SPECIAL ORDER FOR M TEAM W/DUAL CLEARANCE SERVICE AND AIR FREIGHT 2 X SETS COST

Shipping box (included wing box and fuselage box)

Shipping box (included wing box and fuselage box)

Shipping box (included wing box and fuselage box)

STD VERSION INCLUDES:

PNP COMPELTE

COMPLETE AUTOPILOT SYSTEM

PIXSURVEY V3 CUBE AUTOPILOT

PIXSURVEY V3 8G SIMCARD/CARD READER

PIXSURVEY V3 GPS & COMPASS/MAIN BOARD/POWER MANAGEMENT BOARD/POWER SWITCH/AIRTUBE & PART

COMPLETE DATALINK

PIXSURVEY V3 DATALINK (AIREND)

PIXSURVEY 5DBI ANTENNA (AIREND)

CUSTOMISED DATALINK 900MHZ (GROUNDEND)

DATALINK DATA CABLE TYPE-C (GROUNDEND)

38DBI HIGHGAIN OMNI DIRECTIONAL ANTENNAL (GROUND END)

COMPLETE TX/RX

WFLY7 SYSTEM WITH CHARGER (BATTERY NOT INCLUDED DUE TO AIRLINE RESTRICTION, GET IT FROM YOUR LOCAL HOBBYSHOP)

STD VERSION INCLUDES:

PNP COMPLETE WITH AUTOPILOT & DATALINK COMPLETE & TX/RX

Shipping box (included wing box and fuselage box)

THIS IS THE UPGRADED VERSION IN JULY 2021 BY THE TEAM WITH REINFORCED FRONT ENGINE MOUNT BY CARBON FIBER 2MM AND INCREASED THICKNESS OF FRONT NOSE

STD VERSION INCLUDES:

PNP COMPELTE

COMPLETE AUTOPILOT SYSTEM

PIXSURVEY V3 CUBE AUTOPILOT

PIXSURVEY V3 8G SIMCARD/CARD READER

PIXSURVEY V3 GPS & COMPASS/MAIN BOARD/POWER MANAGEMENT BOARD/POWER SWITCH/AIRTUBE & PART

COMPLETE DATALINK

PIXSURVEY V3 DATALINK (AIREND)

PIXSURVEY 5DBI ANTENNA (AIREND)

CUSTOMISED DATALINK 900MHZ (GROUNDEND)

DATALINK DATA CABLE TYPE-C (GROUNDEND)

38DBI HIGHGAIN OMNI DIRECTIONAL ANTENNAL (GROUND END)

COMPLETE TX/RX

WFLY7 SYSTEM WITH CHARGER (BATTERY NOT INCLUDED DUE TO AIRLINE RESTRICTION, GET IT FROM YOUR LOCAL HOBBYSHOP)

STD VERSION INCLUDES:

PNP COMPLETE WITH AUTOPILOT & DATALINK COMPLETE & TX/RX

Shipping box (included wing box and fuselage box)

Shipping box (included wing box and fuselage box)

Shipping box (included wing box and fuselage box)

Shipping box (included wing box and fuselage box)

Shipping box (included wing box and fuselage box)

THIS IS THE UPGRADED VERSION IN JULY 2021 BY THE TEAM WITH REINFORCED FRONT ENGINE MOUNT BY CARBON FIBER 2MM AND INCREASED THICKNESS OF FRONT NOSE

RTF VERSION INCLUDES:

• PNP COMPELTE
• COMPLETE AUTOPILOT SYSTEM
• PIXSURVEY V3 CUBE AUTOPILOT
• PIXSURVEY V3 8G SIMCARD/CARD READER
• PIXSURVEY V3 GPS & COMPASS/MAIN BOARD/POWER MANAGEMENT BOARD/POWER SWITCH/AIRTUBE & PART

COMPLETE DATALINK

• PIXSURVEY V3 DATALINK (AIREND)
• PIXSURVEY 5DBI ANTENNA (AIREND)
• CUSTOMISED DATALINK 900MHZ (GROUNDEND)
• DATALINK DATA CABLE TYPE-C (GROUNDEND)
• 38DBI HIGHGAIN OMNI DIRECTIONAL ANTENNAL (GROUND END)

COMPLETE TX/RX

WFLY7 SYSTEM WITH CHARGER (BATTERY NOT INCLUDED DUE TO AIRLINE RESTRICTION, GET IT FROM YOUR LOCAL HOBBYSHOP)

CAMERA SYSTEM

• A7R CAMERA MOUNTING BASE ANTI VIBERATION
• A7R CUSTOMISED CABLE
• A7R CAMERA BATTERY

RTF Plus Version Includes:

• RTF System
• 6 x TATTU/SIMILAR 16000MAH/6S BATTERY & CHARGER
• 1 x Voltage monitor

RTF PPK Version includes

• RTF Plus
• 2 X TATT/SIMILAR 16000/6S BATTERY
• 1 X PPK 8T MODULE
• 1 X PPK ANTENNA
• 1 X PPK ANTENNA CABLE/POWER CABLE
• TOOL BOX WITH POWER ADAPTOR FOR ALL RTF RTF PLUS RTF PPK VERSIONS

Fighter Aerial survey drone Air Transport Case
Size: 1280*360*530mm
Weight : 13.7KG

Shipping box (included wing box and fuselage box)

Shipping box (included wing box and fuselage box)

Shipping box (included wing box and fuselage box)

SPECIAL ORDER FOR LOCAL SA TEAM 3 systems Freight/GST INC (PO:AU260409-S04)

LEADING TIME: 3-4 weeks door to door
===============================================================

Shipping box (included wing box and fuselage box)

SPECIAL ORDER FOR LOCAL SA TEAM 2 systems Freight/GST INC (PO:AU260409-S03)

LEADING TIME: 3-4 weeks door to door
===============================================================

Shipping box (included wing box and fuselage box)

Special order for the team from Singapore with shipping Mark to the depot . THIS IS 4+1 PNP version or 4+2

Shipping box (included wing box and fuselage box)

Apollo VTOL-7500 is the sister of Apollo-3. Designed as a high performance unmanned aircraft for coastal surveillance and mining mapping, which is capable of up to 1-10 hour endurance with the 2-50 kg payload. With a small footprint of 237 inch wingspan, it can carry up to 50 kg of combined fuel and payload weight. Modular composite structure, fast assembly, large access hatches, removable payload bay, are the key features of the innovative design.

Available as an airframe ready for the autopilot and payload integration.

Production time: 1 month

System Training: TBA

Specifications
MTOW: 140 kg *
Empty Weight (excl fuel and payload): 35-38kg
Wing Span: 7500mm/237 inch
Length : 122 inch
Height: 0.84 m
Airframe width: 0.55 m
Fuel tank capacity: 30L
Engine: LIMBACH-L275E (optional)
Max Payload: 20-50 kg *
Takeoff method: Runway
Based on engine type and amount of fuel

Performance

Endurance: >7hr *
Cruise Speed: 120 km/h
Stall Speed: 70 km/h
Max Level Speed: 160 km/h
Takeoff run: 50-100 m

Based on engine type and amount of fuel

Features:

Sleek and efficient airfoil design gives best in class performance. Optimized for endurance, It has enough internal volume to lift 30 liters of fuel which will provide 8+ hours endurance. The high lift flap system provides stall speeds of <20 m/s, while giving excellent flight handling qualities due to a well designed Two-tailed geometry

PACKAGE OPTIONS

Option A: Complete ARF Plane with Power System (Airframe, Limbach Engine, E-Motors/ESCs/CF Props)

Option B: Complete ARF Plane, Power System, Servos, aviation plugs, it is PNP version with training included,

Option C: Complete ARF Plane, Power System, Servos, aviation plugs, Datalink (50km), autopilot, and GCS system, just need your Payload by yourself.

Contact us to upgrade Datalink to 200km

Made by Professional team for Professional industrial customers to achieve long endurance & large payload task. This aircraft is made of Carbon fibre composite material.

Production: 2-4 Weeks. Contact us for intl air/sea freight

Features:

Maximized & Optimized structure strength by Carbon Fibre composite

Zero aerodynamic resistance with combined design of aerodynamics and aesthetics

Aerodynamic design with forward & positive-dihedral front wing & arc dihedral real wing (Tandem Wing)

Large cabin for optional payload Max 45kg

Modularized compartment design for power system

PNP wing structure with Aviation class plugs and own Datalink

Fast deployment to RTF less 10 Mins

24/7 Technical support by Teamaustars

Package ARF /PNP includes: $79000 USD (Base Price)

Complete ARF in white/Silver body with CF fuel tank

1 X Pusher Propeller for rear petrol engine

4 X 24S HV Motors

4 X HV ESC

4 X CF Propellers (2 X Pairs)

4 X HD Servos

1 X Hardware Pack

1 X Transport Box (Aviation Class with wheels 305 x 80 x 95 cm)

1 X System Adjustment/Test (except running engine)

8 X 8000 mAh (6S) 25C LIPO or Equivalent Configuration

1 X Airspeed sensor system with pitot (Rain-proof and de-icing) DroneCAN Protocol

1 x Avionics wirings, UBEC, connectors, DC power modules x 1 set

1 x RC Controller H16CH or equivalent Radio SIYI MK15 for manual takeoff /landing

1 x CUAV X7+ Pro autopilot x 1+CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1 or Advanced Dual RTK with 1 x Compass (backup)

Optional Datalink from 15-200km

Optional Professional/Military Ground Control Station (for PNP version, Teamaustars will help to integrate all together and test, which is included in Build service and Tuning & Flight test)

Optional industrial camera or Military POD

To help the end user team to save the time and costs, Team Austars provide "Build service" and "Tuning & Flight Test" with optional propulsion flight system (including well known flight controller , RTK positioning)

1 X Petrol/Gas engine (Optional) FOR PNP OPTION

PNP OPTION A: DLE170cc EFI/Generator ($79000 USD FOR PNP with ARF package)

PNP OPTION B: DLE170ME EFI Starter & Generator

PNP OPTION C: DLA180cc EFI ENGINE/One Key Starter/Generator

PNP OPTION D: QRS183cc EFI ENGINE/One Key starter/Generator (Recommended TBO:300H)

PNP OPTION E: QRS183cc Heavy Fuel Enginie/One Key Starter/Generator

PNP OPTION F: LID170cc B2G EFI Engine/One Key Starter/Generator (Recommended TBO:300H)

PNP OPTION G: DA170 EFI/Generator or DA215 EFI

Wingspan Length Height Petrol Engine MTOW Payload w/Fuel Cruise speed Effective Altitude endurance Climb speed Temperature Range Wind resistance

3.52M/Front Wing, 5.11M/Real Wing 2.67M-2.91M (including engine) 92.9CM 170cc-200cc (Carby/EFI/HF engine) 95kg 45kg 115km/Hour 5000-9000Meter up to Carburettor/EFI/HF engine option 10 Hours (8H /20kg Payload approved/tested) 4M/S -20C to +50C degree VTOL/ LEVEL 5, CRUISING LEVEL 6

Made by Professional team for Professional industrial customers to achieve long endurance & large payload task. This aircraft is made of Carbon fibre composite material.

Production: 1-3 Weeks. Contact us for intl air/sea freight

Features:

Maximized & Optimized structure strength by Carbon Fibre composite

Zero aerodynamic resistance with combined design of aerodynamics and aesthetics

Aerodynamic design with forward & positive-dihedral front wing & arc dihedral real wing (Tandem Wing)

Large cabin for optional payload Max 15kg

Modularized compartment design for power system

PNP wing structure with Aviation class plugs and own Datalink

Fast deployment to RTF less 10 Mins

24/7 Technical support by Teamaustars

Package PNP includes:

Complete ARF in white/Silver body with CF fuel tank

1 X Pusher Propeller for rear petrol engine

4 X 12S HV Motors

4 X HV ESC

4 X CF Propellers (2 X Pairs)

4 X HD Servos

1 X Hardware Pack

1 X Transport Box (Aviation Class with wheels 205 x 60 x 75 cm)

1 X System Adjustment/Test (except running engine)

4 X 8000 mAh (6S) 25C LIPO

1 X Airspeed sensor system with pitot (Rain-proof and de-icing) DroneCAN Protocol

1 x Avionics wirings, UBEC, connectors, DC power modules x 1 set

1 x RC Controller H16CH or equivalent Radio SIYI MK15 for manual takeoff /landing

1 x CUAV X7+ Pro autopilot x 1+CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

Optional Datalink from 15-200km

Optional Professional/Military Ground Control Station (for PNP version, Teamaustars will help to integrate all together and test, which is included in Build service and Tuning & Flight test)

Optional industrial camera or Military POD

To help the end user team to save the time and costs, Team Austars provide "Build service" and "Tuning & Flight Test" with optional propulsion flight system (including well known flight controller , RTK positioning)

1 X Petrol/Gas engine (Optional) FOR PNP OPTION

PNP OPTION A: DLE60cc EFI/Generator/Starter

PNP OPTION B: DLA64cc EFI One Key Starter/Generator/24/28V/400-600W

PNP OPTION C: DLA64cc HF ENGINE/One Key Starter/Generator 24/28V/500W

PNP OPTION D: QRS68cc EFI ENGINE/One Key Starter/Generator TBO:300 Hours (Recommended)

PNP OPTION E: QRS68cc Heavy Fuel Engine One Key Starter/Generator 24/28V/500W TBO: 300 Hours

PNP OPTION F: LID70cc B2G EFI ENGINE One Key Starter/Generator TBO: 300 Hours

Wingspan Length Height Petrol Engine MTOW Payload w/Fuel Cruise speed Effective Altitude endurance Climb speed Temperature Range Wind resistance

2.82M/Front Wing, 3.74M/Real Wing 2.02M 70CM 60-70cc (Carby/EFI/HF engine) or EMotor 35kg 15kg (5kg for electric version) 87-140km/Hour 5000-9000Meter up to Carburettor/EFI/HF engine option 10 Hours/8Kg Payload (2.5H/5Kg Electric version) 4M/S -20C to +50C degree VTOL/ LEVEL 5, CRUISING LEVEL 6

New version with X8 in coaxial propulsion mounts configuration.

The NAJA 5000 VTOL is originated the design of NAJA 4450 with wingspan extended to 5000mm to reach 8 hours endurance.

each boom is divided into two pieces for easy transport and intl freight , reinforced booms and internal ribs for the structure, built in VTOL motor mounts with 5 degree offset angle. With testing record, 27 liters fuel to reach 7 hours air endruance

SPECIFICATIONS:

• Main material: carbon fiber (CF version)
• Wingspan: 5000mm
• Length: 3500mm
• Maximum Width of Fuselage: 375mm
• Wing Area: 262 dm2
• Empty Weight: 26.5kg
• Maximum Take-off Weight: 90kg
• Maximum Speed: 150km/hr
• Stalling Speed: 55km/hr
• Payload (except tank plane still can load): 20 to 25kg
• Volume of Fuel Tank: 27L
• Maximum Flying Time: 6-8 Hours
• Equipments cabin size: 1000mm x 340mm x 350mm

* DLA 232 OR DLE 222 Engine x 1
* T-motor V13 60kv VTOL Motors x 8
* T-motor 24S 120A ESC x 8
* FliteTorque 45kg Servo x 4
* FliteTorque 28kg Servo x 3
* Savox 1250 Servo x 1
* 30″x10″ Forward Propeller x 1
* T-motor 40″ Carbon Fiber VTOL Propeller x 4 Pairs
* Long UAV Pitot Tube x 1
* Navigation LED lights x 1
* Build Kit x 1

Power Optional package B:

* DLA 232 EFI OR DLE 222 Engine EFI x 1 ONE KEY STARTER/GENERATOR VERSION
* T-motor V13 60kv VTOL Motors x 8
* T-motor 24S 120A ESC x 8
* FliteTorque 45kg Servo x 4
* FliteTorque 28kg Servo x 3
* Savox 1250 Servo x 1
* 30″x10″ Forward Propeller x 1
* T-motor 40″ Carbon Fiber VTOL Propeller x 4 Pairs
* Long UAV Pitot Tube x 1
* Navigation LED lights x 1
* Build Kit x 1

For Pusher engine options:

Limbach 200 EFI engine with one key starter/generator

DLE170 EFI engine 14V/180W or DA 170 EFI engine

For One Key Starter/Generator EFI or Heavy Fuel engine, visit our website

DLE170M EFI engine 14V/350W

DLA180 EFI Engine 24V/400W

LID 170 EFI/Heavy Fuel engine 24/400W

QRS 183 EFI/Heavy Fuel engine 24V/800W

Zonsen CD12I-I (170CC) AADI Tech Military Heavy Fuel engine 28V/600W

Standard Packing: Double box Card board

Optional Heavy Duty Industrial Packing box (3) for the aircraft

The NAJA 5000 VTOL is originated the design of NAJA 4450 with wingspan extended to 5000mm to reach 8 hours endurance.

each boom is divided into two pieces for easy transport and intl freight , reinforced booms and internal ribs for the structure, built in VTOL motor mounts with 5 degree offset angle. With testing record, 27 liters fuel to reach 7 hours air endruance

SPECIFICATIONS:

• Main material: carbon fiber (CF version)
• Wingspan: 5000mm
• Length: 3500mm
• Maximum Width of Fuselage: 375mm
• Wing Area: 262 dm2
• Empty Weight: 26.5kg
• Maximum Take-off Weight: 90kg
• Maximum Speed: 150km/hr
• Stalling Speed: 55km/hr
• Payload (except tank plane still can load): 20 to 25kg
• Volume of Fuel Tank: 27L
• Maximum Flying Time: 6-8 Hours
• Equipments cabin size: 1000mm x 340mm x 350mm

ePower System Option A

Epower EA128 KV 85 VTOL Motots x 4

• Epower 200A ESC 14S x 4
• Carbon fiber propellers 40x13 x 4 (2 x CW, 2 x CCW)

ePower System Option B

Epower EA128 KV 75 VTOL Motots x 4

• Epower 200A ESC 14S x 4
• Carbon fiber propellers 42x13 x 4 (2 x CW, 2 x CCW)

For Pusher engine options:

DLE170 EFI engine 14V/180W or DA 170 EFI engine

For One Key Starter/Generator EFI or Heavy Fuel engine, visit our website

DLE170M EFI engine 14V/350W

DLA180 EFI Engine 24V/400W

LID 170 EFI/Heavy Fuel engine 24/400W

QRS 183 EFI/Heavy Fuel engine 24V/800W

Zonsen CD12I-I (170CC) AADI Tech Military Heavy Fuel engine 28V/600W

Standard Packing: Double box Card board

Optional Heavy Duty Industrial Packing box (3) for the aircraft

*VTOL Flight 4500MIL is divided into two versions: VTOL Flight 4500MIL A and VTOL Flight 4500MIL B. VTOL Flight 4500MIL A is the standard version, and 4500MIL B is a customized version specially designed for large payloads such as lidar.

*VTOL Flight 4500MILA model adopts the design of redundant rudder surface, four-axis and eight-propeller hovering power, redundant flight control, EFI dual-cylinder gasoline engine, and hovering power dual power supply system, etc., so that all the points related to flight safety are The systems are designed with redundancy to provide customers with a safe and reliable platform for carrying valuable equipment.

Technical features:

*Based on safe system redundancy design, with automatic fault handling capability

*A single flight can carry two payloads at the same time

*Modular dual-task load compartment, customized integration scheme for user load

*Optional electronic fuel injection dual-cylinder steam/heavy oil engine to ensure stable operation in various environments

*High wing load airfoil design, 7-level wind resistance

*Fault-tolerant flight control system design, ten years of precipitation, military quality

*technical parameter:

Wingspan: 4.5m

Maximum battery life: 8h@5kg (for Model A), 6H/10kg (for Model B)

Full length: 2m

Maximum task load: 15kg (fuel + load)

Maximum take-off weight: 55kg

Wind resistance: Level 7

Take-off and landing method: vertical take-off and landing

Working environment: -20+50?

Power system: gasoline/heavy fuel optional (cruise), lithium battery (take off and land)

Cruising speed: 90-108km/h

Maximum flight speed: 144km/h

Mission radius: 100km (military quality data link); 800-2500km (4G network communication)

Equipment cabin volume: 760*230*160

Maximum ceiling: 5000m

Practical cruising altitude: 0-3000m

Maximum take-off altitude: 2500m

*technical parameter

At present, the VTOL Flight 4500MIL has been successfully adapted and operated normally with full-frame cameras, dual-light pods (visible light + infrared light), SAR radar + visible light, tilt photography system, laser mapping radar, Swiss methane gas laser leak detector, etc.

The VTOL Flight 4500MIL B laser surveying and mapping radar version has carried out normalized flight operations and services.

*Industry application

VTOL Flight 4500MIL A is suitable for long-distance route inspections (transmission lines, oil/gas pipelines, highways, coastlines, etc.) and large-scale regional operations (surveying and mapping, forest fire prevention, disaster search and rescue, etc.).

LiDAR System - Extra Charged
Intergrated long range laser scanner, high-precision IMU/GPS system and 50 million pixel camera, which can automatically collecting high accurate laser and image data via its onboard system controller, the system is able to genrate color point cloud in real time, and quickly obtain mapping results such as DOM, DEM, and 3D model.

*VTOL Flight 4500MIL is divided into two versions: VTOL Flight 4500MIL A and VTOL Flight 4500MIL B. VTOL Flight 4500MIL A is the standard version, and 4500MIL B is a customized version specially designed for large payloads such as lidar. Model B were exported to many countries for Mapping with the great record 400 sq.km2/day, its efficiency is 4 times more than unmanned helicopter.

*VTOL Flight 4500MILA model adopts the design of redundant rudder surface, four-axis and eight-propeller hovering power, redundant flight control, EFI dual-cylinder gasoline engine, and hovering power dual power supply system, etc., so that all the points related to flight safety are The systems are designed with redundancy to provide customers with a safe and reliable platform for carrying valuable equipment.

Technical features:

*Based on safe system redundancy design, with automatic fault handling capability

*A single flight can carry two payloads at the same time

*Modular dual-task load compartment, customized integration scheme for user load

*Optional electronic fuel injection dual-cylinder steam/heavy oil engine to ensure stable operation in various environments

*High wing load airfoil design, 7-level wind resistance

*Fault-tolerant flight control system design, ten years of precipitation, military quality

*technical parameter:

Wingspan: 4.5m

Maximum battery life: 8h@5kg

Full length: 2m

Maximum task load: 15kg (fuel + load)

Maximum take-off weight: 55kg

Wind resistance: Level 7

Take-off and landing method: vertical take-off and landing

Working environment: -20+50?

Power system: gasoline/heavy fuel optional (cruise), lithium battery (take off and land)

Cruising speed: 90-108km/h

Maximum flight speed: 144km/h

Mission radius: 100km (military quality data link); 800-2500km (4G network communication)

Equipment cabin volume: 760*230*160

Maximum ceiling: 5000m

Practical cruising altitude: 0-3000m

Maximum take-off altitude: 2500m

*technical parameter

At present, the VTOL Flight 4500MIL has been successfully adapted and operated normally with full-frame cameras, dual-light pods (visible light + infrared light), SAR radar + visible light, tilt photography system, laser mapping radar, Swiss methane gas laser leak detector, etc.

The VTOL Flight 4500MIL B laser surveying and mapping radar version has carried out normalized flight operations and services.

*Industry application

VTOL Flight 4500MIL A is suitable for long-distance route inspections (transmission lines, oil/gas pipelines, highways, coastlines, etc.) and large-scale regional operations (surveying and mapping, forest fire prevention, disaster search and rescue, etc.).

LiDAR System - Extra Charged
Intergrated long range laser scanner, high-precision IMU/GPS system and 50 million pixel camera, which can automatically collecting high accurate laser and image data via its onboard system controller, the system is able to genrate color point cloud in real time, and quickly obtain mapping results such as DOM, DEM, and 3D model.

Makeflyeasy Fighter VTOL Fixed Wing Carrier Composite Wing VTOL Aerial Survey 4+1 Mapping 2024 Version

Star-X series UAV with optimized design in 2023 were all integrated by TeamAustars with multiple task payloads and engines options for industrial & government customer markets. Star-X UAVs feature long endurance and optimized efficiency. The whole product lines include full composite and carbon fibre/CF two versions. CF version is upgraded by carbon fibre material in key structure surfaces.

Star-X VTOL-7400HP commercial drone was released in June 2025 and designed for cargo transport, Navy surveillance/reconnaissance with optimized aerodynamic structure & large fuel tank and payload. Standard fuel tank of 55 liters & 10-20 liter reserve soft fuel tank and 90kg payload weight (inc fuel). Two versions in ECO & Max with distance range up to 2000km by 290cc/390cc/590cc EFI engine configurations with one key starter/generator.

Standard Kit

Complete UAV airframe
Front cockpit cover
Rear cockpit cover
VTOL arm sets
Fuel tank
Navigation lights with controllable switch
Front & Rear landing gears

Wingspan: 7.35 Meter

Length: 3.97 Meter

MTOW 220kg

Max altitude: 4500-7000m (up to the engine selection, HF version can achieve long endurance)

Cruise speed: 135KM/H

Max speed: 180KM/H

Fuel tank: 55 liters included 10-20 liters reserve soft fuel tank (optional)

Max Payload: 90kg with fuel

Performance approved: 4Hours with 60kg task payload, 8Hours with 40kg task payload, 10Hours/30kg.

Engine: 290cc-590cc UAV EFI engine with one key starter/generator

e-Power System Package (ePSP) recommended (Extra charge)

Customized e-Motors for VTOL x 8

Customized ESC for VTOL x 8

Industrial HD MG servos x 8

VTOL CF Propeller x 4 (Pair) + 1 x Pair spare (total 5 x Pairs)

Pusher engine propeller x 1

Build kit x 1

Navigation lights x 1 set

Airspeed sensor system with pitot (rainproof & deicing) DroneCAN Protocol x 1

UAV Lipo Batteries for VTOL power 30000mah/12S x 4

UAV Lipo Battery Professional Charger x 2

Avionics wirings, connectors, DC power modules x 1 set

RC Controller Futaba 16CH FC24 or SIYI MK15 for manual takeoff /landing x 1

Optional Datalink from 15-200km

Optional Professional/Military Ground Control Station (for PNP version, Teamaustars will help to integrate all together and test, which is included in Build service and Tuning & Flight test)

To help the end user team to save the time and costs, Team Austars provide "Build service" and "Tuning & Flight Test" with optional propulsion flight system (including well known flight controller , RTK positioning)

Optional Propulsion Flight System/(PFS) including:

Option A PFS package:

CUAV X7+ Pro autopilot x 1 CUAV C-RTK 9Ps Positioning GNSS module x 2

Or Cube Orange+RTK Dual GPS

LID B2G 590 EFI One key starter/generator x 1

Pusher engine propeller x 1

Muffler stacks x 2

Coupling kit for generator x 1

7S Lipo battery for engine starter x 1

7S Lipo battery for internal avionics power x 1 (16000Ah)

Aviation Transport Box x 1 Set

Option B PFS package:

CUAV X7+ Pro autopilot x 1 CUAV C-RTK 9Ps Positioning GNSS module x 2

Or Cube Orange+RTK Dual GPS

Limbach 550 EFI One key starter/generator new version x 1

Pusher engine propeller x 1

Muffler stacks x 2

Coupling kit for generator x 1

7S Lipo battery for engine starter x 1

7S Lipo battery for internal avionics power x 1 (16000Ah)

Aviation Transport Box x 1 Set

Option C PFS package:

CUAV X7+ Pro autopilot x 1 CUAV C-RTK 9Ps Positioning GNSS module x 2

Or Cube Orange+RTK Dual GPS

LID B2G 390 EFI One key starter/generator x 1

Pusher engine propeller x 1

Muffler stacks x 2

Coupling kit for generator x 1

7S Lipo battery for engine starter x 1

7S Lipo battery for internal avionics power x 1 (16000Ah)

Aviation Transport Box x 1 Set

Option D PFS package:

CUAV X7+ Pro autopilot x 1 CUAV C-RTK 9Ps Positioning GNSS module x 2

Or Cube Orange+RTK Dual GPS

LID B2G 290 EFI One key starter/generator x 1

Pusher engine propeller x 1

Muffler stacks x 2

Coupling kit for generator x 1

7S Lipo battery for engine starter x 1

7S Lipo battery for internal avionics power x 1 (16000Ah)

Aviation Transport Box x 1 Set

Video filmed by Flypath team & ZeroZero with Thanks

Description:

Features:

- V-shaped bi-copter

- 50min flight time

- Tilt rotor control

- 3-axis mechanical gimbal

- 4K video

- 7km transmission distance

- Lower noise profile

- Tilt rotor technology

- Autofollow

- Obstacle Avoidance

- Trackshots

Package Included:

1 x V-Coptr Falcon Quadcopter

1 x Remote Controller

3 x 15.4V 4500mAh Lipo Battery

1 x Charger

1 x Charging Cable

2 x Spare Propeller

1 x Screwdriver

1 x Tripod

1 x Gimbal Protective Cover

1 x User Manual

1 x Storage Bag

Video filmed by Flypath team & ZeroZero with Thanks

Description:

Features:

- V-shaped bi-copter

- 50min flight time

- Tilt rotor control

- 3-axis mechanical gimbal

- 4K video

- 7km transmission distance

- Lower noise profile

- Tilt rotor technology

- Autofollow

- Obstacle Avoidance

- Trackshots

Package Included:

1 x V-Coptr Falcon Quadcopter

1 x Remote Controller

2 x 15.4V 4500mAh Lipo Battery

1 x Charger

1 x Charging Cable

2 x Spare Propeller

1 x Screwdriver

1 x Tripod

1 x Gimbal Protective Cover

1 x User Manual

1 x Storage Bag

Video filmed by Flypath team & ZeroZero with Thanks

Description:

Features:

- V-shaped bi-copter

- 50min flight time

- Tilt rotor control

- 3-axis mechanical gimbal

- 4K video

- 7km transmission distance

- Lower noise profile

- Tilt rotor technology

- Autofollow

- Obstacle Avoidance

- Trackshots

Package Included:

1 x V-Coptr Falcon Quadcopter

1 x Remote Controller

1 x 15.4V 4500mAh Lipo Battery

1 x Charger

1 x Charging Cable

2 x Spare Propeller

1 x Screwdriver

1 x Tripod

1 x Gimbal Protective Cover

1 x User Manual

1 x Storage Bag

Nimbus VTOL is a versatile platform with a long endurance and large payload capacity. Its tilt-rotor vertical take-off on landing (VTOL) design allows it to autonomously take-off and land in an area as small as 4m x 4m, while carrying up to 1000g of payload for up to 80 minutes. Using large front-tilting high-speed servos the Nimbus VTOL can hover like a multi-rotor more steadily and take-off and land in very heavy wind. The servos will even tilt to a certain level to compensate for wind, which keeps the plane steadier during take-offs and landings. Max flying speed for Nimbus is 35m/s, though average speed is around 14m/s (stall speed around 11m/s). Of course, Mission Control is fully supported with Nimbus for easy, fully autonomous surveying with precise camera triggering based on mission parameters. Nimbus’ payload capabilities are very adaptable, thanks to its 1000g max capacity and large available mounting volume.

VTOL KIT VTOL is a vertical take-off and landing (VTOL) aircraft is one that can hover, take off, and land vertically. This classification can include a variety of types of aircraft including fixed-wing aircraft as well as helicopters and other aircraft with powered rotors, such as cyclogyros/cyclocopters and tiltrotors.[1] Some VTOL aircraft can operate in other modes as well, such as CTOL (conventional take-off and landing), STOL (short take-off and landing), and/or STOVL (short take-off and vertical landing). Others, such as some helicopters, can only operate by VTOL, due to the aircraft lacking landing gear that can handle horizontal motion. VTOL is a subset of V/STOL (vertical and/or short take-off and landing). Some lighter-than-air aircraft also qualify as VTOL aircraft, as they can hover, takeoff, and land with vertical approach/departure profiles. Electric and hybrid-electric vertical takeoff and landing aircraft eVTOL is a technology being used in the quest for fully autonomous passenger air vehicles (PAV). Besides the ubiquitous helicopter, there are currently two types of VTOL aircraft in military service: craft using a tiltrotor, such as the Bell Boeing V-22 Osprey, and another using directed jet thrust, such as the Harrier family and new F-35B Lightning II Joint strike Fighter (JSF). In the civilian sector currently only helicopters are in general use (some other types of commercial VTOL aircraft have been proposed and are under development as of 2017). Generally speaking, VTOL aircraft capable of STOVL use it wherever possible, since it typically significantly increases takeoff weight, range or payload compared to pure VTOL.

FOR KIT VERSION

MOTOR/ESC/PROP/SERVO, DATALINK AND FLIGHT CONTROLLER, RADIO, BATTERY, CHARGER ETC WE DO NOT INCLUDE IN THE PACKAGE FOR THE KIT. ONLY INCLUDE

AIRFRAME & 1 X HEAVY DUTY PACKING BOX FOR RELOCATION

Recommended Set-up: (ePower System Optional A)

4 x T-motor MN605S 210KV

4 x Hobbywing 12S 80A ESC V4

2 x 2266 OR 2274 CF Propeller CW&CCW

1 x Hobbywing 12S 120A ESC

1 x Dualsky XM6360EA-22 KV190

1 x APC PUSHER 19*12 Propeller CW

4 x FlightTorque HV30MG servo or KST DS135MG Servo

1 x PX4 Air Speedometer

1 x Power Module For Pixhawk 2.1

1 x Pixhawk 2.1 Standard Set with Here 2 GNSS (OR 1 x X5 Autopilot/flight controller)

1 x Datalink & Videolink 10-15km

1 x 7 Inch Professional GCS

1 x FUTABA 14SG Radio Controller

2 x TATTU 6S 32000mAh battery FOR PUSHING

2 x Tattu 6S 8000mAh battery FOR LIFTING

1 x UBEC 10A TOP BRAND

1 x Professional Charger UP1200AC PLUS

1 x Heavy Duty Packing box for transport/relocation

Recommended Set-up: (ePower System Optional B)

4 x T-motor MN605S 210KV

4 x Hobbywing 12S 80A ESC V4

2 x 2266 OR 2274 CF Propeller CW&CCW

1 x Hobbywing 12S 120A ESC

1 x Dualsky XM6360EA-22 KV190

1 x APC PUSHER 19*12 Propeller CW

4 x FlightTorque HV30MG servo or KST DS135MG Servo

1 x PX4 Air Speedometer

1 x Power Module For Pixhawk 2.1

1 x Pixhawk 2.1 Standard Set with Here 2 GNSS (OR 1 x X7 Commercial Autopilot/flight controller) or S40 Professional autopilot

1 x Datalink & Videolink 30km

1 x FUTABA 14SG Radio Controller

1 x Professional GCS 13.3 Inch 1920x1180 resolution

2 x TATTU 6S 32000mAh battery FOR PUSHING

2 x Tattu 6S 8000mAh battery FOR LIFTING

1 x UBEC 10A TOP BRAND

1 x Professional Charger UP1200AC PLUS

1 x Heavy Duty Packing box for transport/relocation

VTOL is a vertical take-off and landing (VTOL) aircraft is one that can hover, take off, and land vertically. This classification can include a variety of types of aircraft including fixed-wing aircraft as well as helicopters and other aircraft with powered rotors, such as cyclogyros/cyclocopters and tiltrotors.[1] Some VTOL aircraft can operate in other modes as well, such as CTOL (conventional take-off and landing), STOL (short take-off and landing), and/or STOVL (short take-off and vertical landing). Others, such as some helicopters, can only operate by VTOL, due to the aircraft lacking landing gear that can handle horizontal motion. VTOL is a subset of V/STOL (vertical and/or short take-off and landing). Some lighter-than-air aircraft also qualify as VTOL aircraft, as they can hover, takeoff, and land with vertical approach/departure profiles. Electric and hybrid-electric vertical takeoff and landing aircraft eVTOL is a technology being used in the quest for fully autonomous passenger air vehicles (PAV). Besides the ubiquitous helicopter, there are currently two types of VTOL aircraft in military service: craft using a tiltrotor, such as the Bell Boeing V-22 Osprey, and another using directed jet thrust, such as the Harrier family and new F-35B Lightning II Joint strike Fighter (JSF). In the civilian sector currently only helicopters are in general use (some other types of commercial VTOL aircraft have been proposed and are under development as of 2017). Generally speaking, VTOL aircraft capable of STOVL use it wherever possible, since it typically significantly increases takeoff weight, range or payload compared to pure VTOL.

Star-X series UAV with optimized design in 2023 were all integrated by TeamAustars with multiple task payloads and engines options for industrial & government customer markets. Star-X UAVs feature long endurance and optimized efficiency. The whole product lines include full composite and carbon fibre/CF two versions. CF version is upgraded by carbon fibre material in key structure surfaces.

Star-X VTOL-8000 composite drone was released in early 2024 and designed for cargo transport, emergency rescue etc with its unique dual engines for safety redundancy. With 75kg payload weight with fuel included. Max endurance can reach around 400 km range by 2 x normal Carby 170cc engines, 500-650km by EFI or Heavy Fuel Engine. The system can be upgraded to Limbach 220cc Heavy fuel engine, or eco engine DA215/DLE222/DLA232 EFI engine to save more fuel. With optional upgraded fuel tank 70L, the platform can reach 800-1000km. Each wing can carry 22kg task payload (total 44kg)

Standard Kit Price

Includes: Complete airframe, VTOL arm sets, fuel tank, landing gears.

Features:

• 1.Power Redundancy for VTOL power propulsion system
• 2.Switchable Task load cabins for different operations
• 3.Aviation Aerodynamic Design, high efficiency, Lift Drag Ratio: 14.2

Technical Data:

Wingspan: 8.00 Meter

Whole Aircraft height:1.78 Meter

Length: 3.93 Meter

MTOW 170kg

Max altitude: 4500-7000m (up to the engine selection, HF version can achieve long endurance)

Cruise speed: 100KM/H

Payload weight with fuel: 75kg

Fuel Consumption by 2 x DLE170cc: 7.5L/h

Endurance Approved: 6H/30kg task load

Protection level: IPX4 (Wind Resistance: Level 5/Taking-off, Level/6/Cruising)

Engine Options:

2 X DLE170cc EFI

2 X DLE170ME EFI (Starter/Generator)

2 X DLA180cc EFI one key starter/Generator

2 X QRS183cc EFI One Key Starter/Generator (Recommended, TBO: 300H, Sensors Protocol for Ardupilot)

2 X QRS183cc Heavy Fuel Engine One Key Starter/Generator (Recommended, TBO:300H)

2 X LID170cc B2G EFI one key starter/Generator (Recommended, TBO:300H, Sensors Protocol for Ardupilot)

2 X LID170cc B2H Heavy Fuel Engine one key starter/Generator

2 X DA215cc EFI Engine

2 X Limbach 220cc EFI or HFE

2 X DLE222 EFI engine (Less weight) Teamaustars help to integrate protocols into Tunestudio with data display

----------------------------------------------------------------------------------------------------------------------

e-Power System Package (ePSP) recommended (Extra charge)

Customized e-Motors for VTOL x 8

Customized ESC for VTOL x 8

Industrial HD MG servos x 8

42" VTOL CF Propeller x 4 (Pair) + 1 x Pair spare (total 5 x Pairs) or Best Matched Size

Build kit x 1

Navigation lights x 1 set

Airspeed sensor system with pitot (rainproof & deicing) DroneCAN Protocol x 1

UAV Lipo Batteries for VTOL power 10000mah/6S x 16 (or 7S equivalent up to ESC/Motor voltage)

UAV Lipo Battery Professional Charger x 2

Avionics wirings, connectors, DC power modules x 1 set

RC Controller Futaba 16CH or SIYI MK15 for manual takeoff /landing x 1

Optional Datalink from 15-200km

Optional Professional/Military Ground Control Station (for PNP version, Teamaustars will help to integrate all together and test, which is included in Build service and Tuning & Flight test)

Optional Industrial POD/MIL POD/SAR

To help the end user team to save the time and costs, Team Austars provide "Build service" and "Tuning & Flight Test" with optional propulsion flight system (including well known flight controller , RTK positioning)

Optional Propulsion Flight System/(PFS) including: (Extra Charge)

Option A PFS package:

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• DLE170cc with Generator Version x 2 (low cost, more fuel cost and NOT the best)
• Pull/Pusher engine propeller Carbon Fiber x 1+1 (2 x for spare, total 4 x CF props)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1 SET
• Aviation Transport Box x 1 Set

Option B PFS package:

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• DLE170cc EFI with with Generator Version x 2
• Pull/Pusher engine propeller Carbon Fiber x 1+1 (2 x for spare, total 4 x CF props)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1 SET
• Aviation Transport Box x 1 Set

Option C PFS package:

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• DLE170ME EFI with Starter Generator Version x 2
• Pull/Pusher engine propeller Carbon Fiber x 1+1 (2 x for spare, total 4 x CF props)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1 SET
• Aviation Transport Box x 1 Set

Option D PFS package:

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• DLA180cc EFI with One Key Starter/Generator Version x 2
• Pull/Pusher engine propeller Carbon Fiber x 1+1 (2 x for spare, total 4 x CF props)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1 SET
• Aviation Transport Box x 1 Set

Option E PFS package: (Recommended with protocols for Ardupilot)

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• QRS183cc EFI with One Key Starter/ Generator Version x 2 (TBO:300H) Recommended
• Pull/Pusher engine propeller Carbon Fiber x 1+1 (2 x for spare, total 4 x CF props)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1
• Aviation Transport Box x 1 Set

Option F PFS package:

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• QRS183cc Heavy Fuel Engine with One Key Starter/ Generator Version x 2 (TBO:300H)
• Pull/Pusher engine propeller Carbon Fiber x 1+1 (2 x for spare, total 4 x CF props)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1 SET
• Aviation Transport Box x 1 Set

Option G PFS package:

CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1

• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• LID170cc B2G EFI with One Key Starter/ Generator Version x 2 (TBO:300H)
• Engine Cooling & Mounting System x 2
• Pull/Pusher engine propeller Carbon Fiber x 1+1 (2 x for spare, total 4 x CF props)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1 SET
• Aviation Transport Box x 1 Set

Option H PFS package: (The luxury/Best option with Heavy Fuel Engine, Protocol for Ardupilot)

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• LID170cc B2H Heavy Fuel Engine with One Key Starter/ Generator Version x 2 (TBO:300H)
• Engine Cooling & Mounting System x 2
• Pull/Pusher engine propeller Carbon Fiber x 1+1 (2 x for spare, total 4 x CF props)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1 SET
• Aviation Transport Box x 1 Set

• Option I PFS package:
• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• DA215cc EFI Engine w/Alternator 24V/100W version
• Pull/Pusher engine propeller Carbon Fiber x 1+1 (2 x for spare, total 4 x CF props)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1 SET
• Aviation Transport Box x 1 Set

• Option J PFS package: (high power, low cost version)
• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• DLA232 EFI one key starter/generator version (total 8.7kg weight) Recommended
• Pull/Pusher engine propeller Carbon Fiber x 1+1 (2 x for spare, total 4 x CF props)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1 SET
• Aviation Transport Box x 1 Set

Option K PFS package:

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• DLE222cc EFI Engine w/Alternator 24V/100W version
• Pull/Pusher engine propeller Carbon Fiber x 1+1 (2 x for spare, total 4 x CF props)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1 SET
• Aviation Transport Box x 1 Set

Star-X series UAV with optimized design in 2023 were all integrated by TeamAustars with multiple task payloads and engines options for industrial & government customer markets. Star-X UAVs feature long endurance and optimized efficiency. The whole product lines include full composite and carbon fibre/CF two versions. CF version is upgraded by carbon fibre material in key structure surfaces.

Star-X VTOL-7900HP UAV was released in early 2023 and designed for cargo transport, emergency rescue etc with its approved efficiency. With 100kg payload weight with fuel included. 6H/60kg task payload approved. The system had been deployed widely in maritime reconnaissance & border control with its multiple PODs integrated. The aero platform is powered by Limbach 550 EFI engine with one key starter/generator. Teamaustars will assist all the customers to integrate their FC system, industrial PODs, long distance Datalink and GCS system All in One Solution. Contact Teamaustars for customised system integration

Technical Data:

Wingspan: 7.90 Meter

Length: 4.80 Meter

MTOW 300kg

Max altitude: 4500-7000m (up to the engine selection, HF version can achieve long endurance)

Cruise speed: 137KM/H

Max speed: 162KM/H

Payload weight with fuel: 100kg

Endurance Approved: 6H/60kg task load

Limbach E550, Limbach EF550 One Key Starter/Generator New version, NGH 550 EFI engine

----------------------------------------------------------------------------------------------------------------------

Complete RTF system includes:

• Complete Airframe, all functonal surfaces, landing gears, and fuel tank
• MIL Class Flight controller with RTK GPS & DGPS (for Maritime on board)
• e-Power System Package (ePSP)
• Customized e-Motors for VTOL x 8
• Customized ESC for VTOL x 8
• Industrial HD MG servos x 8
• VTOL CF Propeller x 4 (Pair) + 1 x Pair spare (total 5 x Pairs) or Best Matched Size
• Build kit x 1
• Navigation lights x 1 set
• Airspeed sensor system with pitot (rainproof & deicing) DroneCAN Protocol x 1
• UAV Lipo Batteries for VTOL power x 1 set
• UAV Lipo Battery Professional Charger x 2
• Avionics wirings, connectors, DC power modules x 1 set

• RC Controller Futaba 16CH or SIYI MK15 for manual takeoff /landing x 1
• Limbach 550cc EFI one Key starter/alternator x 1
• Pusher engine propeller Carbon Fiber x 1+1 (2 x for spare)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1 SET
• Aviation Transport Box x 1 Set
• Optional Datalink from 15-200km
• Optional Professional/Military Ground Control Station (for PNP version, Teamaustars will help to integrate all together and test, which is included in Build service and Tuning & Flight test)
• Optional Industrial POD/MIL POD/SAR
• To help the end user team to save the time and costs, Team Austars provide "Build service" and "Tuning & Flight Test" with optional propulsion flight system (including well known flight controller , RTK positioning)
• Optional Propulsion Flight System/(PFS) including: (Extra Charge)

Star-X series UAV with optimized design in 2023 were all integrated by TeamAustars with multiple task payloads and engines options for industrial & government customer markets. Star-X UAVs feature long endurance and optimized efficiency. The whole product lines include full composite and carbon fibre/CF two versions. CF version is upgraded by carbon fibre material in key structure surfaces.

Star-X VTOL-7000 composite drone was released in early 2024 and designed for cargo transport, border reconnaissance with its large fuel tank and payload. With full fuel tank of 40 liters and 80kg payload weight. Max endurance can reach 600km range by EFI engine, 700-800km by heavy fuel engine up to 8 hours endurance

Standard Kit Price

Complete UAV airframe
Front cockpit cover
Rear cockpit cover
VTOL arm sets
Fuel tank
Navigation lights with controllable switch
Front & Rear landing gears

Wingspan: 7.00 Meter

Length: 3 Meter

MTOW 180kg

Height to the ground: 70.4cm

Max altitude: 4500-7000m (up to the engine selection, HF version can achieve long endurance)

Cruise speed: 120KM/H

Fuel tank: 40 liters included

Max Payload: 80kg

Engine: 250cc-340cc UAV engine, recommended Limbach 275 EFI, Limbach 288cc EFI or HFE, LID B2H-290 EFI, or LID B2H-290D HFE, QRS 312cc EFI, or QRS 312cc Heavy fuel with one key starter/generator

e-Power System Package (ePSP) recommended (Extra charge)

Customized e-Motors for VTOL x 8

Customized ESC for VTOL x 8

Industrial HD MG servos x 8

42" VTOL CF Propeller x 4 (Pair) + 1 x Pair spare (total 5 x Pairs)

Pusher engine propeller x 1

Build kit x 1

Navigation lights x 1 set

Airspeed sensor system with pitot (rainproof & deicing) DroneCAN Protocol x 1

UAV Lipo Batteries for VTOL power 10000mah/6S x 16

UAV Lipo Battery Professional Charger x 2

Avionics wirings, connectors, DC power modules x 1 set

RC Controller Futaba 16CH or SIYI MK15 for manual takeoff /landing x 1

Optional Datalink from 15-200km

Optional Professional/Military Ground Control Station (for PNP version, Teamaustars will help to integrate all together and test, which is included in Build service and Tuning & Flight test)

To help the end user team to save the time and costs, Team Austars provide "Build service" and "Tuning & Flight Test" with optional propulsion flight system (including well known flight controller , RTK positioning)

Optional Propulsion Flight System/(PFS) including:

Option A PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

Limbach 275cc 18KW EFI One key starter/generator 28V/1000W new BLS version x 1

Pusher engine propeller x 1

Muffler stacks x 2

Coupling kit for generator x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1 (16000-20000mAh)

Aviation Transport Box x 1 Set

Option B PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

Limbach 288cc 20KW EFI One key starter/generator 28V/1000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1 (16000-20000mAh)

Aviation Transport Box x 1 Set

Option C PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

Limbach 288cc 20KW Heavy Fuel/HF engine One key starter/generator 28V/1000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1 (16000-20000mAh)

Aviation Transport Box x 1 Set

Option D PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

LID 290cc B2G 18.5KW EFI One key starter/generator 24V/400W x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1 (16000-20000mAh)

Aviation Transport Box x 1 Set

Option E PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

LID 290cc B2H 18.5KW Heavy Fuel/HF Version One key starter/generator 24V/400W x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1 (16000-20000mAh)

Aviation Transport Box x 1 Set

Option F PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

QRS 312cc B2G EFI Version engine One key starter/generator 24/2000W x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option G PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

QRS 312cc B2H Heavy Fuel Version engine One key starter/generator 24/2000W x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Star-X series UAV with optimized design in 2023 were all integrated by TeamAustars with multiple task payloads and engines options for industrial & government customer markets. Star-X UAVs feature long endurance and optimized efficiency. The whole product lines include full composite and carbon fibre/CF two versions. CF version is upgraded by carbon fibre material in key structure surfaces.

Star-X VTOL-6900HP UAV was released in early 2025 and designed for telecom relay, border reconnaissance powered by Limbach 550 EFI engine with one key starter

Price Reference for RTK version with ePower Pack A (Limbach 550EFI engine), 3 Lights AI Seeker, 200km Datalink (3in1) and Dual screen Professional GCS around $220K USD (For RTK version)

Standard Kit Price

Complete UAV airframe
Front cockpit cover
Rear cockpit cover
VTOL arm sets
Fuel tank
Navigation lights with controllable switch
Front & Rear landing gears

Wingspan: 6900 mm

Length: 3990 mm

MTOW 150kg

Max altitude: 4500-7000m (up to the engine selection, HF version can achieve long endurance)

Cruise speed: 120KM/H

Fuel tank: 40 liters included

Max Payload: 80kg

Engine: 290cc-550cc UAV engine, recommended Limbach 275 EFI, Limbach 288cc EFI or HFE, LID B2H-290 EFI, or LID B2H-290D HFE, QRS 312cc EFI, QRS 312cc Heavy fuel, LID B2H-390, Limbach 550 EFI with one key starter/generator

e-Power System Package (ePSP) recommended (Extra charge)

Customized e-Motors for VTOL x 8

Customized ESC for VTOL x 8

Industrial HD MG servos x 8

VTOL CF Propeller x 4 (Pair) + 1 x Pair spare (total 5 x Pairs)

Pusher engine propeller x 1

Build kit x 1

Navigation lights x 1 set

Airspeed sensor system with pitot (rainproof & deicing) DroneCAN Protocol x 1

UAV Lipo Batteries for VTOL power

UAV Lipo Battery Professional Charger x 2

Avionics wirings, connectors, DC power modules x 1 set

RC Controller Futaba 16CH or SIYI MK15 for manual takeoff /landing x 1

Optional Datalink from 15-200km

Optional Professional/Military Ground Control Station (for PNP version, Teamaustars will help to integrate all together and test, which is included in Build service and Tuning & Flight test)

To help the end user team to save the time and costs, Team Austars provide "Build service" and "Tuning & Flight Test" with optional propulsion flight system (including well known flight controller , RTK positioning)

Optional Propulsion Flight System/(PFS) including:

Option A PFS package:

CUAV X7+ Pro autopilot x 1 CUAV C-RTK 9Ps Positioning GNSS module x 2

Or Cube Orange + RTK Dual GPS

Limbach 550 EFI One key starter/generator 28V/1000W new BLS version x 1

Pusher engine propeller x 1

Muffler stacks x 2

Coupling kit for generator x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1 (16000-20000mAh)

Aviation Transport Box x 1 Set

Option B PFS package:

CUAV X7+ Pro autopilot x 1 CUAV C-RTK 9Ps Positioning GNSS module x 2

Or Cube Orange + RTK Dual GPS

LID B2G 390 EFI One key starter/generator 28V/1000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1 (16000-20000mAh)

Aviation Transport Box x 1 Set

Option C PFS package:

CUAV X7+ Pro autopilot x 1 CUAV C-RTK 9Ps Positioning GNSS module x 2

Or Cube Orange + RTK Dual GPS

Limbach 288cc 20KW Heavy Fuel/HF engine One key starter/generator 28V/1000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1 (16000-20000mAh)

Aviation Transport Box x 1 Set

Option D PFS package:

CUAV X7+ Pro autopilot x 1 CUAV C-RTK 9Ps Positioning GNSS module x 2

Or Cube Orange + RTK Dual GPS

LID 290cc B2G 18.5KW EFI One key starter/generator 24V/400W x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1 (16000-20000mAh)

Aviation Transport Box x 1 Set

Option E PFS package:

CUAV X7+ Pro autopilot x 1 CUAV C-RTK 9Ps Positioning GNSS module x 2

Or Cube Orange + RTK Dual GPS

LID 290cc B2H 18.5KW Heavy Fuel/HF Version One key starter/generator 24V/400W x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1 (16000-20000mAh)

Aviation Transport Box x 1 Set

Option F PFS package:

CUAV X7+ Pro autopilot x 1 CUAV C-RTK 9Ps Positioning GNSS module x 2

Or Cube Orange + RTK Dual GPS

QRS 312cc B2G EFI Version engine One key starter/generator 24/2000W x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option G PFS package:

CUAV X7+ Pro autopilot x 1 CUAV C-RTK 9Ps Positioning GNSS module x 2

Or Cube Orange + RTK Dual GPS

QRS 312cc B2H Heavy Fuel Version engine One key starter/generator 24/2000W x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

PRODUCTION LEADING TIME: 30 days for 10, system integration: 1-2 weeks

Star-X series UAV with optimized design in 2023 were all integrated by TeamAustars with multiple task payloads and engines options for industrial & government customer markets. Star-X UAVs feature long endurance and optimized efficiency. The whole product lines include full composite and carbon fibre/CF two versions. CF version is upgraded by carbon fibre material in key structure surfaces.

Star-X VTOL-6670HP Pro can achieve long range around 900-1200km with EFI or HF Engines & 55L fuel tank for Telecom relay, cargo transport, emergency rescure, coastal reconnaissance. Total payload 70kg (55liter fuel+15kg task payload)

Product features:

• 1.Excellent design with maximized payload.
• 2.Quick release mechanism and Modular design for fast deployment by PNP less 10 mins
• 3.Switchable multi-functional task payloads for SATCOM, SAR, Airborne PDT, POD, and Telecom Relay
• 4.Large internal space for loading fuel and task payload

Technical Data:

Wingspan: 6670m

Length: 3850mm

Height: 1260mm

Max take-off weight:200kg

Max. Payload Weight:70kg (fuel+payload)

Cruise Speed:110-150km/h

Max. Cruise Flight Speed:150km/h

Economy Cruise Speed: 90km/h

Control radius:150-1000km(Customizable up to transceiver and SATCOM)

Max. Altitude AMSL:3500-7000m (up to the engine option)

Max. Wind Resistance:18m/s

Operating temperature:-10~45 degree

Fuel Tank Capacity: 55L

Flight Time:4h with 50kg payload (speed 120km/Hour)

Flight Distance:900km-1200km

Standard Kit package:

Complete UAV airframe
Front cockpit cover
Rear cockpit cover
VTOL arm sets
Fuel tank
Navigation lights with controllable switch
Front & Rear landing gears
Transport Box: 232 x 132 x 110cm

Optional Engine: 250cc-340cc UAV engine, recommended Limbach 275 EFI, Limbach 288cc EFI or HFE, LID B2H-290 EFI, LID B2H-290D HFE, QRS 312cc B2G EFI or B2H Heavy Fuel engine

e-Power System Package (ePSP) recommended (Extra charge)

Customized e-Motors for VTOL x 8

Customized ESC for VTOL x 8

Industrial HD MG servos x 8

VTOL CF Propeller x 4 (Pair) + 1 x Pair spare (total 5 x Pairs)

Pusher engine propeller x 1

UAV Battery charger x 1

Build kit x 1

Airspeed sensor system with pitot (rainproof & deicing) DroneCAN Protocol x 1

UAV Lipo Batteries for VTOL power 8050mah/24S x 8 or equivalent battery configuration pack

Avionics wirings, connectors, DC power modules x 1 set

RC Controller Futaba 16CH or equivalent Radio SIYI MK15 for manual takeoff /landing x 1

Optional Datalink from 15-200km

Optional Professional/Military Ground Control Station (for PNP version, Teamaustars will help to integrate all together and test, which is included in Build service and Tuning & Flight test)

Optional industrial camera or Military POD

To help the end user team to save the time and costs, Team Austars provide "Build service" and "Tuning & Flight Test" with optional propulsion flight system (including well known flight controller , RTK positioning)

Optional Propulsion Flight System/(PFS) including:

Option A PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

Limbach 275cc 18KW EFI One key starter/generator 28V/1000W new BLS version x 1

Pusher engine propeller x 1

Muffler stacks x 2

Coupling kit for generator x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option B PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

Limbach 288cc 20KW EFI One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option C PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

Limbach 288cc 20KW Heavy Fuel/HF engine One key starter/generator 28V/1000W or 3000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option D PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

LID 290cc B2G 18.5KW EFI One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option E PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

LID 290cc B2H 18.5KW Heavy Fuel/HF Version One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option F PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

QRS 312cc B2G EFI Version engine One key starter/generator 24/2000W x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option G PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

QRS 312cc B2H Heavy Fuel Version engine One key starter/generator 24/2000W x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

• Optional SATCOM Receiver to link SATlink (appointed SAT) Asia-Pacific region all covered with SATlink APSTAR 6D.
• For the order over 10 x quantity, Teamaustars will assist and customise the SATCOM transceiver to suit the local Satellites and complete system engineering.

PRODUCTION LEADING TIME: 30 days for 10, system integration: 1-2 weeks

Star-X series UAV with optimized design in 2023 were all integrated by TeamAustars with multiple task payloads and engines options for industrial & government customer markets. Star-X UAVs feature long endurance and optimized efficiency. The whole product lines include full composite and carbon fibre/CF two versions. CF version is upgraded by carbon fibre material in key structure surfaces.

Star-X VTOL-6520HP can achieve long range around 900-1100km with EFI or HF Engines & 50L fuel tank for Telecom relay, cargo transport, emergency rescure, coastal reconnaissance.

Product features:

• 1.Excellent design with maximized payload.
• 2.Quick release mechanism and Modular design for fast deployment by PNP less 10 mins
• 3.Switchable multi-functional task payloads for SATCOM, SAR, Airborne PDT, POD, and Telecom Relay
• 4.Large internal space for loading fuel and task payload

Technical Data:

Wingspan: 6520m

Length: 3620mm

Height: 1360mm

Dry Weight: 90kg

Max take-off weight:160kg

Max. Payload Weight:60kg (fuel+payload)

Cruise Speed:110-150km/h

Max. Cruise Flight Speed:160km/h

Economy Cruise Speed: 110km/h

Control Radius:150-500km(Customizable up to transceiver and SATCOM)

Max. Altitude AMSL:3500-7000m (up to the engine option)

Max. Wind Resistance:13m/s

Operating temperature:-10~45 degree

Fuel Tank Capacity: 50-55L

Flight Time:16h with 15kg payload, 6h with 40kg payload, 2h wth 50kg (tests approved)

Flight Distance:900km-1100km (A to B)

Standard Kit package:

Complete UAV airframe
Front cockpit cover
Rear cockpit cover
VTOL arm sets
Fuel tank
Navigation lights with controllable switch
Front & Rear landing gears
Transport Box: 232 x 122 x 110cm

Optional Engine: 250cc-340cc UAV engine, recommended Limbach 275 EFI, Limbach 288cc EFI or HFE, LID B2H-290 EFI, LID B2H-290D HFE, QRS 312cc B2G EFI or B2H Heavy Fuel engine

e-Power System Package (ePSP) recommended (Extra charge)

Customized e-Motors for VTOL x 4

Customized ESC for VTOL x 4

Industrial HD MG servos x 8

VTOL CF Propeller x 2 (Pair) + 1 x Pair spare (total 3 x Pairs)

Pusher engine propeller x 1

UAV Battery charger x 1

Build kit x 1

Airspeed sensor system with pitot (rainproof & deicing) DroneCAN Protocol x 1

UAV Lipo Bat

PRODUCTION LEADING TIME: 30 days for 10, system integration: 1-2 weeks

Star-X series UAV with optimized design in 2023 were all integrated by TeamAustars with multiple task payloads and engines options for industrial & government customer markets. Star-X UAVs feature long endurance and optimized efficiency. The whole product lines include full composite and carbon fibre/CF two versions. CF version is upgraded by carbon fibre material in key structure surfaces.

Star-X VTOL-6500HP Pro can achieve long range around 900-1000km with EFI or HF Engines & 48L fuel tank for coastal reconnaissance. The wing of the aircraft has 4 x reinforced hardpoints to hook up task payload

Wingspan: 6500mm

Length: 3264mm

Height: 1170mm

Max take-off weight:160kg

Max. Payload Weight:40kg or 78kg/40liter fuel+33kg task payload

Cruise Speed:90km/h

Max. Cruise Flight Speed:150km/h

Economy Cruise Speed: 90km/h

Control radius:150-1000km(Customizable up to transceiver and SATCOM)

Max. climb speed:4m/s

Max. Descend speed:5m/s

Max. Altitude AMSL:3500-7000m (up to the engine option)

Max. Wind Resistance:13.9-17.1m/s (50-60km/h)

Operating temperature:-10~60 degree

Fuel Tank Capacity: 40L-48L

Flight Time:10h with Standard POD

Performance: 8h/25kg, 6h/40kg payload, Max 33kg payload/40L-48L fuel

Flight Distance:900km-1000km

Battery compartment size: 220 x 380 x 200mm

Task payload compartment size: 670 x 350 x 300mm

FC compartment size: 220 x 380 x 80mm

Product key features:

• 1.Excellent rain-proof design to meet up worst weather conditions.
• 2.Hybrid power with Carburettor, EFI, Heavy fuel option to reach long endurance 12Hours.
• 3.Modular design for fast deployment by PNP less 10 mins
• 4.Switchable multi-functional task payloads for SATCOM, SAR, Airborne PDT, POD, and Telecom Relay
• 5.Reinforced 4 x hardpoints 15kg/each hardpoint for laser guided fire rescue bomb or cargo transport.

Standard Kit package:

Complete UAV airframe

• Front cockpit cover
• Rear cockpit cover
• VTOL arm sets
• Fuel tank
• Navigation lights with controllable switch
• Front & Rear landing gears
• Transport Box: 232 x 142 x 110cm

Optional Engine: 250cc-340cc UAV engine, recommended Limbach 275 EFI, Limbach 288cc EFI or HFE, LID B2H-290 EFI, LID B2H-290D HFE, QRS 312cc B2G EFI or B2H Heavy Fuel engine

e-Power System Package (ePSP) recommended (Extra charge)

Customized e-Motors for VTOL x 4

Customized ESC for VTOL x 4

Industrial HD MG servos x 8

VTOL CF Propeller x 2 (Pair) + 1 x Pair spare (total 3 x Pairs)

Pusher engine propeller x 1

UAV Battery charger x 1

Build kit x 1

Airspeed sensor system with pitot (rainproof & deicing) DroneCAN Protocol x 1

UAV Lipo Batteries for VTOL power 16000mah/12S x 4 or equivalent battery configuration pack

Avionics wirings, connectors, DC power modules x 1 set

RC Controller Futaba 16CH or equivalent Radio SIYI MK15 for manual takeoff /landing x 1

Optional Datalink from 15-200km

Optional Professional/Military Ground Control Station (for PNP version, Teamaustars will help to integrate all together and test, which is included in Build service and Tuning & Flight test)

To help the end user team to save the time and costs, Team Austars provide "Build service" and "Tuning & Flight Test" with optional propulsion flight system (including well known flight controller , RTK positioning)

Optional Propulsion Flight System/(PFS) including:

Option A PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

Limbach 275cc 18KW EFI One key starter/generator 28V/1000W new BLS version x 1

Pusher engine propeller x 1

Muffler stacks x 2

Coupling kit for generator x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option B PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

Limbach 288cc 20KW EFI One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option C PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

Limbach 288cc 20KW Heavy Fuel/HF engine One key starter/generator 28V/1000W or 3000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option D PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

LID 290cc B2G 18.5KW EFI One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option E PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

LID 290cc B2H 18.5KW Heavy Fuel/HF Version One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option F PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

QRS 312cc B2G EFI Version engine One key starter/generator 24/2000W x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option G PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

QRS 312cc B2H Heavy Fuel Version engine One key starter/generator 24/2000W x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Star-X series UAV with optimized design in 2023 were all integrated by TeamAustars with multiple task payloads and engines options for industrial & government customer markets. Star-X UAVs feature long endurance and optimized efficiency. The whole product lines include full composite and carbon fibre/CF two versions. CF version is upgraded by carbon fibre material in key structure surfaces.

System package includes:

Standard Kit package:

• Complete UAV airframe
• Front cockpit cover
• Rear cockpit cover
• VTOL arm sets
• Fuel tank
• Navigation lights with controllable switch
• Front & Rear landing gears
• Transport Box: 225 x 140 x 110cm

Optional Engine: 250cc-320cc UAV engine, recommended Limbach 275 EFI, Limbach 288cc EFI or HFE, LID B2H-290 EFI, LID B2H-290D HFE, QRS 312cc B2G EFI or B2H Heavy Fuel engine

e-Power System Package (ePSP) recommended (Extra charge)

Customized e-Motors for VTOL x 4

Customized ESC for VTOL x 4

Industrial HD MG servos x 9

VTOL CF Propeller x 2 (Pair) + 1 x Pair spare (total 3 x Pairs)

Pusher engine propeller x 1

UAV Battery charger x 1

Build kit x 1

Airspeed sensor system with pitot (rainproof & deicing) DroneCAN Protocol x 1

UAV Lipo Batteries for VTOL power 16000mah/12S x 4 or equivalent battery configuration pack

Avionics wirings, connectors, DC power modules x 1 set

RC Controller Futaba 16CH or equivalent Radio SIYI MK15 for manual takeoff /landing x 1

Optional Datalink from 15-200km

Optional Professional/Military Ground Control Station (for PNP version, Teamaustars will help to integrate all together and test, which is included in Build service and Tuning & Flight test)

To help the end user team to save the time and costs, Team Austars provide "Build service" and "Tuning & Flight Test" with optional propulsion flight system (including well known flight controller , RTK positioning)

Optional Propulsion Flight System/(PFS) including:

Option A PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

Limbach 275cc 18KW EFI One key starter/generator 28V/1000W new BLS version x 1

Pusher engine propeller x 1

Muffler stacks x 2

Coupling kit for generator x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option B PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

Limbach 288cc 20KW EFI One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option C PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

Limbach 288cc 20KW Heavy Fuel/HF engine One key starter/generator 28V/1000W or 3000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option D PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

LID 290cc B2G 18.5KW EFI One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option E PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

LID 290cc B2H 18.5KW Heavy Fuel/HF Version One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option F PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

QRS 312cc B2G EFI Version engine One key starter/generator 24/2000W x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option G PFS package:

CUAV X7+ Pro autopilot x 1

CUAV C-RTK 9Ps Positioning GNSS module x 2

QRS 312cc B2H Heavy Fuel Version engine One key starter/generator 24/2000W x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

PRODUCTION LEADING TIME: 30 days for 10, system integration: 1-2 weeks

Star-X series UAV with optimized design in 2023 were all integrated by TeamAustars with multiple task payloads and engines options for industrial & government customer markets. Star-X UAVs feature long endurance and optimized efficiency. The whole product lines include full composite and carbon fibre/CF two versions. CF version is upgraded by carbon fibre material in key structure surfaces.

Star-X VTOL-6000HP universal version is designed for industrial market with switchable task payload and 40liters fuel tank. The system can achieve long range around 900-1100km with EFI or HF Engines for Telecom relay, cargo transport, emergency rescure, coastal reconnaissance.

Product features:

• 1.Excellent design with maximized payload.
• 2.Quick release mechanism and Modular design for fast deployment by PNP less 10 mins
• 3.Switchable multi-functional task payloads for SATCOM, SAR, Airborne PDT, POD, and Telecom Relay
• 4.Large internal space for loading fuel and task payload

Technical Data:

Wingspan: 6000m

Length: 3080mm

Height: 1050mm

Max take-off weight:135kg

Max effective task Payload Weight:40kg (w/o fuel)

Cruise Speed:110-150km/h

Max. Cruise Flight Speed:160km/h

Economy Cruise Speed: 110km/h

Control Radius:50-200km(Customizable up to payload weight, fuel tank, transceiver and SATCOM)

Max. Altitude AMSL:3500-7000m (up to the engine option)

Max. Wind Resistance:12m/s

Operating temperature:-10~45 degree

Fuel Tank Capacity: 40L

Flight Time:5h with 30kg payload (tests approved)

Flight Distance:600km-1100km (A to B)

Standard Kit package:

Complete UAV airframe
Front cockpit cover
Rear cockpit cover
VTOL arm sets
Fuel tank
Navigation lights with controllable switch
Front & Rear landing gears
Transport Box: 232 x 122 x 110cm

Optional Engine: 215cc-320cc UAV engine, recommended Limbach 275 EFI, Limbach 288cc EFI or HFE, LID B2H-290 EFI, LID B2H-290D HFE, QRS 312cc B2G EFI or B2H Heavy Fuel engine or DA215 EFI engine

e-Power System Package (ePSP) recommended (Extra charge)

Customized e-Motors 24s for VTOL x 4

Customized ESC for VTOL x 4

Industrial HD MG servos x 8

VTOL CF Propeller x 2 (Pair) + 1 x Pair spare (total 3 x Pairs)

Pusher engine propeller x 1

UAV Battery charger x 1

Build kit x 1

Airspeed sensor system with pitot (rainproof & deicing) DroneCAN Protocol x 1

UAV Lipo Batteries 24S for VTOL power pack or identical configuration battery pattern

Avionics wirings, connectors, DC power modules x 1 set

RC Controller Futaba 16CH or equivalent Radio SIYI MK15 for manual takeoff /landing x 1

Optional Datalink from 15-200km

Optional Professional/Military Ground Control Station (for PNP version, Teamaustars will help to integrate all together and test, which is included in Build service and Tuning & Flight test)

Optional industrial camera or Military POD

To help the end user team to save the time and costs, Team Austars provide "Build service" and "Tuning & Flight Test" with optional propulsion flight system (including well known flight controller , RTK positioning)

Optional Propulsion Flight System/(PFS) including:

Option A PFS package:

CUAV X7+ Pro autopilot x 1+ CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

Limbach 275cc 18KW EFI One key starter/generator 28V/1000W new BLS version x 1

Pusher engine propeller x 1

Muffler stacks x 2

Coupling kit for generator x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option B PFS package:

CUAV X7+ Pro autopilot x 1 + CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

Limbach 288cc 20KW EFI One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option C PFS package:

CUAV X7+ Pro autopilot x 1+CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

Limbach 288cc 20KW Heavy Fuel/HF engine One key starter/generator 28V/1000W or 3000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option D PFS package:

CUAV X7+ Pro autopilot x 1+CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

LID 290cc B2G 18.5KW EFI One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option E PFS package:

CUAV X7+ Pro autopilot x 1+CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

LID 290cc B2H 18.5KW Heavy Fuel/HF Version One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option F PFS package:

CUAV X7+ Pro autopilot x 1+CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

DLA232 EFI Version engine One key starter/generator x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option G PFS package:

CUAV X7+ Pro autopilot x 1+CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

DA215cc EFI Version engine One key starter/generator x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

PRODUCTION LEADING TIME: 30 days for 10, system integration: 1-2 weeks

Star-X series UAV with optimized design in 2023 were all integrated by TeamAustars with multiple task payloads and engines options for industrial & government customer markets. Star-X UAVs feature long endurance and optimized efficiency. The whole product lines include full composite and carbon fibre/CF two versions. CF version is upgraded by carbon fibre material in key structure surfaces.

Star-X VTOL-6000HP SATCOM version is designed for SATCOM relay with enlarged task compartment and 40liters fuel tank. The system can achieve long range around 900-1100km with EFI or HF Engines for Telecom relay, cargo transport, emergency rescure, coastal reconnaissance.

Product features:

• 1.Excellent design with maximized payload.
• 2.Quick release mechanism and Modular design for fast deployment by PNP less 10 mins
• 3.Switchable multi-functional task payloads for SATCOM, SAR, Airborne PDT, POD, and Telecom Relay
• 4.Large internal space for loading fuel and task payload

Technical Data:

Wingspan: 6000m

Length: 3000mm

Height: 1000mm

Max take-off weight:150kg

Max. Payload Weight:50kg (fuel+payload)

Cruise Speed:110-150km/h

Max. Cruise Flight Speed:160km/h

Economy Cruise Speed: 110km/h

Control Radius:50-200km(Customizable up to payload weight, fuel tank, transceiver and SATCOM)

Max. Altitude AMSL:3500-7000m (up to the engine option)

Max. Wind Resistance:12m/s

Operating temperature:-10~45 degree

Fuel Tank Capacity: 40L

Flight Time:5h with 30kg payload (tests approved)

Flight Distance:600km-1100km (A to B)

Standard Kit package:

Complete UAV airframe
Front cockpit cover
Rear cockpit cover
VTOL arm sets
Fuel tank
Navigation lights with controllable switch
Front & Rear landing gears
Transport Box: 232 x 122 x 110cm

Optional Engine: 215cc-320cc UAV engine, recommended Limbach 275 EFI, Limbach 288cc EFI or HFE, LID B2H-290 EFI, LID B2H-290D HFE, QRS 312cc B2G EFI or B2H Heavy Fuel engine or DA215 EFI engine

e-Power System Package (ePSP) recommended (Extra charge)

Customized e-Motors for VTOL x 4

Customized ESC for VTOL x 4

Industrial HD MG servos x 8

VTOL CF Propeller x 2 (Pair) + 1 x Pair spare (total 3 x Pairs)

Pusher engine propeller x 1

UAV Battery charger x 1

Build kit x 1

Airspeed sensor system with pitot (rainproof & deicing) DroneCAN Protocol x 1

UAV Lipo Batteries for VTOL power pack

Avionics wirings, connectors, DC power modules x 1 set

RC Controller Futaba 16CH or equivalent Radio SIYI MK15 for manual takeoff /landing x 1

Optional Datalink from 15-200km

Optional Professional/Military Ground Control Station (for PNP version, Teamaustars will help to integrate all together and test, which is included in Build service and Tuning & Flight test)

Optional industrial camera or SAR, Military POD

To help the end user team to save the time and costs, Team Austars provide "Build service" and "Tuning & Flight Test" with optional propulsion flight system (including well known flight controller , RTK positioning)

Optional Propulsion Flight System/(PFS) including:

Option A PFS package:

CUAV X7+ Pro autopilot x 1+ CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

Limbach 275cc 18KW EFI One key starter/generator 28V/1000W new BLS version x 1

Pusher engine propeller x 1

Muffler stacks x 2

Coupling kit for generator x 1

Pusher Propeller x 1+1 (for spare)

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option B PFS package:

CUAV X7+ Pro autopilot x 1 + CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

Limbach 288cc 20KW EFI One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Pusher Propeller x 1+1 (for spare)

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option C PFS package:

CUAV X7+ Pro autopilot x 1+CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

Limbach 288cc 20KW Heavy Fuel/HF engine One key starter/generator 28V/1000W or 3000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Pusher Propeller x 1+1 (for spare)

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option D PFS package:

CUAV X7+ Pro autopilot x 1+CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

LID 290cc B2G 18.5KW EFI One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Pusher Propeller x 1+1 (for spare)

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option E PFS package:

CUAV X7+ Pro autopilot x 1+CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

LID 290cc B2H 18.5KW Heavy Fuel/HF Version One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Pusher Propeller x 1+1 (for spare)

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option F PFS package:

CUAV X7+ Pro autopilot x 1+CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

DLA232 EFI Version engine One key starter/generator x 1

Steel Exhaust Pipes x 2

Pusher Propeller x 1+1 (spare)

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option G PFS package:

CUAV X7+ Pro autopilot x 1+CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

DA215cc EFI Version engine One key starter/generator x 1

Steel Exhaust Pipes x 2

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

PRODUCTION LEADING TIME: 30 das for 10, system integration: 1-2 weeks

Star-X series UAV with optimized design in 2023 were all integrated by TeamAustars with multiple task payloads and engines options for industrial & government customer markets. Star-X UAVs feature long endurance and optimized efficiency. The whole product lines include full composite and carbon fibre/CF two versions. CF version is upgraded by carbon fibre material in key structure surfaces.

Star-X VTOL-5300HP universal version is designed for industrial market with switchable task payload and 35liters fuel tank. The system can achieve long range around 500-900km with EFI or HF Engines for Telecom relay, cargo transport, emergency rescure, coastal reconnaissance.

Product features:

• 1.Excellent design with maximized payload.
• 2.Quick release mechanism and Modular design for fast deployment by PNP less 10 mins
• 3.Switchable multi-functional task payloads for SATCOM, SAR, Airborne PDT, POD, and Telecom Relay
• 4.Large internal space for loading fuel and task payload

Technical Data:

Wingspan: 5250m

Length: 3350mm

Height: 1169mm

Max take-off weight:135kg

Max effective task Payload Weight:40kg (w/o fuel)

Cruise Speed:70-100km/h

Max. Cruise Flight Speed:140km/h

Economy Cruise Speed: 90km/h

Control Radius:50-200km(Customizable up to payload weight, fuel tank, transceiver and SATCOM)

Max. Altitude AMSL:3500-7000m (up to the engine option)

Max. Wind Resistance:12m/s

Operating temperature:-10~45 degree

Fuel Tank Capacity: 35L

Flight Distance:600km-900km (A to B)

Standard Kit package:

Complete UAV airframe
Front cockpit cover
Rear cockpit cover
VTOL arm sets
Fuel tank (Soft version)
Navigation lights with controllable switch
Front & Rear landing gears
Transport Box: 212 x 110 x 100cm

Optional Engine: 215cc-290cc UAV engine, recommended Limbach 275 EFI, Limbach 288cc EFI or HFE, LID B2H-290 EFI, LID B2H-290D HFE, Limbach 220 EFI or DA215 EFI engine

e-Power System Package (ePSP) recommended (Extra charge)

Customized e-Motors 24s for VTOL x 4

Customized ESC for VTOL x 4

Industrial HD MG servos x 8

VTOL CF Propeller x 2 (Pair) + 1 x Pair spare (total 3 x Pairs)

Pusher engine propeller x 1

UAV Battery charger x 1

Build kit x 1

Airspeed sensor system with pitot (rainproof & deicing) DroneCAN Protocol x 1

UAV Lipo Batteries 24S for VTOL power pack or identical configuration battery pattern x 1 set

Avionics wirings, connectors, DC power modules x 1 set

RC Controller Futaba 16CH or equivalent Radio SIYI MK15 for manual takeoff /landing x 1

Optional Datalink from 15-200km

Optional Professional/Military Ground Control Station (for PNP version, Teamaustars will help to integrate all together and test, which is included in Build service and Tuning & Flight test)

Optional industrial camera or Military POD

To help the end user team to save the time and costs, Team Austars provide "Build service" and "Tuning & Flight Test" with optional propulsion flight system (including well known flight controller , RTK positioning)

Optional Propulsion Flight System/(PFS) including:

Option A PFS package:

CUAV X7+ Pro autopilot x 1+ CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

Limbach 275cc 18KW EFI One key starter/generator 28V/1000W new BLS version x 1

Pusher engine propeller x 1

Muffler stacks x 2

Coupling kit for generator x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 2 (22000mah/each)

Aviation Transport Box x 1 Set

Option B PFS package:

CUAV X7+ Pro autopilot x 1 + CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

Limbach 288cc 20KW EFI One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Option C PFS package:

CUAV X7+ Pro autopilot x 1+CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

Limbach 288cc 20KW Heavy Fuel/HF engine One key starter/generator 28V/1000W or 3000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 2

Aviation Transport Box x 1 Set

Option D PFS package:

CUAV X7+ Pro autopilot x 1+CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

LID 290cc B2G 18.5KW EFI One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 2

Aviation Transport Box x 1 Set

Option E PFS package:

CUAV X7+ Pro autopilot x 1+CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

LID 290cc B2H 18.5KW Heavy Fuel/HF Version One key starter/generator 28V/1000W or 2000W new BLS version x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 2

Aviation Transport Box x 1 Set

Option F PFS package:

CUAV X7+ Pro autopilot x 1+CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

DLA232 EFI Version engine One key starter/generator x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 2

Aviation Transport Box x 1 Set

Option G PFS package:

CUAV X7+ Pro autopilot x 1+CUAV C-RTK 9Ps Positioning GNSS module x 2

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

DA215cc EFI Version engine One key starter/generator x 1

Steel Exhaust Pipes x 2

Silencer system x 1

3S Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 2

Aviation Transport Box x 1 Set

Star-X series UAV with optimized design in 2023 were all integrated by TeamAustars with multiple task payloads and engines options for industrial & government customer markets. Star-X UAVs feature long endurance and optimized efficiency. The whole product lines include full composite and carbon fibre/CF two versions. CF version is upgraded by carbon fibre material in key structure surfaces.

Star-X VTOL-4800HP PRO-U Universal version can achieve long range around 900-1200km with EFI or HF Engines & 30L fuel tank for coastal reconnaissance. With optional reserve fuel tank, its performance can be upgraded to a new level with 200-300km range.

Technical Data:

Wingspan: 4800mm

Length: 2580mm

Height: 845mm

Max take-off weight:95kg

Max payload with fuel: 34kg

Max effective task Payload Weight:25-30kg

Tested task payloads: 4Hours/25kg, 8Hours/10kg

Cruise Speed:108-118 km/h

Max Flight Speed:162 km/h

Control radius:150-500km?Customizable up to transceiver and SATCOM?

Max. Altitude AMSL:3500-7000m (up to the engine option)

Max. Wind Resistance:12m/s

Operation environment: -10°C+45°C

Fuel Tank Capacity: 30L (can be upgraded to 35L with Reserve fuel tank)

Engine option: 150-210cc EFI engine. Recommend LID 170cc B2G EFI, or HFE, QRS 183cc B2G or HFE for long TBOH 300 with Protocols to link Ardupilot and display all the sensors data. Economy engine option can be DLE170cc/DLE170ME/DLA180cc. Teamaustars assist all the customers in 24/7 online support.

Product key features:

· Excellent compact design to maximize the efficiency MTOW up to 95kg.

· Hybrid power with Carburettor, EFI, Heavy fuel option to reach long endurance 10Hours.

· Modular design for fast deployment by PNP less 10 mins

· Optional reserve fuel tank for extra endurance.

Standard Kit package: $9300 USD

• Complete UAV airframe
• VTOL arm sets
• Fuel tank
• Navigation lights with controllable switch
• Airspeed pitot
• Front & Rear landing gears
• Transport Box: 195 x 92 x 71cm

e-Power System Package (ePSP) recommended (Extra charge)

• Customized e-Motors 24S for VTOL x 4
• Customized ESC for VTOL x 4
• Industrial HD MG servos x 4+N
• VTOL CF Propeller x 2 (Pair) + 1 x Pair spare (total 3 x Pairs)
• Build kit x 1
• Airspeed sensor system with pitot (Rain-proof and de-icing) DroneCAN Protocol x 1
• UAV Lipo Batteries for VTOL power 8500mah/12S x 4 or equivalent battery configuration pack
• UAV Battery Charger PC1500 x 1
• Avionics wirings, UBEC, connectors, DC power modules x 1 set
• RC Controller Futaba 16CH or equivalent Radio SIYI MK15 for manual takeoff /landing x 1

Optional Datalink from 15-200km

Optional Professional/Military Ground Control Station (for PNP version, Teamaustars will help to integrate all together and test, which is included in Build service and Tuning & Flight test)

Optional Industrial camera or POD, check Camera & PODs categories.

To help the end user team to save the time and costs, Team Austars provide "Build service" and "Tuning & Flight Test" with optional propulsion flight system (including well known flight controller , RTK positioning)

Optional Propulsion Flight System/(PFS) including:

Option A PFS package:

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• DLE170cc EFI with generator version x 1
• Pusher Propeller x 1 + 1 (Spare)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1
• Aviation Transport Box x 1 Set

Option B PFS package:

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• DLA180cc EFI with one key starter/generator version x 1
• Pusher Propeller x 1+1 (Spare)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1
• Aviation Transport Box x 1 Set

Option C PFS package: (Recommended) (recommended with protocols for Audupilot/Data)

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• QRS183cc B2G EFI with one key starter/generator version x 1
• Pusher Propeller x 1+1 (Spare)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1
• Aviation Transport Box x 1 Set

Option D PFS package: (Recommended) (Luxury for performance/best value)

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• QRS183cc B2H Heavy Fuel with one key starter/generator version
• Pusher Propeller x 1+1 (Spare)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1
• Aviation Transport Box x 1 Set

Option E PFS package: (Luxury for performance with protocols for ardupilot/data)

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• LID B2G 170cc EFI with one key starter/generator version
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1
• Aviation Transport Box x 1 Set

Option F PFS package:(Recommended) (For good value/performance)

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• DLE170ME Version EFI with Starter/Generator version
• Pusher engine propeller x 1+1 (for spare)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1
• Aviation Transport Box x 1 Set

Star-X series UAV with optimized design in 2023 were all integrated by TeamAustars with multiple task payloads and engines options for industrial & government customer markets. Star-X UAVs feature long endurance and optimized efficiency. The whole product lines include full composite and carbon fibre/CF two versions. CF version is upgraded by carbon fibre material in key structure surfaces.

Star-X VTOL-4800HP PRO-S was designed for SATCOM relay with large task payload compartment space to fit SATCOM transceiver. It can achieve long range around 1000km with EFI or HF Engines & 25L fuel tank its mission operation.

Technical Data:

Wingspan: 4800mm

Length: 2580mm

Height: 845mm

Max take-off weight:90kg

Max effective task Payload Weight:25-30kg

Tested task payloads: 6Hours/20kg, 2Hours/30kg

Cruise Speed:100-120 km/h

Max Flight Speed:150 km/h

Control radius:100-400km/Customizable up to transceiver and SATCOM

Max. Altitude AMSL:3500-7000m (up to the engine option)

Max. Wind Resistance:12m/s

Operation environment: -10+45

Fuel Tank Capacity: 25L

Engine option: 150-210cc EFI engine. Recommend LID 170cc B2G EFI, or HFE, QRS 183cc B2G or HFE for long TBOH 300 with Protocols to link Ardupilot and display all the sensors data. Economy engine option can be DLE170cc/DLE170ME/DLA180cc. Teamaustars assist all the customers in 24/7 online support.

Product key features:

• Excellent compact design to maximize the efficiency MTOW up to 90kg.
• Hybrid power with Carburettor, EFI, Heavy fuel option to reach long endurance 10Hours.
• Quick release & Modular design for fast deployment by PNP less 10 mins
• Enlarged front task payload compartment to fit SATCOM Transceiver or SAR

Standard Kit package:

• Complete UAV airframe
• VTOL arm sets
• Fuel tank
• Navigation lights with controllable switch
• Airspeed pitot
• Front & Rear landing gears
• Transport Box: 195 x 92 x 71cm

e-Power System Package (ePSP) recommended (Extra charge)

• Customized e-Motors 24S for VTOL x 4
• Customized ESC for VTOL x 4
• Industrial HD MG servos x 4+N
• VTOL CF Propeller x 2 (Pair) + 1 x Pair spare (total 3 x Pairs)
• Build kit x 1
• Airspeed sensor system with pitot (Rain-proof and de-icing) DroneCAN Protocol x 1
• UAV Lipo Batteries for VTOL power 8500mah/12S x 4 or equivalent battery configuration pack
• UAV Battery Charger PC1500 x 1
• Avionics wirings, UBEC, connectors, DC power modules x 1 set
• RC Controller Futaba 16CH or equivalent Radio SIYI MK15 for manual takeoff /landing x 1

Optional Datalink from 15-200km

Optional Professional/Military Ground Control Station (for PNP version, Teamaustars will help to integrate all together and test, which is included in Build service and Tuning & Flight test)

Optional Industrial camera or POD, check Camera & PODs categories.

To help the end user team to save the time and costs, Team Austars provide "Build service" and "Tuning & Flight Test" with optional propulsion flight system (including well known flight controller , RTK positioning)

Optional Propulsion Flight System/(PFS) including:

Option A PFS package:

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• DLE170cc EFI with generator version x 1
• Pusher Propeller x 1 + 1 (Spare)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1
• Aviation Transport Box x 1 Set

Option B PFS package:

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• DLA180cc EFI with one key starter/generator version x 1
• Pusher Propeller x 1+1 (Spare)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1
• Aviation Transport Box x 1 Set

Option C PFS package: (Recommended) (recommended with protocols for Audupilot/Data)

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• QRS183cc B2G EFI with one key starter/generator version x 1
• Pusher Propeller x 1+1 (Spare)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1
• Aviation Transport Box x 1 Set

Option D PFS package: (Recommended) (Luxury for performance/best value)

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• QRS183cc B2H Heavy Fuel with one key starter/generator version
• Pusher Propeller x 1+1 (Spare)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1
• Aviation Transport Box x 1 Set

Option E PFS package: (Luxury for performance with protocols for ardupilot/data)

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• LID B2G 170cc EFI with one key starter/generator version
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1
• Aviation Transport Box x 1 Set

Option F PFS package:(Recommended) (For good value/performance)

• CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• DLE170ME Version EFI with Starter/Generator version
• Pusher engine propeller x 1+1 (for spare)
• Lipo battery for engine starter x 1
• Lipo battery for internal avionics power x 1
• Aviation Transport Box x 1 Set
• 

Star-X series UAV with optimized design in 2023 were all integrated by TeamAustars with multiple task payloads and engines options for industrial & government customer markets. Star-X UAVs feature long endurance and optimized efficiency. The whole product lines include full composite and carbon fibre/CF two versions. CF version is upgraded by carbon fibre material in key structure surfaces.

Star-X VTOL-4800EP Ultimate MTOW 60kg with Max 20kg Payload represents the highest level of efficiency in same class VTOLs worldwide.

Oustanding features and advantages:

• a) Full electric version, excellent compact design to maximize the efficiency MTOW up to 60kg
• b) Aviation class wirings engineering with unique battery compartment
• c) Quick release mechanism and modular design by PNP less 10 mins
• d) Portable packing for fast deployment
• 
  
• Technical Data:
• Wingspan :4800mm
• Length :2500mm
• Aircraft material: aviation composite material + Carbon fiber(optional) for extreme performance in rigid environment
• MTOW :60KG
• Wind resistance: Level 6/ 12m/s
• Flying altitude :4000 meters
• Load :1-20 kg
• Endurance approved/tested: 1.5Hour/15kg task payload, can be upgraded to Austars Solid State battery/less weight to adjust endurance hours with battery applied
• Max speed : 130km/H
• Cruising speed :100-120km/H
• Communication distance :30-100 km (Up to datalink distance, task radius)
• Equipped with mission equipment: POD or industrial camera

Standard kit package includes:

Complete UAV airframe
Front cockpit cover
VTOL arm sets
Navigation lights
Front & Rear landing gears

e-Power System Package (ePSP) for PNP recommended (Extra charge)

• CUAV X7+ Pro autopilot x 1 + CUAV C-RTK 9Ps Positioning GNSS module x 2
• or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1
• Customized or TMOTOR e-Motors for VTOL x 4
• Customized or TMOTOR e-Motors for Pusher x 2
• Customized or TMOTOR ESC for VTOL x 4 +2
• Industrial HD MG servos x 4+N
• VTOL CF Propeller x 2 (Pair) + 1 x Pair spare (total 3 x Pairs)
• Pusher CF Propeller x 2
• Build kit x 1
• Navigation lights x 1 set
• Airspeed sensor system with pitot (rainproof & deicing) DroneCAN Protocol x 1
• UAV Battery Charger Professional x 1
• UAV Lipo Battery 14S/72000mah for VTOL power x 1 (set)
• Avionics wirings, connectors, UBEC, DC power modules x 1 set

Optional Datalink from 15-200km

Optional Professional/Military Ground Control Station (for PNP version, Teamaustars will help to integrate all together and test, which is included in Build service and Tuning & Flight test)

Optional Industrial Camera & POD, check our website

To help the end user team to save the time and costs, Team Austars provide "Build service" and "Tuning & Flight Test" with optional propulsion flight system (including well known flight controller , RTK positioning)

Star-X series UAV with optimized design in 2023 were all integrated by TeamAustars with multiple task payloads and engines options for industrial & government customer markets. Star-X UAVs feature long endurance and optimized efficiency. The whole product lines include full composite and carbon fibre/CF two versions. CF version is upgraded by carbon fibre material in key structure surfaces.

Star-X VTOL-4700 PRO SATCOM System was designed in 2025 for SATCOM Relay with super large compartment for all in one task payloads by its unique battery section configured. The fuel tank can be enlarged to 22L for EFI 120cc engine with 8 hours endurance.

Dimensions:

Wingspan: 4.70m Fuselage length: 2.35m

MTOW: 64kg

Maximum load: 18-23kg (task + fuel load)

Fuel tank volume: 16L, Max: 22L

Take-off and landing mode: VTOL

Endurance time: 6~8h

Power form: hybrid

Cruising speed: 90km/h

Wind resistance: Level 6 (12m/s)

Control radius: 50km/100km/broadband satellite communication optional

Positioning method: single point positioning + lidar height fixing/RTK centimeter optional

Orientation method: magnetic compass/dual GPS orientation optional

Packing size: 165cm*90cm*65cm

Features:

• 1.Aviation VTOL design with unique battery compartment
• 2.Fast Deployment with quick release mechanism PNP structure less 10 mins
• 3.Folded wings for easier transport and maritime applications
• 4.Aviation Class Avionics Engineering with system redundancy
• 5.Unlimited datalink communication by SATCOM
• 6.Long endurance in same class with large fuel tank up to 22L and EFI engine
• 7.Multiple task payloads integrated with POD, 4G/5G network, SAR (all in one)

Package includes: Contact us for Pricing

Standard Kit package:

Complete UAV airframe

VTOL arm sets

Fuel tank

Navigation lights with controllable switch

Airspeed pitot

Front & Rear landing gears

Transport Box:

e-Power System Package (ePSP) recommended (Extra charge)

Customized e-Motors for VTOL x 4

Customized ESC for VTOL x 4

Industrial HD MG servos x 4

Pusher Propeller for Pusher engine x 1

VTOL CF Propeller x 2 (Pair) + 1 x Pair spare (total 3 x Pairs)

Build kit x 1

Airspeed sensor system with pitot (Rain-proof and de-icing) DroneCAN Protocol x 1

UAV Lipo Batteries for VTOL power pack

UAV Battery Charger PC1500 x 1

Avionics wirings, UBEC, connectors, DC power modules x 1 set

RC Controller Futaba 16CH or equivalent Radio SIYI MK15 for manual takeoff /landing x 1

CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

LID B2H 120cc Heavy Fuel engine with one key starter/generator version

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Optional Datalink

Optional GCS

Optional POD

Optional SATCOM Receiver to link SATlink (appointed SAT) Asia-Pacific region all covered with SATlink APSTAR 6D.

For the order over 10 x quantity, Teamaustars will assist and customise the SATCOM transceiver to suit the local Satellites and complete system engineering.

?

?

Star-X series UAV with optimized design in 2023 were all integrated by TeamAustars with multiple task payloads and engines options for industrial & government customer markets. Star-X UAVs feature long endurance and optimized efficiency. The whole product lines include full composite and carbon fibre/CF two versions. CF version is upgraded by carbon fibre material in key structure surfaces.

Star-X VTOL-4600 SATCOM System was designed in 2023 for SATCOM Relay with super large ccompartment for all in one task payloads by its unique battery section configured. The fuel tank can be enlarged to 22L for EFI 120cc engine with 8 hours endurance.

Dimensions:

Wingspan: 4.60m Fuselage length: 2.23m

MTOW: 63kg

Maximum load: 18-23kg (task + fuel load)

Fuel tank volume: 16L, Max: 22L

Take-off and landing mode: VTOL

Endurance time: 6~8h

Power form: hybrid

Cruising speed: 90km/h

Wind resistance: Level 6 (12m/s)

Control radius: 50km/100km/broadband satellite communication optional

Positioning method: single point positioning + lidar height fixing/RTK centimeter optional

Orientation method: magnetic compass/dual GPS orientation optional

Packing size: 162cm*90cm*63cm

Features:

• 1.Aviation VTOL design with unique battery compartment
• 2.Fast Deployment with quick release mechanism PNP structure less 10 mins
• 3.Folded wings for easier transport and maritime applications
• 4.Aviation Class Avionics Engineering with system redundancy
• 5.Unlimited datalink communication by SATCOM
• 6.Long endurance in same class with large fuel tank up to 22L and EFI engine
• 7.Multiple task payloads integrated with POD, 4G/5G network, SAR (all in one)

Package includes: Contact us for Pricing

Standard Kit package:

Complete UAV airframe

VTOL arm sets

Fuel tank

Navigation lights with controllable switch

Airspeed pitot

Front & Rear landing gears

Transport Box:

e-Power System Package (ePSP) recommended (Extra charge)

Customized e-Motors for VTOL x 4

Customized ESC for VTOL x 4

Industrial HD MG servos x 4

Pusher Propeller for Pusher engine x 1

VTOL CF Propeller x 2 (Pair) + 1 x Pair spare (total 3 x Pairs)

Build kit x 1

Airspeed sensor system with pitot (Rain-proof and de-icing) DroneCAN Protocol x 1

UAV Lipo Batteries for VTOL power pack

UAV Battery Charger PC1500 x 1

Avionics wirings, UBEC, connectors, DC power modules x 1 set

RC Controller Futaba 16CH or equivalent Radio SIYI MK15 for manual takeoff /landing x 1

CUAV X7+ Pro autopilot + CUAV C-RTK 9Ps Positioning GNSS module x 1

or Cube Orange Set x 1 + Here 3 GNSS + ADS-B/RFD900 Telemetry x 1

LID B2H 120cc Heavy Fuel engine with one key starter/generator version

Lipo battery for engine starter x 1

Lipo battery for internal avionics power x 1

Aviation Transport Box x 1 Set

Optional Datalink

Optional GCS

Optional POD

Optional SATCOM Receiver to link SATlink (appointed SAT) Asia-Pacific region all covered with SATlink APSTAR 6D.

For the order over 10 x quantity, Teamaustars will assist and customise the SATCOM transceiver to suit the local Satellites and complete system engineering.

?

?