JP Hobby Alloy Electric Motor Part type ER-200 M4 44mm

Specificities

• Weight: 68g
• Threaded shaft diameter : 4mm
• Threaded shaft lenght: 44mm
• Dimensions: cf pictures

Nota: Depending on the type of retract (retraction on the cylinder side or on the opposite side of the jack) the motor plug must be connected to the JP Hobby controller by observing the polarity (+ on + and - on -) or by reversing the polarities (+ on - and - on +) so as to reverse the retraction.

Warning: If you have connected the motor in the wrong direction, please immediately disconnect the controller motor or the power source, then reverse the motor plug on the controller and test again.