SPECIFICATIONS:

Wingspan:1500mm (59.1in)

Length:1663mm (65.5in)

Flying Weight:6.5kg (14.3 lb)

Turbine Engine:SW60 6KG brushed / SW60B 6KG brushless (required & not included)

Cruising speed:250 km/h

Flying time:6 min (avg)

Wing area:34.28 dm2

Wing load:189.6 g/dm2

Main material:20 times EPO

Painting surface:matte paint

Suitable experience level:Intermediate

PNP Assembly difficulty:10mins 30mins 60mins

Suitable for ambient temperature:0°C-40°C

Radio System:8 channel (required & not included)

Control System:MFC-2085

Servos:

25g×2 Metal gear with 480mm lead (left & right ailerons forward)

25g×3 Metal gear with 190mm lead (Flap×2 & rudder×1 forward)

25g×2 Metal gear with 80mm lead (elevator forward)

12g×1 Metal gear with 300mm lead (Nose wheel steering forward)

12g×1 Metal gear (360°lock Hatch cover forward)

Recommended Battery:2S,7.4V,1800?2000mAh×2,LiPo with T type plug(required & not included)

Ailerons:Yes

Flaps:Yes

Elevator(Horizontal tail):Yes

Rudder(Vertical tail):Yes

The smoke system:Yes

LED lights system:Yes

Electromagnetic brake system:Yes

Reinforced gyro:not included

Packaging / Size:Packing Box + Outer Box(Card mark)/132.5×46×39.5(cm)

CG (Center of Gravity) 170mm from the leading edge of the Main Wing

Landing Gears:Metal electric retractable hydraulic landing gear×3

Battery Charger:LiPo battery charger (required & not included)

PACKAGE INCLUDES:

Fuselage×1

Left Wing×1

Right Wing×1

Left Horizontal Stabilizer×1

Right Horizontal Stabilizer×1

Vertical Stabilizer×1

Nose×1

Cockpit canopy×1

Main wing carbon tube L=598mm external diameter 16mm×1

Horizontal Stabilizer carbon tube L=500mm external diameter 6mm×1

Sticker×1

Capping board×1

Accessories Bag 1 ×1

Nylon rocker arm of the servo ×2

Double sided sponge paper×1

Screw (HM4×35mm)×4 (Nose)

Screw (HM3×14mm)×2 (Wing)

Screw (HM3×10mm)×2 (Wing)

Screw (PA3×14mm)×4 (Engine)

Screw (PA3×10mm)×4 (Tail nozzle)

Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)

Accessories Bag 2 ×1

L type 3mm inner six corner board hand×1

Screw (HM4×35mm)×4 (Nose)

Screw (HM3×14mm)×2 (Wing)

Screw (HM3×10mm)×2 (Wing)

Screw (PA3×14mm)×4 (Engine)

Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)

Manual×1

REQUIRES:

SW60 6KG brushed / SW60B 6KG brushless (required & not included)

8 channel radio system(radio & receiver) (required & not included)

2S,7.4V,1800?2000mAh×2,LiPo with T type plug (required & not included)

LiPo battery charger (required & not included)

Manuals:

Q: What does KIT means?

A:It means aircraft comes without any electronic equipments, such as motor,ESC,servos,remote control,battery,etc. Clients have to buy these equipments themselves.

Q: What does KIT+L means?

A:It's a KIT version but comes with landing gear installed.

Q: What does PNP means?

A: It means the aircraft got equipments already installed and tested, but clients have to buy remote control,receiver,battery and the charger themselves. For example:servos,ESC,power system,landing gear,control system(UBEC included but no power supply), light cables(according to the model of aircrafts).It's a 90% installation.Note: turbojet series products do not include turbojet engine.

Q: What does PNP+T means?

A: It's a PNP version with engine(general means turbine) installed and tested. It's a 95% installation.

Q: What does RTF means?

A: It means the aircraft comes with completely equipment installation(including battery supply,charger,remote control and receiver). It's a 100% installation.