FEATURES
Compatible with all sensorless brushless motors and most of sensored brushless motors such as LRP,
SpeedPassion, Novak, etc.
Seamlessly change to sensorless working mode when the sensor cable is broken.
Excellent start-up, acceleration and linearity features.
Built-in BEC has a powerful output to supply all the electronic equipments.
Firmware can be updated through an USB adapter on the advanced LCD Program Box (Optional equipment).
User programmable. Easily programmed with the “SET” button on the ESC and also compatible with the 3 digital
LEDs Program Card and the advanced professional LCD Program Box.
3 running modes (Forward mode, Forward/Reverse mode, Rock Crawler mode)
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force
adjustment and 4 steps of initial brake force adjustment.
9 start modes (Also called “Punch”) from “very soft (Level 1)” to “very aggressive (Level 9)”.
8 steps of timing adjustment to suitable for all brushless motors.
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss
protection / Motor blocked protection.

Model: XERUN-120A-V2
Cont./ Burst Current: 120A / 760A
Resistance: 0.0003 ohm
Suitable Car: 1/10, 1/12 on-road & off-road, 1/8, 1/10 scale rock crawler
Suite motor: Sensored and sensorless Brushless Motors
5-6 NIMH or 2 Lipo ≥3.5T(on-road), ≥5.5T(off-road)

8-9 NIMH or 3 Lipo ≥5.5T( on-road), ≥8.5T(off-road)
Battery: 4-9 cells NiMH or 2-3 cells Li-Po
BEC Output: 5.75V@3A Built-in BEC
Dimension: 43mm(L) * 36mm(W) * 33mm(H)
Weight 105g
Fan Working Voltage: 5V@0.16A, maximum 8V. (The fan gets the power supply directly from the battery)

Includes:
1 x ESC
1 x ESC cooling fan (integrated)
3 x bullet connectors
1 x Instruction manual (English)