Specifications

ER10000 is part of the 1535 nm erbium-glass pulsed laser family. Its current PDF lists pulse energy ≥10 mJ and optical pulse width 12 ns. Repetition-rate status is shown separately in the table. These are the source's distinct specifications; none establishes the distance or accuracy of a finished instrument.

Parameter	Current PDF value
Model	ER10000
Laser Wavelength	1535nm
Laser classification — source entry	Class 1 (classification report and evaluated configuration require confirmation)
Pulse energy	≥10 mJ
Laser Pulse width	12 ns
Drive pulse width	≤ 4 ms
Pulse repetition rate	1~5 Hz
Pulse stability	5 %
Raw Beam Diameter	0.8 mm
Beam divergence angle	≤ 4mrad
Beam Mode	TEM00
Operating temperature	-40 ℃ ~ +65 ℃
Storage temperature	-55 ℃ ~+ 75℃
Dimension (mm)	110×40×24.5mm³ (Three linear dimensions in mm are listed; the source’s mm³ typography is not a calculated volume.)
Weight	220 g
Voltage	≤ 14 V
Electric current	100 A
Shock	1500 G, 0.5 ms
Vibration	20~2000 Hz/20 G
Lifetime	＞1million shots

Reading this model's optical specifications

The recorded raw beam diameter is 0.8 mm and divergence is ≤ 4mrad. The current specification table does not state the divergence's full-angle/half-angle convention or the beam-width measurement method. Those definitions remain unspecified until a beam report confirms them. The beam-mode entry does not, by itself, supply a measured M² value.

Values above were checked against the current model PDF, including its inequality signs and stated measurement qualifiers. Source entries of “Class 1” require the corresponding classification report; shock, vibration and lifetime entries likewise need their stated test conditions. Missing tolerances and statistics are not reconstructed from another model or a paper.