iPeaka BLHeli Series 12A 20A 30A 40A ESC

Description:

Item Name: BLHeli Series ESC
Current: 12A 20A 30A 40A available

Features:

Overview

iPeaka ESC SK30A w/SimonK firmware Pre-soldered 3.5mm Gold connector

Please note:These esc`s DO NOT monitor the battery voltage. A Lipo alarm or a telemetry system should be used for that purpose.

iPeaka SK 30A - Pre-soldered 3.5mm Gold Connector

Features of the iPeaka SK series Speed Controllers include:

• Extremely low output resistance for efficient operation

• 3-stage protection: Low Voltage Cutoff, Over-Heat Protection & Signal Loss

• 3 Start Modes available: Normal, Soft and Very Soft

• Adjustable Throttle Endpoints to match virtually all transmitter models

• Smooth linear throttle operation for precise control

• High RPM capability: 210,000 (2-pole), 70,000 (6-pole), 30,000 (14 pole)

Specifications of the iPeaka SK 30 Amp Speed Controller:

Input Voltage ..................... 6-18.8 VDC, 2-4 Li-Po cells

Input rate range................ 50-400Hz

Output Current ................... 30 Amps Continous, 40 Amps Burst (10 Sec.)

BEC Output ...................... 5.0 Volts at 3 Amps

Dimensions ........................ 48 x 26 x 11 mm

Weight ............................... 28g

Package included:

- 1 x iPeaka SK 30A ESC Pre-soldered 3.5mm gold connector

Overview

Overview

Please note:These esc`s DO NOT monitor the battery voltage. A Lipo alarm or a telemetry system should be used for that purpose.

iPeaka SK10A

Features of the iPeaka SK series Speed Controllers include:

• Extremely low output resistance for efficient operation

• 3-stage protection: Low Voltage Cutoff, Over-Heat Protection & Signal Loss

• 3 Start Modes available: Normal, Soft and Very Soft

• Adjustable Throttle Endpoints to match virtually all transmitter models

• Smooth linear throttle operation for precise control

• High RPM capability: 210,000 (2-pole), 70,000 (6-pole), 30,000 (14 pole)

Specifications of the iPeaka SK 10 Amp Speed Controller:

Input Voltage ..................... 6-12.6 VDC, 2-3 Li-Po cells

Input rate range................ 50-400Hz

Output Current ................... 10 Amps Continous, 12 Amps Burst (10 Sec.)

BEC Output ...................... 5.0 Volts at 2 Amps

Dimensions ........................ 35 x 24 x 8 mm

Weight ............................... 12 g

Package included:

- 1 x iPeaka SK 10A ESC

Overview

Please note:These esc`s DO NOT monitor the battery voltage. A Lipo alarm or a telemetry system should be used for that purpose.

iPeaka SK22A w/SimonK firmware

Features of the iPeaka SK series Speed Controllers include:

• Extremely low output resistance for efficient operation

• 3-stage protection: Low Voltage Cutoff, Over-Heat Protection & Signal Loss

• 3 Start Modes available: Normal, Soft and Very Soft

• Adjustable Throttle Endpoints to match virtually all transmitter models

• Smooth linear throttle operation for precise control

• High RPM capability: 210,000 (2-pole), 70,000 (6-pole), 30,000 (14 pole)

Specifications of the iPeaka SK 22 Amp Speed Controller:

Input Voltage ..................... 6-18.8 VDC, 2-4 Li-Po cells

Input rate range................ 50-400Hz

Output Current ................... 22 Amps Continous, 26 Amps Burst (10 Sec.)

BEC Output ...................... 5.0 Volts at 2 Amps

Dimensions ........................ 35 x 24 x 8 mm

Weight ............................... 25g

Package included:

- 1 x iPeaka SK 22A ESC

Overview

Please note:These esc`s DO NOT monitor the battery voltage. A Lipo alarm or a telemetry system should be used for that purpose.

iPeaka SK22A w/SimonK firmware

Features of the iPeaka SK series Speed Controllers include:

• Extremely low output resistance for efficient operation

• 3-stage protection: Low Voltage Cutoff, Over-Heat Protection & Signal Loss

• 3 Start Modes available: Normal, Soft and Very Soft

• Adjustable Throttle Endpoints to match virtually all transmitter models

• Smooth linear throttle operation for precise control

• High RPM capability: 210,000 (2-pole), 70,000 (6-pole), 30,000 (14 pole)

Specifications of the iPeaka SK 22 Amp Speed Controller:

Input Voltage ..................... 6-18.8 VDC, 2-4 Li-Po cells

Input rate range................ 50-400Hz

Output Current ................... 22 Amps Continous, 26 Amps Burst (10 Sec.)

BEC Output ...................... 5.0 Volts at 2 Amps

Dimensions ........................ 35 x 24 x 8 mm

Weight ............................... 25g

Package included:

- 1 x iPeaka SK 22A ESC Pre-soldered 3.5mm gold connector

Overview

iPeaka Slim BL22A ESC

Features:

- All N-channel MOSFET design
- Support PWM, PPM signals input.
- Width is less than 13mm, can be installed inside the arm tube of multicopters.

Specifications:

- Model: BL22A
- Constant Current: 22A
- Max Current: 28A for 10 seconds
- Input Voltage: 2-4S Lipo
- BEC Output: NO
- Response:20-500Hz
- PCB Size: 12mmX 50mm (excluding capacitor)
- Weight: 10.2 g (including wires)

Program chart:

Package included:

- 1 x BL22A

Overview

Please note:These esc`s DO NOT monitor the battery voltage. A Lipo alarm or a telemetry system should be used for that purpose.

iPeaka SK30A w/SimonK firmware

Features of the iPeaka SK series Speed Controllers include:

• Extremely low output resistance for efficient operation

• 3-stage protection: Low Voltage Cutoff, Over-Heat Protection & Signal Lost

• 3 Start Modes available: Normal, Soft and Very Soft

• Adjustable Throttle Endpoints to match virtually all transmitter models

• Smooth linear throttle operation for precise control

• High RPM capability: 210,000 (2-pole), 70,000 (6-pole), 30,000 (14 pole)

Specifications of the iPeaka SK 30 Amp Speed Controller:

Input Voltage ..................... 6-18.8 VDC, 2-4 Li-Po cells

Input rate range................ 50-400Hz

Output Current ................... 30 Amps Continous, 40 Amps Burst (10 Sec.)

BEC Output ...................... 5.0 Volts at 3 Amps

Dimensions ........................ 48 x 26 x 11 mm

Weight ............................... 28g

Package included:

- 1 x iPeaka SK 30A ESC r

iPeaka UBEC 5V 3A

This small and lightweight UBEC features a high efficiency switching mode BEC, providing better heat dissipation when compared to linear voltage regulation.

Eliminates the need for a seperate receiver battery. This UBEC can safely power up to 10 standard medium torque (60 oz) servos or up to 12 mini servos. Input voltage is 5 - 34 volts (2- 8 cell LiPo pack). Output voltage is 5 volts with 5 amps continuous, 8 amp short duration. Comes with a standard receiver plug and wires for connecting directly to your non-BEC speed controller. For use with 72mhz or 2.4 Ghz radio systems.

Specs:

Dimensions: 1.5" x .88" x .40".

Weight: .6 oz.

iPeaka UBEC 5V 3A

This small and lightweight UBEC features a high efficiency switching mode BEC, providing better heat dissipation when compared to linear voltage regulation.

Eliminates the need for a seperate receiver battery. This UBEC can safely power up to 10 standard medium torque (60 oz) servos or up to 12 mini servos. Input voltage is 5 - 34 volts (2- 8 cell LiPo pack). Output voltage is 5 volts with 5 amps continuous, 8 amp short duration. Comes with a standard receiver plug and wires for connecting directly to your non-BEC speed controller. For use with 72mhz or 2.4 Ghz radio systems.

Specs:

Dimensions: 1.5" x .88" x .40".

Weight: .6 oz.

iPeaka 20A 4 in 1 Quattro ESC/ 2-6S

MultiRotor Pilots has been very popular as a new generation of RC model aircraft, which is simple structure, light weight and easy to fly. However, as there are four motors in the four corners, normally there are four ESCs to control each motor, which is complicated to assembly and set up. Since iFlight has developed the iPeaka-Quattro-20A ESC, problems will be solved.

iPeaka BLHeli Series 12A 20A 30A 40A ESC

Description:

Item Name: BLHeli Series ESC
Current: 12A 20A 30A 40A available

Features:

iPeaka BLHeli Series 12A 20A 30A 40A ESC

Description:

Item Name: BLHeli Series ESC
Current: 12A 20A 30A 40A available

Features:

Overview

iPeaka BLHeli Series 12A 20A 30A 40A ESC

Description:

Item Name: BLHeli Series ESC
Current: 12A 20A 30A 40A available

Features:

iPeaka 40A ESC w/HW Firmware

iPeaka 40A ESC with integrated 5V/3A linear BEC circuit and fast response offering smooth throttle response, low voltage cut-off protection and burst current capability of 50A

Specifications:

-Dimension:55 x 26 x 12.5mm

-Constant current 40A Max 45A <10s

-Weight : 35g

-High Voltage Li-Poly 2-4 cells, Ni-MH 5-12 cells

-Low resistant 0.0025 ohms

-Dynamic braking

-Built-in BEC : 5V/3A

User programming options

Battery Setting

Throttle Range

Brake Setting 4 options

Direction and Cutoff Type

iPeaka 30A ESC w/HW Firmware

iPeaka 30A ESC with integrated 5V/2A linear BEC circuit and fast response offering smooth throttle response, low voltage cut-off protection and burst current capability of 40A

Specifications:

-Dimension:46 x 26 x 11 mm

-Weight: 25g

-Constant current 30A Max 40A <10s

-Li-Poly 2-4 cells; Ni-MH 5-12 cells Auto Detect

-Brake On/Off;

-BEC: 2A

-Auto Low battery Slow down at 3.0V/cell Lipo, cut-off at 2.9V/cell Lipo

Programmable features include:

Cell Type and No. of Cells

Brake setting / throttle type

iPeaka 30A 4 in 1 Quattro ESC/ 2-6S

MultiRotor Pilots has been very popular as a new generation of RC model aircraft, which is simple structure, light weight and easy to fly. However, as there are four motors in the four corners, normally there are four ESCs to control each motor, which is complicated to assembly and set up. Since iFlight has developed the iPeaka-Quattro-20A ESC, problems will be solved.

iPeaka 22A ESC w/HW Firmware

iPeaka 22A ESC with integrated 5V/1A linear BEC circuit and fast response offering smooth throttle response, low voltage cut-off protection and burst current capability of 12A.

Specifications:

-Dimension:46 x 26 x 9 mm

-Weight: 21g

-Constant current 22A Max 25A <10s

-Li-Poly 2-4 cells; Ni-MH 5-12 cells Auto Detect

-Brake On/Off;

-BEC: 2A

-Auto Low battery Slow down at 3.0V/cell Lipo, cut-off at 2.9V/cell Lipo

Programmable features include:

Cell Type and No. of Cells

Brake setting / throttle type

iPeaka 10A ESC w/HW Firmware

iPeaka 10A ESC with integrated 5V/1A linear BEC circuit and fast response offering smooth throttle response, low voltage cut-off protection and burst current capability of 12A.

Specifications:

-Dimension:32 x 24 x 8 mm

-Weight: 10g

-Constant current 10A Max 12A <10s

-Li-Poly 2-3 cells; Ni-MH 5-12 cells Auto Detect

-Brake On/Off;

-BEC: 1A

-Auto Low battery Slow down at 3.0V/cell Lipo, cut-off at 2.9V/cell Lipo

Programmable features include:

Cell Type and No. of Cells

Brake setting / throttle type