The Q6400AC is a beast of a multi-charger and is one of our favorites to recommend to modellers!

What makes this charger so popular? Here are a few of our reasons:

• It packs 100 watts of power per port and does not require an external power supply like most of the chargers in this output range while still in a relatively compact size.
• Power Mode! Selectable power output from 3-24v and .1-10a to test electrical equipment.
• Menus are easy to navigate and offer a unique capacity setting that automatically changes the power to accommodate 1C charging (Higher than 1C can be chosen as well)
• Balance port pins are supported with a plastic housing which makes it much easier to insert the plug instead of bending. Also locks positively into place.
• No earmuffs required! The 2 internal fans are not annoying or out of balance at high rates of charge.
• Full, 1 Year Warranty

Additional Features:

1. Creates a safe charging condition and minimizes the danger caused by negligence and user setting errors.
2. High efficiency, up to 90%.
3. Accepts all types of R/C batteries: LiPO/LiFe/NiMH/NiCd/Pb.
4. Easy to operate.
5 .It can monitor and balance each cell of the pack individually ( tolerance ±0.01V).
6. Accepts individual battery charging/discharging. Various charging modes to meet different requirements.
7. Performs 1-6 cycles of charge>discharge or discharge>charge continually for NiMH/NiCd refreshing

Specifications:

• AC Input voltage: 110or220V
• DC Input voltage: 11-18.0V
• Charge power max: 100W*4
• Discharger power max: 10W*4
• Charge current range: 0.1-10.0A
• Discharge current range: 0.1-2.0A
• NiCd/NiMH battery cell count: 1 - 15cells
• LiPo/LiLo/LiFe battery cell count: 1 - 6series
• Pb battery voltage: 2 V - 20V
• Dimensions: 243*191*67mm
• Weight: 1750g