Jingpin Hobby 120mm EDF Specification

Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.

- aluminium shroud body heat sink and cooler structure assures your motor will run cooler.

- The high rigid structure design is capable of running up to 88,000 RPM to produce extremely high efflux velocity

for maximum speed and efficiency

-Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement

for your plastic or carbon shroud if you want to have a safety EDF fan.

-Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been

tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring

a better and safer user experience for every RC fan.

SPECIFICATIONS:

• Material: Aluminum Alloy
• Weight: 24.5 oz./ 695g
• Rotor:12-bladed
• Outer Diameter: 123mm
• Inner Diameter: 120mm
• Inlet Ring: Removable
  

12S Li-Po Set Up:

• RPM: 33,744
  
• Kv Rating: 760
  
• Battery: 12s 44.4V
• Watt: 4972W
  
• Static Thrust: 16.6 lb./ 7.53kg(thrust) (Estimated)
• Start: Soft
• Timing: Low
• Amp Rating: 120-130HV amp esc or higher

Speed Control Advanced Timing Setting: 15 Degrees

VIDEO NOTE: While the video shows the edf unit operating on 39 and 40 volts, this is only for demonstration purposes and is not intended to run at this voltage in a jet. Doing so exceeds the motors parameters and can damage the motor. This is not covered under warranty.