JET RULER 1/7 JAS39

Jetruler team are making scale JAS39, this one to go above and beyond as a beautiful scale model. Scale JAS39 jet was made to be reliable and tough enough to actually be flown on a regular basis, and not a problem to transport or put together, all in a package that fly’s brilliantly well.

SPECIFICATIONS:

Model: 1/7 jas39

Wingspan:1370 mm

Length:2340 mm

Weight: 11-12kg

BASIC SETUP:

Control throws:

Aileron: 15 degrees up / 15 degrees down – 50% Expo

Rudder: 30 degrees left / 30 degrees right – 35% Expo

Elevator: 20 degrees / 20 degrees – 35% Expo

The CG is 190mm from the front leading edge on the root of the wing

Canard position

ARF Pro version (Accs., pre-installed)

2.34m JAS-39 jet with 3.5L fuel tank, fuel dot,fuel tank vent,servo connector wire, hardware,tail pipe, Electric retract gear with brake?preinstall navigator lights system, extra free scale cockpit, jet pilot, smoke system, wing bags, and maintenance stand supplied by teamaustars

FEATURES:

Full composite construction, lightweight and strong

INCLUDED HARDWARE:

Complete air frame (including fibreglass control horns)

Carbon fibre wing-tubes

Servo extension leads

Fixed Dual wall thrust pipe (for 100-190N turbines)

Fuel tank (3500ml)

Pre-prepared pushrods with ball links

Pre-glued control horns

REQUIRED HARDWARE:

Turbine: 120-240N

Servos: x7

x2 middle size servo,12-20kg

x5 standard size servo, 30-40kg

Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.

Product Display

COLOUR SCHEMES AVAILABLE:

Colour scheme A :

Colour scheme B :