UAV VTOL Herlea 150kg Thrust Motor TY227D Combo w/400V/80A ESC & 1X Propeller 63 inch

Motor

Model: TY227D

KV: 13 KV

Rated power: 13 KW

Maximum power: 35 KW

Rated voltage: 400 V

Weight: 7.98kg

Number of magnetic steel poles: 42 poles

Voltage range: 300-420V

Rated tension: 75kg

Maximum tension :154.5kg

Voltage :360V

400V 80A ESC

*Support 400V high voltage platform, specially for super heavy load Man-machine customized.

*The use of the third-generation semiconducting material carbonized silicon (SiC) MOS tube, as well as mature new energy vehicle drive architecture design, so that it has the advantages of high power density and high efficiency.

*Equipped with 12V/1A BEC output for easy integration.

*The mature and reliable sensorless FOC algorithm, combined with many years of market verification, forms a perfect development verification system, and promotes high reliability of products.

Product parameter

Model: FF4009

Power modulation type: FOC

Recommended tension: 80~90kg

Recommended battery: 96~100S LiPo

Rated output power: 16KW

Voltage range: 200V~435V

Continuous output current: 80A

Peak output current: 150A (10S)

Maximum speed: 4800RPM(20 poles)

Ambient temperature: -40~50°C

Waterproof rating: IP67

Cooling method: forced air cooling

BEC: 12V/1A

Fixed propeller function: Supported

Motor temperature detection: PT1000

Weight (excluding wire) : 1.5kg

PWM input level: 3.3V/5V

PWM input pulse width: 200~2000uS

PWM input frequency: 5O~5OOHz

Communication interface: CAN*2 (CAN2.0B, 1M bps)

Digital communication throttle: Supported

Firmware upgrade: Supported

Electrical protection strategy: 1. Locked-rotor protection, overcurrent protection; 2. Short circuit protection, overvoltage protection; 3. Undervoltage protection, input signal identification; 4. Overheat power protection, throttle loss protection

PWM

PWM Pulse Width (uS) Motor speed

Forward Direction 1100 ~ 1900 Idle speed to full throttle speed

Forward Direction 1900 ~ 2400 Full throttle speed

Stop Other Pulse 0 RPM

*Idle speed: The minimum speed, for example, 300RPM, can be set on the firmware.

*Full throttle maximum speed: The maximum speed, such as 5000RPM, can be set on the firmware.

Firmware upgrade

1. Upper computer: Sinemotion Tool

2. Upgrader: USB to CAN;

3. Battery or DC power supply;

Method

1. Connect USB to CAN converter between PC and ESC using CANH, CANL and GND;

2. Power on the power supply.

3. On the Firmware page of the ESC test tool, select the serial port, select the firmware file, and click Update.

63 inch Propeller