Wingspan	1300mm (51.2in)
Length	2070mm (81.5in)
Weight	6-6.1kg w/vector nozzle
Turbine Engine	SW80B 8KG brushless/Linton 80x or T95 (required & not included)
Cruising speed	160-180 km/h (For reference only)
Flying time	4-6 mins (full throttle) (For reference only)
Wing area	54 dm2
Wing load
Main material	20 times EPO
Painting surface	matte paint
Suitable experience level	Zero basis ?Beginner ?Intermediate ?Advanced
KIT Assembly difficulty	10mins -30mins -60mins
Suitable for ambient temperature	0-40.
Radio System	9 channel (required & not included)
Control System	MFC-2085 PRO w/gyro (required & not included) PNP included
Servos(required & not included) PNP included	40g×1 Metal gear with 180mm lead (left & right ailerons forward) 25g×5 Metal gear with 150mm lead (rudder & vectoring nozzle forward) 12g×1 Metal gear with 300mm lead (Nose wheel steering reverse) 12g×1 Metal gear with 300mm lead 360°lock (Front wheel cover plate forward) 12g×1 Metal gear with 300mm lead 360°lock (Right of rear wheel cover plate reverse) 12g×1 Metal gear with 50mm lead 360°lock (Left of rear wheel cover plate forward)
Recommended Battery	2S,7.4V,5200mAh×2,LiPo with XT60 type plug(required & not included)
Ailerons	Yes
Flaps	No
Elevator(Horizontal tail)	Yes
Rudder(Vertical tail)	Yes
The smoke system	No
LED lights system	Selective configuration (not included)
Vectoring nozzle system	Yes
Electromagnetic brake system	Selective configuration (not included)
Reinforced gyro	Selective configuration (not included)
Packaging / Size	Packing Box + Outer Box(Card mark)/58.39×23.78×15.75(inch)
CG (Center of Gravity)	mm from the leading edge of the Main Wing
Landing Gears	Metal electric retractable hydraulic landing gear×3 (required & not included)
Battery Charger	LiPo battery charger (required & not included)

Key Features

• Tough and resilient 20 times EPO airframe.
• Crisp and clean airframe mouldings.
• Includes MFC-2085 PRO Version 2022 multi-function flight controller. for PNP
• Minimal assembly time.
• Wing-mounted connector blocks for aileron, flap and light wiring.
• Scale all-moving tailplane.
• Pre-finished (painted and decorated) airframe components.
• Pre-installed jet pipe.
• Pre-installed fuel system.
• Pre-fitted UAT.
• Pre-fitted smoke system.
• Scale tanker refueling system.
• 
  
• Fully equipped with LED navigation and landing lights.
• Main wheels equipped with electromagnetic braking.
• Operational speed brakes.
• 
  
• High strength, 4-point, metal, dual control horns.
• Industry leading packaging aids storage and prevents transport damage.

What's in the Box

• 1x Pre-painted and finished two-part EPO fuselage moulding.
• 1x Pre-painted and finished EPO wing set.
• 1x Pre-painted and finished EPO tailplane set.
• 1x Pre-painted and finished EPO fin and rudder.
• 1x Pre-installed, all metal, scale, oleo style electric retractable undercarriage with brakes.
• 1x Pre-installed aluminium wheel set with durable rubber tyres.
• 1x Pre-installed fuel system with UAT.
• 1x Pre-installed smoke system.
• 1x Pre-installed jet pipe.
• 1x Wing and tail spar set.
• 15x Pre-installed metal gear digital servos.
• 1x Pre-fitted LED navigation and landing light system.
• 1x Pre-installed Multi-function flight controller. MFC 2805 PRO new version 2022
• 1x Hardware pack.
• 1x Comprehensive instruction manual.
• 1x Comprehensive ICS instruction manual.

Needed to Complete

• 1x 9/11-channel transmitter and receiver combo.
• 1x 7 - 8kg turbine. for 3D hovering, 12-17kg
• 2x 2S 7.4V 2200 to 3700mAh LiPo with XT60 connector.
• 1x 2S 7.4V LiPo as directed by engine manufacturer.

Technical Specifications- Weights & Dimensions

•