buy Pricing). We give 1 year conditional warranty to make sure all our customers are happy with our service. All digital servosare programmable (For hobby industry, all technical data are Pre-programmed by the team, NO NEED TO re-program it except the use for other industries (Medical equipment etc)

Flite-Torque Digital D-506 MG high torque Servo

Features:

• Precision metal gears applied same as few big brands
• Strict production and quality control of plastic components ensures high performance
• This high torque servo is great for 50-150 cc airplanes, big crawlers, 1/5 scale vehicles, and robots.
• The only one available on the market with 20kg torque in digital

Technical Data?Dead band: 2μs 1520μs/330hz

Includes:

DIGITAL D-506 MG Standard Servo (1 pc)
Accessory package (1 pc)

Power generator system designed to supply 14+-0.5V 180W power for equipment inside or integrated with UAV. For long endurance UAV, power supply is very important for all the equipment inside. Complete DLE60CC UAV engine includes complete engine hardware, and power generator system. (Production time: 5 days for pre order only)

Power Generator System: Dual channel output. Output: 14+-0.5V (13.5-14.5V) Output current: 13-15A. 2 Yellow wires for module ouput. Max input voltage for the module:120V. Max Power for the module: 180W. Max Temperature: 200 C/degree.

DLE-60 twin 60cc petrol engine.

If you're looking for smooth, consistent performance in a 60cc engine, look no further. The DLE 60 Twin delivers that and more! Its twin opposed cylinders provide very smooth operation, while keeping weight low and producing the power your bird requires. Electronic ignition, spark plug and Pitts style mufflers are included.

Loaded with "extras!" - With DLE, accessories are an added value instead of an extra cost.

• DLE electronic ignition - Electronic ignition is the no-hassle answer to simpler starts, higher performance and minimal RF noise.
  
  Specifications:
• Displacement: 60 cc (3.7 cu in)
• Bore/stroke: 45mm x 35mm
• Compression ratio: 7.6:1
• Weight:
• Engine: 1560 g
• Muffler: 170 g
• Idle speed: 1500 RPM
• Ignition Module: 190 g
• Output: 7 hp @ 8,500 rpm
• Static thrust: 15.2/13.5 Kg at 100/1800 Meter altitude
• Requires: Unleaded gasoline, oil, ignition battery & propellers
• Includes: Electronic ignition, mufflers (2), spark plug & engine standoffs

• 1 year factory warranty covers defects in workmanship and materials.

JT-1000N 100kg Thrust Target Drone UAV Turbine Engine (Production & Test 14-21 days)

Technical indexes of engine

1. Overall dimensions of engine

1 Engine model and category JT—800N

2 Rotation direction of engine rotor: clockwise (looking back at engine inlet)

3 Overall dimensions of engine (± 2%)

2. Engine Technical Data

3.(1)Acceleration and deceleration delay of engine

Engine from idle to cart 15s.

Engine from cart to idle 15s.

Curve of thrust variation with altitude and velocity

Engine fuel consumption height (H) - speed (Ma) characteristics

Fuel consumption rate versus flight altitude and speed

quadcopter components have small permanent magnets made from iron and cobalt alloys. Using special alloys in the magnets makes them able to be smaller and lighter. Lithium-ion batteries are currently used to power drones as theweight to power storage ratio is better than any other battery. Efficiency wise, brushless motors are typically 85-90% efficient whereas a brushed DC motor is 75-80%. Windings are present on the rotor for a brushed motor as compared to in a stator for a brushless motor. he selection of an electric FPV Drone Motor has an enormous influence on the flight characteristics of the multicopter. Tiny variations in the construction of a motor result in significant impacts regarding the weight, responsiveness and total power of the multicopter.

DLE120 Gasket set

Designed and Produced by TeamAustars in January 2022 for helping all UMS engine owners worldwide. IT FITS MOKI ENGINE AS WELL

The package includes

• 1 x Drill guide/jig
• 2 x Screws & Washers to fit all props in
• 1 x Adaptor to fit 8mm-10mm centre hole/engine shaft
• 1 x Well designed packing box
• 
  
• Technical Data:
• Weight for Complete Drill Jig Set: 207g
• Weight for Packing/Gift Box: 30g (80 x 80 x 45mm Dimension)
• Total Weight: 237g

The Fantastic EME 120 Gasoline Engine!
A 120cc gasoline engine purpose built for high performance model airplane use.
An awesome performing, smooth running, affordable engine! The best value on the R/C market today!

Engine Highlights:
Great Design - Quality Castings
Improved Ported Cylinder Design
Improved Reed Block/Isolator Design
NSK Bearings
RCExl Ignition
Improved Metal Throttle Arm Walbro WJ-71 Carburetor!
Here are the specs:
Displacement: 120cc
Weight: 5.97 lbs (2.71kgs)
Output: 12.2 hp @ 7000RPM
Requires:
Unleaded gasoline (91-93 octane recommended)
Oil (Redline, Stihl HP Ultra recommended) at a ratio of 35:1
Ignition battery (4.8v - 6.0v)
Propeller - Recommended Props: 28x10, 28x12, 29x19 Closeup image of Walbro Carburetor: Closeup of Carb
Warranty EME (Eagle Master Engines) and as such provides the following Warranty for EME engines purchased through Austars Model Warranty ONLY applies to engines sold by US

Warranty Term: 18 months from date of purchase.
What is Covered: All Parts are guaranteed from the EME Factory to be free from manufacturing defects and will operate as stated.
What is NOT Covered: Damage or failures due to misuse, neglect, improper running(ex: running too lean, etc), prop strikes, or crash damage.
Customers are responsible for all shipping related costs associated with any
Warranty claims.
AUSTARS MODEL has a complete selection of Parts for EME engines

Product Information

1)Advanced construction for today's demanding pilots
2) PATENTED quick assembly canopy, wings and elevator systems EXCLUSIVE to Skywing
3) Fast assembly time with pre-hinged and pre-sealed ailerons and elevators
4) Factory assembled detailed canopy interior
5) Incredible value NOW WITH MATCHING SPINNER, fuel tank, fuel line, fuel and vent dot, wing and stab bags, as well as preinstalled high quality extensions.

Test device:

engine: GP38

Servos: Elevator Throttle?CLI-130*3)Aileron Rudder?CLI-310*3)

Propellor: 19 *8

power supply: 2S-2200mah *1

spinner: 3”?76mm)

servo arm: Elevator=1.5" *2 Aileron=1.5" *2 Rudder=1.5" *1

Test device:

Motor: dualsky GA3500R-KV200

ESC: Hobbywing Platinum 100A HV V3

Servos: Elevator ?CLI-130*2)Aileron Rudder ?CLI-310*3)

Propellor: 20*10

power supply: 6S-3700mah *2

spinner: 3”?76mm)

servo arm: Elevator=1.5" *2 Aileron=1.5" *2 Rudder=1.5"*1

REQUIRED:
1) 30-40cc Gas Engine*1pcs
2) Carbon Propeller (20x8, 20x9, 20x10)*1pcs
3) Digital High Speed Throttle Servo*1pcs
4) Digital High Torque Metal Gear Servos 40*20mm/20kg*3pcs 35*15mm/13kg*2pcs
5) 6" Extensions - aileron Throttle servos*3pcs
6) 1.5" Arms - tapped for 3mm hardware (ailerons x 2, elevator x 2 rudder x 1)

Product details photo

Tattu 22.8V 10C 6S 25000mAh LiPo Battery With XT90-S Plug

TATTU is a popular battery for drones, The Tattu 25000mAh 6S 22.8V 10C LiPO battery pack with XT90 plug £ºprofessional aerial photography equipment. Less is more as the slogan: the single cell is 25000mAh, each cell connected in series, it is ¡°less¡± in the whole industry, but TATTU is committed to providing ¡°more¡± clients the perfect flight experience, no matter in the field of aerial photography, aerial video, aerial mapping, aerial inspections, agriculture, etc.

Features:

- Stable automatical stacking technology makes the single cell capacity can reach 25000mAh
- The most strict single cell capacity, voltage, resistance, discharge curve matching process.
- Superior Japan and Korea Lithium Polymer raw materials.?
- Almost 200Wh/kg energy density.
- At least 150 times cycle life.
- Local after-sales service(located in Dublin, CA)

Specifications:

- Minimum Capacity: 25000mAh
- Configuration: 6S1P / 22.8V / 6 cells
- Discharge Rate: 10C
- Max Burst Discharge Rate: 20C
- Net Weight(¡À20g): 2577g
- Dimensions: 207mm Length x 91mm Width x 65mm Height
- Balancer Connector Type:JST-XHR-7P

Our Advantage:

1. Service-priority in the online shop, like the long warranty period and the lower price.
2. Energy Density: Specially adapted to each UAV type and RC car/boat/helicopter type. Very High according to capacity/weight. In fact, we are specialists in High Power Lipo Batteries. It is our unique technology, the highest power of our battery is 100C. Another technology is our batteries are able to be stably discharged simultaneously
3. Low IR: Provides stable voltage until the end of your mission.
4. Safety: Gens Ace and its' partners fulfill the ISO9001, ISO14001, standards.

• Compact design
• Brushless starter and telemetry functions
• 32Bit auto restart ECU
• Color screen data terminal
• CNC compressor wheel
• very fast throttle response
• Best cost/performance 80N turbine
• Build in FOD screen
• Silver/Rose Gold color can

Team Austars is the dealer for AU/NZ customer service and parts. Modellers from other states can purchase from us if you can not find local dealer. Local order with GST inc and local warranty & service. Our service center is in Brisbane by professional engineer. Stock shipping time around 5-7 days from global warehouse to Sydney and pass to the end user. Team Austars arrange all the documents to import and pay the local duty.

Thrust 80N
RPM Range 50,000 - 156,000
EGT 650 C
Fuel Consumption@ 155,000RPM 270g
Fuel kero or diesel
Lubrication 5% kero 3% diesel
Start full autostart
Restart auto restart
Weight 788g
Diameter 84mm
Length 203mm
Maintenance Interval 25 hours

Austars Heavy-duty extension leads are great for high torque servos when mounted far away from the receiver. They are made of 22 AWG in 60 strands and have gold connectors for solid contact and full voltage tranfer. We have 2 plug types in stock (Futaba and JR). All compatible with Futaba/JR/Hitec servos/receivers.

Length: 1600mm. It is suitable for giant sports and scale planes. These HD leads had been used on Austars 122 inch Yak/edge, 110 inch Geebee R4, 150 inch DC-3, 157 inch Cessna, and Turbine jet.

EACH BAG INCLUDES 2 X LEADS

Carbon fiber propellers from "Biela" with a great quality to price ratio. They come factory-balanced and certified to not exceed 8000 rpm. Those propellers are lightweight and very stiff with low level of noise. Center (mounting) part is reinforced with wooden block.

Technical data:

Type: 4 blade semiscale

Diameter: 14"

Pitch: 8"

Weight (abt.): 136 g

Hub bore diameter: 8 mm

Max. RPM: 8.000

Application: gas and electro engine

ENJET Bearing For Power E86/100 Turbine Engine

Gas prop Info
Falcon gas carbon fiber prop is suitable for different engine model aircraft, and with high efficiency and responsiveness, molds designed and created via CAD/CNC processes. Designs adjusted and optimized through real world testing by the world’s top flyers.Available in sizes 21? to 25?.
Specification
Diameter Pitch
21? 8, 10, 12.5
22? 8, 8W, 9, 10, 11, 12
23? 8, 8W, 9, 10, 11, 12
24? 8, 9, 10, 11, 12
25? 8W, 9, 10, 11, 12

DETAILS:

TATTU?is a popular?battery for drones, The?Tattu 22000mAh 6S 22.2V 25C LiPO battery pack?with XT90 plug?is the best choice to match?DJI S1000+?professional aerial photography equipment. Less is more as the slogan: the single cell is 22000mAh, each cell connected in series, it is ¡°less¡± in the whole industry, but TATTU is committed to providing ¡°more¡± clients the perfect flight experience, no matter in the field of aerial photography, aerial video, aerial mapping, aerial inspections, agriculture, etc.

Features:

- Stable automatical stacking technology makes the single cell capacity can reach 22000mAh
- The most strict single cell capacity, voltage, resistance, discharge curve matching process.
- Superior Japan and Korea Lithium Polymer raw materials.
- Almost 200Wh/kg energy density.
- At least 150 times cycle life.
- Local after-sales service(located in Dublin, CA)

Specifications:

- Minimum Capacity: 22000mAh
- Configuration: 6S1P / 22.2V / 6 cells
- Discharge Rate: 25C
- Max Burst Discharge Rate: 50C
- Net Weight(¡À20g): 2696g
- Dimensions: 206mm Length x 90mm Width x 63mm Height
- Balancer Connector Type:JST-XHR

Our Advantage:

1. Service-priority in the online shop, like the long warranty period and the lower price.
2. Energy Density: Specially adapted to each UAV type and RC car/boat/helicopter type. Very High according to capacity/weight. In fact, we are specialists in High Power Lipo Batteries. It is our unique technology, the highest power of our battery is 100C. Another technology is our batteries are able to be stably discharged simultaneously
3. Low IR: Provides stable voltage until the end of your mission.
4. Safety: Gens Ace and its' partners fulfill the ISO9001, ISO14001, standards.

Brand	Tattu
Capacity(mAh)	22000
Voltage(V)	22.2
Discharge Rate (C)	25
Max Burst discharge Rate (C)	50
Configuration	6S1P
Net Weight(±20g)	2490
Length(±5mm)	200
Width(±2mm)	91
Height(±2mm)	64
Connector Type	EC5
Wire Gauge	10#
Wire Length(mm)	120mm / 150mm
Balancer Connector Type	JST-XH

Tattu, the sister brand with Gens Ace,both of them are moving under Grepow who is the world leading high discharge rate lithium polymer battery manufacturer.

Tattu is designed specifically for the demands of the latest Unmanned Aircraft Vehicle, which can be used in military, security, survey and aerial filming. Such as DJI, Cinestar, Droidworx and other UAV drones.

Features:

- Stable automatic stacking technology enables single cell capacities of 30000mAh.

- Higher capacity than comparable size packs

- Longer Cycle Life, almost double that of standard lipoly technology.

Specifications:

- Capacity: 3000mAh
- Voltage: 22.2V / 6S / 6 Cell
- Discharge Rate: 25C
- Max Burst Discharge Rate: 50C
- Weight: 3673g
- Size: 205mm x 131mm x 66mm (L x W x H)
- Connector Type: AS150+XT150

Application:

Tattu batteries provide high quality, reliable power for UAV Drones.

About Tattu lipo batteries:

All Tattu LiPos are packed with vibration-proof & fire-proof material and our luxury battery box ensuring you get your battery in perfect condition. An automatic procedure & Computer system battery cell matching process ensures the batteries stability and quality. Different from the original Gens Ace series, TATTU is specialized for the UAV & UAS market, with their industrial quality (since Gens Ace is based on the Hobby area), their slogan "less is more", "more" means more flight time, more enjoyment, and more satisfaction , and "less" means less weight, simple design. Tattu always develops their products according to these 2 directions giving you a high quality battery.

Our Advantage:

1. Service-priority in the online shop, like the long warranty period and the lower price for buyers.
2. Energy Density: Specially adapted to each UAV type and RC car/boat/Heli type. High according to capacity/weight. In fact, we are specialists of High Power Lipo Batteries. It is our unique technology, the highest power of our battery is 100C. Another technology is our batteries able to be stably discharged simultaneously.

3. Low IR: Provides stable voltage until the end of your mission.

4. Safety: Gens ace and its partners fulfill the ISO9001, ISO14001 Standards

The difference in between 2015 version and 2019 version is "the production team can make optional/openable cowl and optional digital dashboard)

The world's largest composite 4 meter wingspan Cessna-182TC designed and produced by Tmmy Composite. Proudly distributed worldwide by Austars Model. Building threads available on the forums. This is the latest version upgraded by TeamTommy in August 2015. Upgraded feature includes the new engine cowling, which is openable, easy for modellers to check and install the engine.

Production time: 1-3 months (pre order only)

Freight quoted by TNT is door to door service. It can save $$ if you pick up from your local airport (but remember you need to pay your local broker service fee)

This is a ARTF giant scale plane! The package includes ARF kit, navigation lights, scale flap system (same as real Cessna-182 plane), 3D Dashboard, scale seats, interior decoration, aerial, does't include engine/servos/battery/radio.

Packing box: 121 x 65 x 58 cm (18kg)/F/fuselage

111 x 51 x 51 cm (13kg)/R/fuselage

181 x 60 x 31 cm (11kg)/wing

Version 2 has the openable cowling, more scale rivets,

Specifications:

Wingspan: 4.00 meter (157 inch)

Wing area: 1700 sq.in

Length:2.70 meter

Weight:25-35 kg (RTF)

Engine:120-210cc gasoline engine

Radio:5 channels 8 servos

Package includes:

1. Pre-built fuselage, wings and tail assemblies, wing tube, engine mount

2. Pre-installed navigation lights and landing light system

3. Pre-hinged aileron, flap, elevator, and rudder

4. Pre-installed push rods and servo tray

5. Pre-installed bulkhead & landing gear mount

6. Pre-painted body

7. Pre-molded rivets and panel line

8. Push rods, servo mount

9. Fuel tank 1500ml

10. Nose gear strut and alloy main gear

11. 6 inch wheel and 7 inch wheel/nose

12. Cockpit interior (3D dashboard, scale pilot seats)

13. Price for unpainted $ 4300 USD FOB THAILAND

Austars are proud to introduce their new line of 2 blade wooden props. CNC from light weight yet stong beechwood and then clear coated to give that shinny impressive finish. At these prices you cant go past them.

Key features:

1. Imported German Beachwood
2. Digitally machined by CNC for accuracy
3. All factory balanced
4. Less noise and lightweight

Final balance check is suggested before flight due to the temperature /transport, which can cause the propeller unbalanced.

PHIL TEAM PROJECT INCLUDES

2 X DLA180 ENGINE W/ ONE KEY STARTER/GENERATOR GST INC, EACH $4438 USD SUB TOTAL $8876 USD

3 X FALCON 32 X 10W , EACH $156 USD, SUBTOTAL $468 USD

3 X FALCON 32 X 12, EACH $156 USD, SUBTATAL $468 USD

TOTAL $9812 USD GST INC, FREE SHIPPING

This is a after-market auto starter for DLE111 (V3) or DA100, 3W106.

Motor must be 3542 KV900-1100, shaft is 4mm (optional)

Speed controller more than 60A. (optional)

Carbon fiber propellers from "Biela" with a great quality to price ratio. They come factory-balanced and certified to not exceed 8000 rpm. Those propellers are lightweight and very stiff with low level of noise. Center (mounting) part is reinforced with wooden block. Extra colour painting is possible with additional costs. Back surface is always painted black.

Technical data:

Type: 3 blades

Diameter: 22"

Pitch: 12"

Weight (abt.): 215 g

Hub bore diameter: 10 mm

Max. RPM: 8.000

Application: gas and electro engine

The latest version HD petrol engine starter for the big engine up to 250cc.

Features:

1. Upfront installed reduction gear box ratio: 5.6:1
2. Independent power wire, easy to handle
3. Carbon fiber endplates & metal handle bar (light and rugged structure design)
4. 160cm long power cable & less internal resistance

Technical data:

1. 12V DC/ >9AH power supply (available from car parts shop)
2. Runaway/idle speed 1000 RPM. >650 RPM (run with load)
3. Maximum torque: 120KG/CM
4. Super HD power clips , less electric impedance
5. 1 year warranty
6. 
   

Intoducing the brand new NGH GT9-Pro 9cc gas engine.

Complete with muffler, rcexl ignition and spark plug. 1/4 32

Product Specifications:

Type?2-Stroke AIR Cooled Gasoline Engine?Only used for fixed-wing aircraft model?

Volume?9.0cc Bore?23.3mm

Stroke?21mm Carburetor?NGH 20G-Pro Carburetor

Mix Output?1.2 HP/13000rpm RPM Range?2000-13500rpm

Ignition?NGH automatic advancing angle ignition (RoHS and CE Certified?Rcexl Manufactured)

Ignition Power?DC 4.8V - 8.4V 1000mAH Spark plug type?1/4 * 32

Fuel: standard 90 octane gasoline + FD 2-stroke oil Mixing ratio? gasoline : oil = 20:1

Recommended propeller?11×6?11x7?12×6?Two blades? Weight?engine 435g?ignition 100g

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

This scale helicopter comes with a complete scale mechanic! Only electronic components are needed!

• 12S 5000mAh Lipo battery, 30C +
• 700 size standard cyclic and tail metal geared servos, not HV equipment needed
• Align 750MX 450KV Motor HML75M02 (or same size and KV class, no lower KV recommended, main shaft needs to be equally long!)
• 3 Axis Gyro suitable for scale helicopters (e.g. Skookum 720, Bavarian Demon X)
• 7 channel RC system (electric retract system is included and requires aux channel for control)
• 120A HV ESC (govenor recommended but not necessary)

Description:
Robans new 700 size B 429 is now available. It's the second product in our Super Scale series.
Our new True Scale Design locates the cockpit exactly at the right spot, unlike on most canopies based on 3D mechanics. The compact mechanic is built into the engine compartment, just like on a real helicopter. Therefore it allows space for front to back scale cockpit seats. The position light system programmable with 9 different patterns is preinstalled.
The fuselage of the B 429 stands out through the detailed crafted surface details and the overall correctly scaled down shape. This unique scale look and details stun and make it hard to see the difference to a real helicopter.
The helicopter comes with a detailed instruction manual. The setup is simple and quick, the mechanics are completely preassembled. Only screw drivers and allen keys are required to make it airborne.

Features:

-Quad Blade Rotorhead and scale carbon fiber rotor blades included
- Quat Tail Blade and scale carbon fiber tail blades included
-Extremely detailed surface details, a realism unknown in this size class
- Complete seven seated scale cockpit
- Complete built in / preinstalled position lighting system (controllable via aux channel)
- Special CCPM mechanics built in the top section, as on a real helicopter
- Use of 750MX standard equipment (12S battery, 450KV motor), fly with your existing parts
- Take off weight of 8kg (about the double than a 700 3D helicopter)
- 1700mm long, exact 1/ scale
- Product comes preassembled and requires very few work to mobilize it

Spec:

Austars are proud to introduce their new line of 2 blade wooden props. CNC from light weight yet stong beechwood and then clear coated to give that shinny impressive finish. At these prices you cant go past them.

Key features:

1. Imported German Beachwood
2. Digitally machined by CNC for accuracy
3. All factory balanced
4. Less noise and lightweight

Final balance check is suggested before flight due to the temperature /transport, which can cause the propeller unbalanced.

The DLE-30 V2 is an aircraft engine which combines excellent quality at a very reasonable price. The DLE-30 makes an ideal first Petrol Motor and is well suited to scale aircraft up to around 80" wingspan, alternatively it is equally well suited to 3D / aerobatics aircraft of upto 75 inch.

V2 Now with Rear Mounted Carb ( Includes Engine Stand-off Mounts)

Performance.
1.3.7HP/8500rpm
2.Idle Speed: 1600 rpm/min
3.8.5Kg Static Thrust/ 100 meters Altitude
4.7.5Kg Static Thrust/ 1800 meters Altitude
5.Recommended props: 18 X 8; 18x10; 19x8; 20x8;
6.Spark Plug: NGK CM6 Ignition Module 4.8v - 14v

Parameter.
1.Cubic Capacity: 30.5cm3
2.Diameter x stroke: 36mm x 30mm
3.Compression Ratio: 7.6:1
4.Fuel Oil Ratio: 30:1
5.Weights: Main Engine - 910g; Muffler - 60g; 6.Ignition device - 120g; Engine mount - 20g

1 year factory warranty covers defects in workmanship and materials

DLE120 Piston ring

DLE55RA Needle bearing

Freewing Eurofighter Typhoon 90mm EDF Jet- 6S PNP Version

The Freewing Eurofighter is one of the most unique EDF jets in both looks and function, and now it's available in this all new 6S version for 2023 and beyond. This is not a retool of the old version. This is a 100% new Eurofighter. There were two big goals for this model. This model had to be fast and it had to be significantly more scale than the old version from years ago. In order to achieve speed and efficiency, a 100% new power system was created for this plane. The new version of the Eurofighter now includes a new 3668-1960Kv brushless inrunner motor with 100% new 12-blade EDF unit and 120A ESC with 8A/BEC for superior performance and sound. The new Eurofighter includes a thrust reversing function to slow the plane on shorter runways as well as an airbrake which will aid in high alpha maneuvers as well as slowing the plane down after landing.Features:

• NEW! Completely redesigned mold from front to back
• NEW! Completely new 12-blade factory-balanced EDF combined with 3668-1960Kv brushless inrunner motor produces top end EDF jet performance and realistic jet turbine sound
• NEW! 120 Amp OEM Hobbywing ESC with 8A UBEC
• NEW! Thrust Reversing function for shorter landings
• NEW! Functional scale air brake for high alpha and help with shorter runways
  
• Scale weapon set and pylons (10 total) included
• Flight surfaces are controlled with 9g and 17g digital metal gear servos for precise movement, strength and long life
• Bright LED landing and navigation lights for enhanced realism and dawn/dusk maneuvers
• Electronic retractable landing gear with CNC shock-absorbing struts and metal trunnions
• Scale, sequenced gear doors provide added realism and improved aerodynamics
• Upgraded pushrod clevis and metal ball head connectors provide a robust connection between servo and control surface and eliminate "play"
• Nylon hinges on all control surfaces (superior to foam hinges)
• 
  

Includes:

• Freewing Eurofighter Typhoon 6S 90mm EDF Jet - PNP
• Servos, EDF, brushless inrunner motor, lights, retracts and ESC all pre-installed
• Scale weapon set and pylons (10 total)

HRB 14.8V/4S1P 12000mAh 25C LiPo battery

Brand: HRB

SKU: HRBLP12000-4S1P-25C

Capacity: 12000mAh

Number of Cells: 4S1P

Voltage Output: 14.8V

Constant Discharge: 25C/300A

Max Burst Discharge: 50C/600A

Size: 183*70*36mm

Weight: 1018g

Max Charge Rate: 5C/60 A

Suggest Charge Rate: <2C/24 A

Discharge Plug: T,XT60,XT90

JST-XHR balance plug charge

Q'TY: 1P

Suitable For:

RC model Airplane, Helicopter, Racing Boat /Ship etc.

Austars model has now added a New Propeller to its all ready great range. The new Navigator propellers for model aircraft and paraglider have been designed for performance. Our pilots have tested and compared with the popular brands such as Menz, Vess, Bolly, Xoar, Bambula, Zinger and Topflight. The Navigator propeller has tested to have equal or greater performance with less noise on some of the brands which are recognized to be the best 3D props by some sports modeler's. The design of the Navigator propeller gives great RPM performance with a lower noise range great for the noise sensitive flying fields without affecting performance. We offer the new Navigator propeller as a high performance, quality guaranteed at a lower price. To celebrate the new release of the Navigator we are offering these propellers at an unbeatable introductory price. More videos for performance test will be available soon!

FEATURES

lConstructed from A-grade German Beech wood.

lComputer aided design & produced using CNC equipment.

lDesigned specifically for sports model planes.

lBalanced during every stage of production.

lHand balanced and checked.

lVisually examined and quality approved prior to completion to ensure perfect symmetry.

Note: A final check balance is always recommended before use due to external factors such as temperature or humidity changes between manufacture and when you receive which can affect the propeller.

Test report for Navigator popular propellers

Austars model has now added a New Propeller to its all ready great range. The new Navigator propellers for model aircraft and paraglider have been designed for performance. Our pilots have tested and compared with the popular brands such as Menz, Vess, Bolly, Xoar, Bambula, Zinger and Topflight. The Navigator propeller has tested to have equal or greater performance with less noise on some of the brands which are recognized to be the best 3D props by some sports modeler's. The design of the Navigator propeller gives great RPM performance with a lower noise range great for the noise sensitive flying fields without affecting performance. We offer the new Navigator propeller as a high performance, quality guaranteed at a lower price. To celebrate the new release of the Navigator we are offering these propellers at an unbeatable introductory price. More videos for performance test will be available soon!

FEATURES

lConstructed from A- grade German Beech wood.

lComputer aided design & produced using CNC e quipment.

lDesigned specifically for&nbs p;sports model planes.

lBalanced during every stage of production.

lHand balanced and che cked.

lVisually examined and ;quality approved prior to co mpletion to ensure perfect sy mmetry.

Note: A final check&nbs p;balance is always recommended& nbsp;before use due to extern al factors such as temperatu re or humidity changes betw een manufacture and when y ou receive which can affect& nbsp;the propeller.

Test report for Navigat or popular propellers

Material

Tyre :PU Rubber Foam
Wheel hub: ADZ12 CNC Machined ALUMINUM Alloy

Specifications:

Outer Dia. of Tyre : 127mm/5inch

Inner Dia. of Hub : 5mm

Height of Wheel : 46mm

Weight of Wheel : 169g

Modellers please contact your local hobby importers if they have the stock.

Quality fuel tank made by Aeroplus RC. Designed for all RC planes, ideal for 3D planes to prevent "oil leaking, or broken" when meeting vibration. Very light but very robust!

The props of Semiscale-Electro type are developed for model planes with electric drive. The small hub thickness (16 mm) and optimized weight combined with high efficiency are making this prop type special. There is also a suitable specially for the propeller developed prop spinner available.
They come factory-balanced and certified to not exceed 8000 rpm. Extra colour painting is possible with additional costs. Back surface is always painted black.

Technical data:
Type:	3 blade semiscale-electro
Diameter:	15"
Pitch:	10"
Weight (abt.):	95 g
Hub bore diameter:	8 mm
Propeller hub thickness:	16 mm
Max. RPM:	8.000
Application:	electro engine

Product Description

Austars model has now added a New Propeller to its all ready great range. The new Navigator propellers for model aircraft and paraglider have been designed for performance. Our pilots have tested and compared with the popular brands such as Menz, Vess, Bolly, Xoar, Bambula, Zinger and Topflight. The Navigator propeller has tested to have equal or greater performance with less noise on some of the brands which are recognized to be the best 3D props by some sports modeler's. The design of the Navigator propeller gives great RPM performance with a lower noise range great for the noise sensitive flying fields without affecting performance. We offer the new Navigator propeller as a high performance, quality guaranteed at a lower price. To celebrate the new release of the Navigator we are offering these propellers at an unbeatable introductory price. More videos for performance test will be available soon!

FEATURES

lConstructed from A- grade German Beech wood.

lComputer aided design & produced using CNC e quipment.

lDesigned specifically for&nbs p;sports model planes.

lBalanced during every stage of production.

lHand balanced and che cked.

lVisually examined and ;quality approved prior to co mpletion to ensure perfect sy mmetry.

Note: A final check&nbs p;balance is always recommended& nbsp;before use due to extern al factors such as temperatu re or humidity changes betw een manufacture and when y ou receive which can affect& nbsp;the propeller.

Test report for Navigat or popular propellers

SkyWing 60"YAK54 70E 1.5M - GST Inc (in stock )

Product Information
1) Advanced construction for today's demanding pilots
2) Factory assembled detailed canopy interior

3) Pre-baffled cowling for maximum motor cooling

4) Fast assembly time with pre-hinged and pre-sealed ailerons and elevators

5) preinstalled high quality extensions.

6) Incredible value with carbon fiber wing tube, landing gear and tailwheel assembly.

7) Wing bag and electric spinner - INCLUDED

8) Skwying's PATENTED rapid assembly wing design!