HW256 1× Thermal Fusion Sight - GST inc (Global Warehouse)

Technical specifications

Values are transcribed from the HW256 controlled user manual. Conditions are retained. This page is a product reference, not an independent test report or certification.

Optical

Power

Thermal imaging

Adjustment, mounting, physical and environmental

HW256 at a glance

The HW256 is a compact 1× thermal fusion sight that combines a red-dot aiming channel with an uncooled thermal imaging channel in one housing. The red dot gives rapid target acquisition and a precise aiming point; the thermal channel renders target outlines and scene detail in low light, darkness, smoke and dust. The sight therefore remains usable by day and by night without changing hardware.

A 1× optical system is used with both eyes open, so the HW256 can be brought onto a target in the same way as a conventional red-dot sight. Thermal imagery is presented on an OLED display and can be viewed together with the red-dot reticle for fusion observation. The detector resolves 256 × 192 pixels on a 12 µm pitch behind a 19 mm lens, giving a 9° × 6.7° field of view.

The housing is machined from aircraft-grade aluminium with a black hard-anodised finish. A standard Picatinny interface with a quick-release lever allows tool-free fitting and removal, and the 38 mm optical-axis height matches common rail and mount combinations. The supplied document describes intended use for close- to medium-range work on submachine guns, assault rifles and similar platforms, including urban operations and indoor CQB, subject to local law.

Key features

• Thermal and red dot in one sight for day and night use.
• Three reticle styles: dot, circle, and dot with circle.
• Three thermal image modes: black hot, white hot and outline.
• 256 × 192 uncooled vanadium-oxide detector, 12 µm pixel pitch, 19 mm lens, 9° × 6.7° field of view.
• OLED display, 1024 × 768 pixels.
• 1× / 3× / 5× digital zoom; digital zoom reduces the field of view.
• 15 daylight + 5 night-vision red-dot levels and 10 thermal brightness levels.
• Red-dot-only runtime ≥ 10,000 h; fusion-mode runtime ≥ 6 h.
• Full CNC aluminium housing with black hard-anodised finish for rigidity and stable zero retention.
• 30 × 23 mm viewing window and a quick-release Picatinny mount with a clamp-adjustment knob.
• IP67 sealed housing, stated for −20 °C to +65 °C operation.

How thermal fusion works

Every object above absolute zero emits infrared radiation, and the amount and spectrum depend on its temperature and emissivity. An uncooled thermal detector converts the incoming long-wave infrared radiance into an electrical signal and then into a visible image. Warmer objects can be displayed brighter (white hot) or darker (black hot), or rendered as an outline that emphasises temperature transitions.

The HW256 adds a red-dot aiming channel to that thermal image. The red dot provides a precise, high-contrast aiming point for rapid acquisition, while the thermal channel reveals target outlines that may be difficult to see with a conventional optic in low light, darkness, smoke or dust. Presenting both channels in one 1× sight avoids switching hardware between day and night configurations.

Thermal imagery is not a photograph and is not a calibrated temperature map. Image contrast depends on the temperature difference between the target and its background, atmospheric transmission, distance, focus and the selected palette. The HW256 is an imaging and aiming sight, not a radiometric thermometer.

Performance conditions and limits

• Thermal contrast depends on the target-to-background temperature difference and emissivity. A scene with little thermal contrast may show little detail even when the detector is working correctly.
• Atmospheric transmission is reduced by fog, heavy rain, dust, smoke and long distance. Thermal imaging can help in smoke or dust, but it does not guarantee seeing through every obscurant.
• Ordinary glass blocks much of the long-wave infrared band used by thermal imagers. A thermal sight generally cannot image through a closed window or glass barrier; confirm the optical path.
• Runtime depends on mode, brightness, zoom, calibration frequency, battery type and temperature. The quoted red-dot-only and fusion-mode figures are separate operating conditions.
• Digital zoom enlarges the central part of the image; it does not add optical resolution or target detail.
• IP67 is a manufacturer-stated rating. IEC 60529 defines the IP code; citing the standard does not certify this product. IP67 is not a diving or high-pressure-washing rating.
• Zero retention after removal, impact or mount changes must be confirmed on the host; the supplied manual describes the inspection and adjustment process.

Intended use and application scenarios

The supplied document describes the HW256 for close- to medium-range work on submachine guns, assault rifles and similar platforms, including urban operations and indoor CQB. It is an aiming aid: it does not replace safe firearm handling, marksmanship training or compliance with local law.

• Day/night patrol and security use where both a rapid red-dot aim point and thermal target detection are useful.
• Urban and indoor close-quarters scenarios where target outlines may be obscured by low light, shadow, smoke or dust.
• Hunting where lawful, particularly in low-light conditions where thermal contrast reveals animals against vegetation or ground.
• Sport shooting and professional training on 1913-rail rifles and carbines.
• Observation and detection of heat-emitting targets before positive identification with other sensors or lighting.

Application examples describe configuration possibilities, not a guarantee of detection, identification, hit probability or legality in a particular jurisdiction. Confirm local law and range rules before use.

Mounting, power and configuration

The HW256 fits a MIL-STD-1913 Picatinny rail with its quick-release mount. Confirm that the rail and mount are mechanically sound, that the mount is fully seated and locked, and that the sight cannot move by hand before use. The 38 mm optical-axis height should be checked against the host’s stock, cheek weld and any magnifier or clip-on.

Power is supplied by one CR123A cell (3 V or 3.7 V). The Type-C 5 V input can power the sight but does not charge the cell according to the manual. The red dot and thermal channel have separate power and brightness logic; the supplied manual gives the complete button, reticle, zoom, calibration and inspection procedure. This page intentionally does not reproduce operating instructions.

Thermal performance is configuration-dependent. Confirm the image focus, palette, brightness and reticle for the intended environment, and verify zero after mounting or changing the host configuration.

Care, storage and safety

• Wipe outer surfaces with a cloth moistened with water, mild soap solution or alcohol. Blow loose particles off the optics, then clean the glass with a lens tissue and an optical solvent.
• Clean the battery compartment with a suitable solvent and let it dry fully. Check the mount, O-rings and covers periodically.
• If the sight is not used for a long period, remove the cell, store it in a dry, dust-free place below 80 % relative humidity, away from acids, alkalis and corrosive vapours, and check the sight every three months.
• Do not open the housing, modify the sight or attempt repairs. Refer visible damage or unexplained faults to qualified service personnel.
• Before installing, adjusting or servicing the sight, make sure the firearm is unloaded, the chamber is empty and the muzzle is pointed in a safe direction. Wear eye and hearing protection when shooting.
• Do not point the sight at the Sun, lasers, welding equipment or other high-intensity heat sources. Do not use it as solar-viewing equipment.
• Do not dispose of lithium cells with household waste; follow local recycling and disposal rules.