Videos and photos were given by MotionRC team & Essential RC team etc with thanks!

US Coast Guard HH-60 Jayhawk 700 Size Scale Helicopter ARF (Almost Ready to Fly) from Roban - RBN-SF-HH60-7S

This is the Roban HH-60 Jayhawk 700 size ARF, a premium scale kit that offers unparalleled detail. From tip-to-tail the HH-60 body kit displays an accuracy of detail to the real aircraft not normally seen in the RC helicopter hobby.

This kit comes with a full scale detail cockpit with dashboard, joysticks, rudder pedals, aerials, windshield wipers and more. Floor and ceiling details can be crafted so once the interiors are installed you have an impressively scaled cockpit/interior.

These scale kits house the cockpit in precisely the right location and the mechanics are built into the engine compartment just like in the full scale version. The HH-60 really impresses with the highly detailed and accurately scaled down profile.

Requires:

• Helicopter flight controller - we recommend the BavarianDEMON 3X Flybarless System
• Electronic speed control (ESC) - we recommend the Castle Creations Phoenix Edge High Voltage 160A ESC With Cooling Fan
• Battery eliminator circuit (BEC) - we recommend the Castle Creations 20A BEC Pro
• Brushless motor - we recommend the EGODRIFT Scale Collection 4230EC Eclipse 4230-465kV Brushless Motor
• Three cyclic servos - we recommend the MKS DS1220 High Torque Servo Multi-Pack (3 Servos)
• Tail servo - we recommend the MKS DS HBL980
• 12 Cell 44.4V 5000mAh LiPo battery - we recommend the Admiral 5000mAh 6S 22.2V 50C LiPo Battery Multi-Pack in series
• 8 Channel radio - select a minimum 8 channel radio with pitch and throttle curves from our Aircraft Radio Collection
• 8 Channel receiver - select a minimum 8 channel receiver from our Receiver Collection

Features:

• 4 Blade rotorhead and scale carbon fiber rotor blades
• 4 Tail blade head and scale carbon fiber tail blades
• Extremely detailed surface with molded panel lines and rivets
• Complete scale cockpit kit
• Complete built In / partially pre-installed position lighting system (Controlled via AUX channel)
• Special CCPM mechanics built in the top section like the full scale
• Take off weight of 9kg (approximately double of a 700 3D helicopter)
• 1700mm long, 1/10 scale

Includes:

• Roban HH-60 Jayhawk 700 size scale body
• Full 700 size helicopter mechanics
• 4 Carbon fiber rotor blades
• 4 Carbon fiber tail blades
• Complete 7 seat scale cockpit
• Complete built In / partially pre-installed position lighting system

Important Information - Please Read

Roban Scale Helicopters are intended for modelers who have advanced level building skills. Both ARF and KIT product formats require you to install your own electronics (ESC, servos, motor, etc). KIT product formats also require you to install your own helicopter mechanics. Because helicopter mechanics can vary greatly in size and shape, you may be required to modify the fuselage slightly (including cutting, drilling, etc.) to achieve a perfect fit. Roban fuselages are all handmade from fiberglass and therefore may have slight variation in tolerances between body panels, doors, or windows. These variations do not affect flight performance and can be easily adjusted by an experienced builder with proper tools. These precautions are intended for novice builders; an experienced modeler should have no issue achieving perfect results with these premiere scale helicopters kits.

Roban 800 UH-1N ARF Navy Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

the UH-1N in Marines version.

Superscale stands for the UH-1 as

- first-class manufactured and painted GFK fuselage
- elaborate details with rivet pattern and sheet metal joints
- a mechanic that is not visible and provides the interior space for disassembly.
- rotor heads and rotor blades
- Cockpit and rear seats

A scale model that comes from the factory with a high level of detail.
Due to the proven HSM-800 mechanics, which are hidden like in all superscale models, there is enough space and
enough space and room to adapt the model to your own ideas and give it its own character.

The Superscale series offers you a complete package and at the same time the best basis for further own design.

This is Superscale

Scope of delivery
UH-1N painted GRP hull,
HSM-800 mechanics version 2019
2-blade main rotor head + blade set
2-blade tail rotor + blade set
illuminated cockpit
complete seat rows
Weapon set
Scale attachments
Decalset
Installation kit

Recommended equipment
12S 5000mAh
Motor from 450KV - max. 530KV
HV ESC

Technical data
Length: 1765mm
Length with blades: 1960mm
Width: 355mm
Height: 510mm
Rotor diameter: 1760mm
Blade length: 800mm
Diameter Hero: 280mm
Tail blades: 105mm
Main shaft: 12mm
Tail shaft: 5mm
Gear ratio 1:13.8:4.7

Roban 800 UH-1D ARF Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

The B205/UH-1D, also known as the carpet beater, because of the
enormous blade stroke.
Always a pleasure to see and hear the helicopter in the air.

Superscale stands for the B 205 as

- first-class manufactured and painted GFK fuselage
- elaborate details with rivet pattern and sheet metal joints
- a mechanic that is not visible and provides the interior space for disassembly.
- rotor heads and rotor blades
- Cockpit and rear seats

A scale model that comes from the factory with a high level of detail.
Due to the proven HSM-800 mechanics, which are hidden like in all superscale models, there is enough space and
enough space and room to adapt the model to your own ideas and give it its own character.

The Superscale series offers you a complete package and at the same time the best basis for further own design.

This is Superscale

Scope of delivery
205 painted GRP hull,
HSM-800 mechanics version 2019
2-blade main rotor head + blade set
2-blade tail rotor + blade set
illuminated cockpit
complete seat rows
Weapon set
Scale attachments
Decalset
Installation kit

Recommended equipment
12S 5000mAh
Motor from 450KV - max. 530KV
HV ESC

Technical data
Length: 1765mm
Length with blades: 1960mm
Width: 355mm
Height: 510mm
Rotor diameter: 1760mm
Blade length: 800mm
Diameter Hero: 280mm
Tail blades: 105mm
Main shaft: 12mm
Tail shaft: 5mm
Gear ratio 1:13.8:4.7

Roban 800 OH-6 ARF Cayouse Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

A rare model, the OH-6 Cayouse and certainly an eye-catcher on every model airfield.

High-quality workmanship with all details, such as rivets, cable cutters, antennas, etc.
Functioning doors front and rear. The cockpit, which is also illuminated here, also belongs to the

The front canopy is completely removable in order to be able to change the batteries, which are located under the rear floor gap,
under the rear floor gap.

The OH-6 comes with the very proven and reliable HSM-800 mechanics.
A completely conclusive concept with the matching mechanics.

Scope of delivery
OH-6 Cayouse GRP fuselage
HSM-800 mechanics version 2019
4-blade main rotor head
2-blade tail rotor
4-blade set main rotor 750mm S-stroke
2-blade set tail rotor 152mm S-stroke
Illuminated cockpit
Scale attachments
Disc set
Long carbon landing gear
Installation kit

Length incl. rotors 1980mm
Width 590mm
Height 645mm

Roban 800 MD-500E ARF Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

High quality workmanship with all details, like rivets, cable cutters, antennas etc. Functioning doors front and rear.
The front canopy is completely removable in order to be able to change the batteries, which are located under the rear floor gap.
The cockpit, which is also illuminated, is also included.

The Hughes MD500E G-Jive comes with the very proven and reliable HSM-800 mechanics.
A completely conclusive concept with the right mechanics.

Scope of delivery
MD500D GRP fuselage
HSM-800 mechanics version 2019
4-blade main rotor head
2-blade tail rotor
4-blade set main rotor 750mm S-stroke
2-blade set tail rotor 152mm S-stroke
Illuminated cockpit
Scale attachments
Long carbon landing gear
Installation kit

Length incl. rotors 1980mm
Width 590mm
Height 645mm

Roban 800 EC-225 ARF Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

Since the Super Puma is not so often represented in the model range in the 800 size, we have decided to produce
to produce it as a superscale model.

The Super Puma is a workhorse and is said to be able to fly in almost all weather conditions.

As with all superscale models with an incredible amount of detail. Countless panel lines, sheet metal joints and rivets rivets adorn the outer skin of the GRP fuselage.

Fully illuminated cockpit and full seating in the rear.
This is made possible by the use of the well proven HSM-800 mechanics in the complete dome area.
A 5-blade main rotor head and a 4-blade tail rotor lift the Puma into the air.

A retractable landing gear, like the real one, is of course also included.
The front doors and both rear sliding doors are fully functional.

The batteries are stored in the dome area, the dome cover, two-piece is removable.

Recommended equipment
12S 5000mAh
Motor from 450KV - max. 530KV
HV regulator

Length 1700mm
Width 410mm
Height 515mm
Weight ready to fly approx. from 9,5 Kg (depending on equipment and accessories)

Gear ratio HSM-800 mechanics 1:13,8:4,7

Scope of delivery
EC-225 Super Puma painted GFK fuselage
HSM-800 mechanics version 2019
5-blade main rotor head
4-blade tail rotor head
5-blade set 750mm S-stroke
4-blade tail rotor set
Cockpit illuminated
Seating completely rear
Retractable landing gear incl. servos installed
Scale attachments
Decalset
Installation material

Roban 800 EC-145 T2 ARF Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

After the EC-135 now also the EC-145 as T2 version.

The EC-145 comes complete with Fenestron unit, which has already proven itself in several
thousands of EC-135 models and has a lot of thrust.
The goal was to get the same or more thrust at the tail than with a normal tail rotor.
We succeeded and are very pleased with the result.

The model itself comes with massive dimensions and, as usual in our
our superscale series, with a lot of details.
Rivet pattern, sheet metal butts, scale attachments, brilliant 2K paint and lots of unique details.

The EC-145 also features working tail doors.
These open on both sides, with complete forward visibility.
So there's plenty of room here for the perfect scale build.

The EC-145 is powered by the reliable HSM-800 mechanics.
Again, completely installed in the dome area, so that the entire
interior of the helicopter is available for scale building.

Included is the complete cockpit, which is illuminated, as well as
the rear rows of seats.

The sliding side door has a three-point bearing and slides easily back and forth.
The batteries are stored in the floor, as on some other models.

Recommended equipment
12S 5000mAh
Motor from 450KV - max. 530KV
HV regulator
tail servo approx. 20-30Kg

Scale 1:6,2
length 1820mm
width 360mm
Height 570mm
Weight ready to fly approx. from 10 Kg (depending on equipment and accessories)

Example for the performance of the Fenestron
Main rotor speed 1.200rpm > Fenestron speed 14.400rpm

Scope of delivery
EC-145 T2 GFK fuselage painted
Aluminum landing gear
HSM-800 mechanics version 2019
4-blade main rotor head
Fenestron tail rotor unit incl. blade set
Blade set main rotor 750mm S-stroke
Cockpit illuminated
2nd + 3rd row of seats removal
Scale attachments
Decal set
Installation kit

Roban 800 EC-145 T2 ARF Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

After the EC-135 now also the EC-145 as T2 version.

The EC-145 comes complete with Fenestron unit, which has already proven itself in several
thousands of EC-135 models and has a lot of thrust.
The goal was to get the same or more thrust at the tail than with a normal tail rotor.
We succeeded and are very pleased with the result.

The model itself comes with massive dimensions and, as usual in our
our superscale series, with a lot of details.
Rivet pattern, sheet metal butts, scale attachments, brilliant 2K paint and lots of unique details.

The EC-145 also features working tail doors.
These open on both sides, with complete forward visibility.
So there's plenty of room here for the perfect scale build.

The EC-145 is powered by the reliable HSM-800 mechanics.
Again, completely installed in the dome area, so that the entire
interior of the helicopter is available for scale building.

Included is the complete cockpit, which is illuminated, as well as
the rear rows of seats.

The sliding side door has a three-point bearing and slides easily back and forth.
The batteries are stored in the floor, as on some other models.

Recommended equipment
12S 5000mAh
Motor from 450KV - max. 530KV
HV regulator
tail servo approx. 20-30Kg

Scale 1:6,2
length 1820mm
width 360mm
Height 570mm
Weight ready to fly approx. from 10 Kg (depending on equipment and accessories)

Example for the performance of the Fenestron
Main rotor speed 1.200rpm > Fenestron speed 14.400rpm

Scope of delivery
EC-145 T2 GFK fuselage painted
Aluminum landing gear
HSM-800 mechanics version 2019
4-blade main rotor head
Fenestron tail rotor unit incl. blade set
Blade set main rotor 750mm S-stroke
Cockpit illuminated
2nd + 3rd row of seats removal
Scale attachments
Decal set
Installation kit

Roban 800 EC-145 T1 ARF Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

The EC-145 as T1 version, which is still often in use.

The model itself comes with massive dimensions and as usual in our superscale series
our superscale series, with a lot of details.
Rivet pattern, sheet metal butts, scale attachments, brilliant 2K paint and lots of unique details.

The EC-145 also features working tailgates.
These open on both sides, with complete forward visibility.
So there's plenty of room here for the perfect scale build.

The EC-145 is powered by the reliable HSM-800 mechanics.
Again, completely installed in the dome area, so that the entire
interior of the helicopter is available for scale building.
Included is the complete cockpit, which is illuminated, as well as
the rear rows of seats.
The sliding side door has a three-point bearing and slides easily back and forth.
The batteries are stored in the floor, as on some other models.

Recommended equipment
12S 5000mAh
Motor from 450KV - max. 530KV
HV regulator

Scale 1:6,2
length 1760mm
width 360mm
Height 570mm
Weight ready to fly approx. 10 Kg (depending on equipment and accessories)

Scope of delivery
EC-145 GFK fuselage painted
Aluminum landing gear
HSM-800 mechanics version 2019
4-blade main rotor head
2-blade tail rotor
Main rotor blades 750mm S-beat
Tail rotor blades
Cockpit illuminated
2nd + 3rd row of seats removal
Scale attachments
Decal
Installation kit

Product information "EC-135 T3 Air Zermatt"EC-135 T3 Air Zermatt

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

Here in the Air Zermatt version as T3 version.

The EC-135 comes complete with a Fenestron unit on the longhas been tested and optimized.The aim was the same or more thrust at the stern than with oneget normal tail rotor.We succeeded in this and we are very satisfied with the result. The model itself comes with massive dimensions and as usual inour Superscale series, with lots of detailsRivet pattern, sheet metal joints, scale attachments, perfect painting, etc.

Everything is there.

The EC-135 is driven by the proven HSM-800 mechanics.Also here again completely built into the dome area, so it is again the wholeCockpit area for scale expansion / cockpit available.

The scope of delivery includes the complete cockpit, which is illuminated, as wellthe rear rows of seats.

The side sliding door is now three-point supported and easily slides back and forth.As with some other models, the batteries are housed in the floor.

Recommended equipment

Roban 800 EC-135 T2 ARF ADAC Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

EC-135 Yellow

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

The EC-135 comes with Fenestron unit on which was tested and optimized for a long time.
The goal was to get the same, or more thrust at the tail, than with a normal tail rotor.
We succeeded and we are very happy with the result.

The model itself comes with massive dimensions and, as usual in our our superscale series, with a lot of details. Rivet pattern, sheet metal butts, scale attachments, brilliant 2K paint and lots of unique details.

The EC-135 is powered by the reliable HSM-800 mechanics.
Again, completely built in the dome area, so that the entire interior of the helicopter is available for the
is available for scale development.

Included is the complete cockpit, which is illuminated, as well as the rear rows of seats.
The sliding side door has a three-point bearing and slides easily back and forth.
The batteries are stored in the floor, as on some other models.

Recommended equipment
12S 5000mAh
Motor from 450KV - max. 530KV
HV regulator
Tail servo approx. 20-30Kg

Scale 1:6,2
length 1760mm
width 360mm
Height 570mm
Weight ready to fly approx. 10 Kg (depending on equipment and accessories)

Example for the performance of the Fenestron
Main rotor speed 1.200rpm > Fenestron speed 14.400rpm

Scope of delivery
EC-135 GFK fuselage painted
Aluminum landing gear
HSM-800 mechanics version 2019
4-blade main rotor head
Fenestron tail rotor unit
Blade set main- tail rotor
Cockpit illuminated
2 3 row of seats removal
Scale attachments
Installation kit

Roban 800 EC-135 ARF Police Austria Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

The EC-135 comes with
Fenestron unit on which was tested and optimized for a long time.
The goal was to get the same, or more thrust at the tail, than with a normal tail rotor.
We succeeded and we are very happy with the result.

The model itself comes with massive dimensions and, as usual in our our superscale series, with a lot of details. Rivet pattern, sheet metal butts, scale attachments, brilliant 2K paint and lots of unique details.

The EC-135 is powered by the reliable HSM-800 mechanics.
Again, completely built in the dome area, so that the entire interior of the helicopter is available for the
is available for scale development.

Included is the complete cockpit, which is illuminated, as well as the rear rows of seats.
The sliding side door has a three-point bearing and slides easily back and forth.
The batteries are stored in the floor, as on some other models.

Recommended equipment
12S 5000mAh
Motor from 450KV - max. 530KV
HV regulator
Tail servo approx. 20-30Kg

Scale 1:6,2
length 1760mm
width 360mm
Height 570mm
Weight ready to fly approx. 10 Kg (depending on equipment and accessories)

Example for the performance of the Fenestron
Main rotor speed 1.200rpm > Fenestron speed 14.400rpm

Scope of delivery
EC-135 GFK fuselage painted
Aluminum landing gear
HSM-800 mechanics
4-blade main rotor head
Fenestron tail rotor unit
Blade set main- tail rotor
Cockpit illuminated
2 3 row of seats removal
Scale attachments
Installation kit

Roban 800 EC-135 ARF Luftrettung Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

The EC-135 comes with Fenestron unit on which was tested and optimized for a long time.
The goal was to get the same, or more thrust at the tail, than with a normal tail rotor.
We succeeded and we are very happy with the result.

The model itself comes with massive dimensions and, as usual in our our superscale series, with a lot of details. Rivet pattern, sheet metal butts, scale attachments, brilliant 2K paint and lots of unique details.

The EC-135 is powered by the reliable HSM-800 mechanics.
Again, completely built in the dome area, so that the entire interior of the helicopter is available for the
is available for scale development.

Included is the complete cockpit, which is illuminated, as well as the rear rows of seats.
The sliding side door has a three-point bearing and slides easily back and forth.
The batteries are stored in the floor, as on some other models.

Recommended equipment
12S 5000mAh
Motor from 450KV - max. 530KV
HV regulator
Tail servo approx. 20-30Kg

Scale 1:6,2
length 1760mm
width 360mm
Height 570mm
Weight ready to fly approx. 10 Kg (depending on equipment and accessories)

Example for the performance of the Fenestron
Main rotor speed 1.200rpm > Fenestron speed 14.400rpm

Scope of delivery
EC-135 GFK fuselage painted
Aluminum landing gear
HSM-800 mechanics version 2019
4-blade main rotor head
Fenestron tail rotor unit
Blade set main- tail rotor
Cockpit illuminated
2 3 row of seats removal
Scale attachments
Installation kit

Roban 800 EC-135 ARF Lions Air Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

The EC-135 comes with Fenestron unit on which was tested and optimized for a long time.
The goal was to get the same, or more thrust at the tail, than with a normal tail rotor.
We succeeded and we are very happy with the result.

The model itself comes with massive dimensions and, as usual in our our superscale series, with a lot of details. Rivet pattern, sheet metal butts, scale attachments, brilliant 2K paint and lots of unique details.

The EC-135 is powered by the reliable HSM-800 mechanics.
Again, completely built in the dome area, so that the entire interior of the helicopter is available for the
is available for scale development.

Included is the complete cockpit, which is illuminated, as well as the rear rows of seats.
The sliding side door has a three-point bearing and slides easily back and forth.
The batteries are stored in the floor, as on some other models.

Recommended equipment
12S 5000mAh
Motor from 450KV - max. 530KV
HV regulator
Tail servo approx. 20-30Kg

Scale 1:6,2
length 1760mm
width 360mm
Height 570mm
Weight ready to fly approx. 10 Kg (depending on equipment and accessories)

Example for the performance of the Fenestron
Main rotor speed 1.200rpm > Fenestron speed 14.400rpm

Scope of delivery
EC-135 GFK fuselage painted
Aluminum landing gear
HSM-800 mechanics
4-blade main rotor head
Fenestron tail rotor unit
Blade set main- tail rotor
Cockpit illuminated
2 3 row of seats removal
Scale attachments
Installation kit

Roban 800 EC-135 ARF Life Air Rescue White Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

The EC-135 comes with
Fenestron unit on which was tested and optimized for a long time.
The goal was to get the same, or more thrust at the tail, than with a normal tail rotor.
We succeeded and we are very happy with the result.

The model itself comes with massive dimensions and, as usual in our our superscale series, with a lot of details. Rivet pattern, sheet metal butts, scale attachments, brilliant 2K paint and lots of unique details.

The EC-135 is powered by the reliable HSM-800 mechanics.
Again, completely built in the dome area, so that the entire interior of the helicopter is available for the
is available for scale development.

Included is the complete cockpit, which is illuminated, as well as the rear rows of seats.
The sliding side door has a three-point bearing and slides easily back and forth.
The batteries are stored in the floor, as on some other models.

Recommended equipment
12S 5000mAh
Motor from 450KV - max. 530KV
HV regulator
Tail servo approx. 20-30Kg

Scale 1:6,2
length 1760mm
width 360mm
Height 570mm
Weight ready to fly approx. 10 Kg (depending on equipment and accessories)

Example for the performance of the Fenestron
Main rotor speed 1.200rpm > Fenestron speed 14.400rpm

Scope of delivery
EC-135 GFK fuselage painted
Aluminum landing gear
HSM-800 mechanics
4-blade main rotor head
Fenestron tail rotor unit
Blade set main- tail rotor
Cockpit illuminated
2 3 row of seats removal
Scale attachments
Installation kit

Roban 800 EC-135 ARF Life Air Rescue Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

The EC-135 comes with Fenestron unit on which was tested and optimized for a long time.
The goal was to get the same, or more thrust at the tail, than with a normal tail rotor.
We succeeded and we are very happy with the result.

The model itself comes with massive dimensions and, as usual in our our superscale series, with a lot of details. Rivet pattern, sheet metal butts, scale attachments, brilliant 2K paint and lots of unique details.

The EC-135 is powered by the reliable HSM-800 mechanics.
Again, completely built in the dome area, so that the entire interior of the helicopter is available for the
is available for scale development.

Included is the complete cockpit, which is illuminated, as well as the rear rows of seats.
The sliding side door has a three-point bearing and slides easily back and forth.
The batteries are stored in the floor, as on some other models.

Recommended equipment
12S 5000mAh
Motor from 450KV - max. 530KV
HV regulator
Tail servo approx. 20-30Kg

Scale 1:6,2
length 1760mm
width 360mm
Height 570mm
Weight ready to fly approx. 10 Kg (depending on equipment and accessories)

Example for the performance of the Fenestron
Main rotor speed 1.200rpm > Fenestron speed 14.400rpm

Scope of delivery
EC-135 GFK fuselage painted
Aluminum landing gear
HSM-800 mechanics version 2019
4-blade main rotor head
Fenestron tail rotor unit
Blade set main- tail rotor
Cockpit illuminated
2 3 row of seats removal
Scale attachments
Installation kit

Roban 800 EC-135 ARF Police Germany Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

The EC-135 comes with
Fenestron unit on which was tested and optimized for a long time.
The goal was to get the same, or more thrust at the tail, than with a normal tail rotor.
We succeeded and we are very happy with the result.

The model itself comes with massive dimensions and, as usual in our our superscale series, with a lot of details. Rivet pattern, sheet metal butts, scale attachments, brilliant 2K paint and lots of unique details.

The EC-135 is powered by the reliable HSM-800 mechanics.
Again, completely built in the dome area, so that the entire interior of the helicopter is available for the
is available for scale development.

Included is the complete cockpit, which is illuminated, as well as the rear rows of seats.
The sliding side door has a three-point bearing and slides easily back and forth.
The batteries are stored in the floor, as on some other models.

Recommended equipment
12S 5000mAh
Motor from 450KV - max. 530KV
HV regulator
Tail servo approx. 20-30Kg

Scale 1:6,2
length 1760mm
width 360mm
Height 570mm
Weight ready to fly approx. 10 Kg (depending on equipment and accessories)

Example for the performance of the Fenestron
Main rotor speed 1.200rpm > Fenestron speed 14.400rpm

Scope of delivery
EC-135 GFK fuselage painted
Aluminum landing gear
HSM-800 mechanics
4-blade main rotor head
Fenestron tail rotor unit
Blade set main- tail rotor
Cockpit illuminated
2 3 row of seats removal
Scale attachments
Installation kit

Roban 800 BO 105 ARF Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

The BO-105, a helicopter with cult potential.
Therefore we did not miss the opportunity to include this helicopter in our Superscale series.

Our goal was to build the fuselage including the mechanics so that no engine or
or mechanics are visible from the outside.

As you can see on the pictures, we succeeded.
A completely coherent concept with the appropriate mechanics and engine
in the right place, where it belongs.

High quality workmanship with all the details, such as rivets, cable cutters, antennas, etc.
Functional doors in the front, sliding doors in the rear.

The cockpit, which is also illuminated here, is also part of the
as well as the rear seat rows

The BO-105 comes incl. the proven HSM-800 mechanics, which is installed in the dome area.

The model comes as a left-turner, just like the original.

The batteries find their place in the floor area of the model, therefore the rear seat can be removed and the batteries can be stowed underneath.
This also improves the center of gravity.

Technical Data
Length : 1730mm
Width : 465mm
Height : 560mm
Rotor diameter : 1560mm
Rotor blades : 700mm

Recommended with motor from 450KV - max. 530KV
Take off weight approx. from 9Kg (depending on equipment and accessories)

Scope of delivery
Painted GFK fuselage BO-105
HSM-800 mechanics version 2019
4-blade main rotor head, complete ALU
2-blade tail rotor
4-blade set 800mm S-stroke
2-blade set tail rotor 105mm
Cockpit expansion, illuminated
Removal rear row of seats
Attachment parts / Scale accessories
Mounting material

Roban 800 B 412 ARF Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

As with all superscale models, here again, of course, great the processing and the scaled details.
The model comes in the 800 Superscale version with an imposing size of about 1.76m

The proven and reliable HSM-800 mechanism is also used in this model.
This is installed in the dome area, so the rear cockpit area is completely free and is equipped with
seats ex works, but can of course be modified individually by anyone.

As with the B 429, the accumulators are in the floor area in the rear cockpit which benefits the center of gravity.

Recommended equipment
12S 5000mAh
Motor from 450KV - max. 530KV
HV regulator

Technical data
length 1765mm
width 355mm
height 510mm

Take off weight with 12S approx. from 8,2Kg (depending on equipment and accessories)
Rotor diameter 1560mm
Gear ratio 1:13,8:4,7

Scope of delivery
412 GFK fuselage painted
Aluminum landing gear
HSM-800 mechanics version 2019
4-blade main rotor head
2-blade tail rotor
4-blade set 800mm S-Type
2-blade set tail rotor 105mm
Cockpit illuminated
2 3 seat row expansion
Lighting set
Scale attachments
Installation kit

Roban 800 B 412 ARF Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

As with all superscale models, here again, of course, great the processing and the scaled details.
The model comes in the 800 Superscale version with an imposing size of about 1.76m

The proven and reliable HSM-800 mechanism is also used in this model.
This is installed in the dome area, so the rear cockpit area is completely free and is equipped with
seats ex works, but can of course be modified individually by anyone.

As with the B 429, the accumulators are in the floor area in the rear cockpit which benefits the center of gravity.

Recommended equipment
12S 5000mAh
Motor from 450KV - max. 530KV
HV regulator

Technical data
length 1765mm
width 355mm
height 510mm

Take off weight with 12S approx. from 8,2Kg (depending on equipment and accessories)
Rotor diameter 1560mm
Gear ratio 1:13,8:4,7

Scope of delivery
412 GFK fuselage painted
Aluminum landing gear
HSM-800 mechanics version 2019
4-blade main rotor head
2-blade tail rotor
4-blade set 800mm S-Type
2-blade set tail rotor 105mm
Cockpit illuminated
2 3 seat row expansion
Lighting set
Scale attachments
Installation kit

Roban 800 B 222 ARF Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

The B222 comes with a length of 1.79m.
An imposing appearance and a feast for the eyes of the scaler heart.

In the meantime already very proven and reliable, this model also uses the
the HSM-800 mechanics are used.

The two-blade rotor head is damped and with aluminum blade holders.
A completely coherent concept with the appropriate mechanics.

Absolutely high quality workmanship with all details, such as rivets, antennas, and cockpit fittings. Everything like the real thing.
The cockpit itself is illuminated and increases the scale factor many times over.

The landing gear is controlled by three retracts and is completely included.

Scope of delivery
B222 800 GRP fuselage
HSM-800 mechanics Version 2019
Damped 2-blade main rotor head
2-blade tail rotor
2-blade main rotor blades 800mm S-profile
2-blade tail rotor blades 105mm
Illuminated scale cockpit incl. roof area
Damped aluminum landing gear incl. retracts
Scale accessories
Installation kit

Recommended equipment
12S 5000mAh
Motor from 450KV - max. 530KV
HV ESC

Dimensions
length 1794mm
width 580mm
height 510mm

Take off weight with 12S approx. 8,5Kg (depending on equipment and accessories)
Rotor diameter 1760mm
Gear ratio 1:13,8:4,7

Roban 800 B 222 ARF Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

The B222 comes with a length of 1.79m.
An imposing appearance and a feast for the eyes of the scaler heart.

In the meantime already very proven and reliable, this model also uses the
the HSM-800 mechanics are used.

The two-blade rotor head is damped and with aluminum blade holders.
A completely coherent concept with the appropriate mechanics.

Absolutely high quality workmanship with all details, such as rivets, antennas, and cockpit fittings. Everything like the real thing.
The cockpit itself is illuminated and increases the scale factor many times over.

The landing gear is controlled by three retracts and is completely included.

Scope of delivery
B222 800 GRP fuselage
HSM-800 mechanics Version 2019
Damped 2-blade main rotor head
2-blade tail rotor
2-blade main rotor blades 800mm S-profile
2-blade tail rotor blades 105mm
Illuminated scale cockpit incl. roof area
Damped aluminum landing gear incl. retracts
Scale accessories
Installation kit

Recommended equipment
12S 5000mAh
Motor from 450KV - max. 530KV
HV ESC

Dimensions
length 1794mm
width 580mm
height 510mm

Take off weight with 12S approx. 8,5Kg (depending on equipment and accessories)
Rotor diameter 1760mm
Gear ratio 1:13,8:4,7

Roban 800 B 212 ARF Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

As with all superscale models, here again, of course, great the processing and the scaled details.
The model comes in the 800 Superscale version with an imposing size of about 1.76m

The proven and reliable HSM-800 mechanism is also used in this model.
This is installed in the dome area, so the rear cockpit area is completely free and is equipped with
seats ex works, but can of course be modified individually by anyone.

As with the B 429, the accumulators are in the floor area in the rear cockpit which benefits the center of gravity.

Recommended equipment
12S 5000mAh
Motor from 450KV - max. 530KV
HV regulator

Technical data
length 1765mm
width 355mm
height 510mm

Take off weight with 12S approx. from 8,2Kg (depending on equipment and accessories)
Rotor diameter 1560mm
Gear ratio 1:13,8:4,7

Scope of delivery
212 GFK fuselage painted
Aluminum landing gear
HSM-800 mechanics version 2019
2-blade main rotor head
2-blade tail rotor
2-blade set 800mm S-stroke
2-blade set tail rotor 105mm
Cockpit illuminated
2 3 seat row expansion
Lighting set
Scale attachments
Installation kit

Roban 800 B 212 ARF Helicopter

2021 is a tough year for all the manufacturers including Roban Team. Painting is a big job required by the local government. Painting may need 15-30 days. So, Please be patient after you placed the order

As with all superscale models, here again, of course, great the processing and the scaled details.
The model comes in the 800 Superscale version with an imposing size of about 1.76m

The proven and reliable HSM-800 mechanism is also used in this model.
This is installed in the dome area, so the rear cockpit area is completely free and is equipped with
seats ex works, but can of course be modified individually by anyone.

As with the B 429, the accumulators are in the floor area in the rear cockpit which benefits the center of gravity.

Recommended equipment
12S 5000mAh
Motor from 450KV - max. 530KV
HV regulator

Technical data
length 1765mm
width 355mm
height 510mm

Take off weight with 12S approx. from 8,2Kg (depending on equipment and accessories)
Rotor diameter 1560mm
Gear ratio 1:13,8:4,7

Scope of delivery
212 GFK fuselage painted
Aluminum landing gear
HSM-800 mechanics version 2019
2-blade main rotor head
2-blade tail rotor
2-blade set 800mm S-stroke
2-blade set tail rotor 105mm
Cockpit illuminated
2 3 seat row expansion
Lighting set
Scale attachments
Installation kit