JetRuler is thrilled to introduce our latest creation, a scale model of one of aviation history's most legendary aircraft, the General Dynamics F-16 Fighting Falcon.

Our goal with this model was to exceed expectations, delivering a stunningly accurate replica that not only captures the beauty of the original but also offers unparalleled reliability and durability. Designed for regular use, this model is easy to transport and assemble, ensuring a seamless experience for enthusiasts.

This 1/8.5 scale version features an enhanced wing area, meticulously engineered to provide superior performance and exceptional flight characteristics. It's a model that not only looks incredible but flies brilliantly, setting a new standard in scale aviation.

Color scheme A and E in stock PNP version

SPECIFICATIONS:

Model: 1/8 .5 F16

Wingspan: 52.9″ (1,344mm)

Length: 71.3″ (1.81mm) – Plus pitot tube

Weight: 17.8lbs (7.85kg)

BASIC SETUP:

Control throws:

Aileron: 10mm up / 10mm down – 40% Expo

Measured from the wingtip

Rudder: 35mm left / 35mm right – 50% Expo

Elevator: 40mm up / 40mm down – 45% Expo

Measured from the front of the leading edge of the elevator.

The CG is 148mm from the front leading edge on the root of the wing (Factory Settings)

FEATURES:

Full composite construction, lightweight and strong
Painted outside the mold so no seam lines
Easily detachable ventral fins, helps in place with just two screws
INCLUDED HARDWARE:
Complete air frame (including fibreglass control horns)
Carbon fibre wing-tubes
Servo extension leads
Fixed Dual wall thrust pipe (for 60-100N turbines)
Fuel tank (2000ml)
Pre-prepared pushrods with ball links
Pre-glued control horns

OPTIONAL EXTRAS:

Scale cockpit

• Light system
• PNP and installation service
• REQUIRED HARDWARE:
• Turbine: 60-100N
• Servos: x9
• x5 middle size servo, 35 x 15 x 30mm (minimum 16kg) // Uses x1 per aileron, x1 per elevator, x1 on rudder
• x4 middle size servo, 35 x 15 x 30mm (minimum 10kg) // Uses x3 for gear doors and x1 for steering
• Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
• 
  

ARF Pre-Mounted Version (Accs. pre-installed) 2L fuel tank, fuel tank filler, fuel tank exhaust port, servo extension leads, hardware, tail nozzle, Electric retracts with mounted gear doors and controller, Brake controller, pre-installed lights with controller, wingtip missile

PNP version (Accs., Servos and Linkages pre-installed) 2L fuel tank,UAT, fuel tank exhaust port, servo extension leads, hardware, tail nozzle, Electric retracts with controller, Brake controller, pre-installed lights with controller?wingtip missile, Scale Cockpit & Jet Pilot, maintenance stand.

Details about PNP version which includes:

• Complete air frame (including carbon wing-tubes and preinstalled and painted fiberglass control horns)
• JetRuler electric retracts and electric brakes specific for this model (pre-installed)
• Navigation lights and multi-color tail flame afterburner lighting system (pre-installed)
• Servo extension leads (pre-installed)
• Fixed Dual wall thrust pipe (for 60-100N turbines)
• 2 liter fuel tank (Free Upgrade to 2 Liter Kevlar Fuel Tank)
• 220ML UAT
• Pre-prepared pushrods with ball links
• Servo connector brackets
• Pre-glued control horns
• 9X JetRuler high torque servos and extension wires (all pre-installed)
• Free True-to-Scale, Highly Detailed Cockpit with Pilot Figure ($229 value)
• Free JetRuler Wooden Table-Top Maintenance Stand ($49.90 value)
• Free Hobby Heavy Duty Maintenance Stand ($64.90 value)
• Free JetRuler wing bags for the wing & fuselage ($120 value)
• 
  
• Required Engine: 60-100N
• Required all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories

COLOUR SCHEMES AVAILABLE:

Colour scheme 01 :

Colour scheme 02 :

Colour scheme 03 :

Colour scheme 04 :

Colour scheme 05 :

Colour scheme 06 :