Hobbywing Seaking V3 ESCs:

• The water-proof level of the “SEAKING V3” series has reached IP67, indicating the speed controllers can operate
in water and users can directly use them without taking any precaution measures. (Note: please fully dry all the
connectors after use for avoiding rustiness.)
• The Copper Bar Heat Conduction technology (exclusively patented), water-cooling system and MOSFET with
extremely low internal resistance, all these greatly upgrade the over-current withstanding capability and
reliability of the speed controllers.
• Brand-new software specially designed for RC boats, featured by excellent start-up & acceleration performance.
In addition, it has outstanding adaptability to sudden load change caused by the hull bumping in sailing.
• 2 running modes: “Forward Only” and “Forward and Backward” for different applications.
• Multiple protections like low-voltage cutoff protection, over-heat protection and throttle signal loss protection,
those features specially designed for RC boats are reasonable and personalized.
• 8 options for timing adjustments, compatible with most kinds of sensorless brushless motors.
• Pocket-sized program card can help users to set the speed controller easily. (Note: The program card is optional & not included)

Hobbywing Seaking 180A Waterproof Brushless ESC for Boats SeaKing-180A-V3

Programmable Items:

Includes:
1 x ESC Seaking V3

Hobbywing Seaking V3 ESCs:

• The water-proof level of the “SEAKING V3” series has reached IP67, indicating the speed controllers can operate
in water and users can directly use them without taking any precaution measures. (Note: please fully dry all the
connectors after use for avoiding rustiness.)
• The Copper Bar Heat Conduction technology (exclusively patented), water-cooling system and MOSFET with
extremely low internal resistance, all these greatly upgrade the over-current withstanding capability and
reliability of the speed controllers.
• Brand-new software specially designed for RC boats, featured by excellent start-up & acceleration performance.
In addition, it has outstanding adaptability to sudden load change caused by the hull bumping in sailing.
• 2 running modes: “Forward Only” and “Forward and Backward” for different applications.
• Multiple protections like low-voltage cutoff protection, over-heat protection and throttle signal loss protection,
those features specially designed for RC boats are reasonable and personalized.
• 8 options for timing adjustments, compatible with most kinds of sensorless brushless motors.
• Pocket-sized program card can help users to set the speed controller easily. (Note: The program card is optional & not included)

Hobbywing Seaking 120A Waterproof Brushless ESC for Boats SeaKing-120A-V3

Programmable Items:

Includes:
1 x ESC Seaking V3

Features

1 Use top quality electronic components to enhance the current endurance ability of the ESC.
2 Special designed for RC boat, with excellent start-up, acceleration and linearity features.
3 With water cooling heat-sink and the whole ESC is waterproof to get a longer life.
4 Anti-spark circuit eliminates sparks when the battery pack is connecting with the ESC.
5 Multiple protection features: Low voltage cutoff protection to prolong the battery life / Over-heat protection / Throttle signal loss protection.
6 With 8 steps of timing adjustment, compatible with most of sensorless brushless motors.
7 User programmable.
8 Multiple program methods supported: Transmitter stick, LED Program Card. Very easy to program the ESC at home or at the racing field.

Specification

1 Output: Continuous current 130A, burst current 180A.
2 Input: 15-36 cells NiMH/NiCd or 5-12 cells LiPo.
3 BEC Output: No Built-in BEC.
4 Suitable Motor: Sensorless Brushless Motor.
5 Water Cooling Pipe: 5.0mm (external diameter)
6 Size: 88mm(L) * 58mm(W) * 23mm(H).
7 Weight: 182g

* This ESC does NOT support reverse function, and can only run forward. (the description about forward/backward in the manual is incorrect)

Includes:
1 x ESC
1 x water colling system (pre-installed)
1 x Instruction manual (English)

Includes:
1 x ESC
1 x ESC cooling fan (integrated)
3 x bullet connectors
1 x Instruction manual (English)

FEATURES
Compatible with all sensorless brushless motors and most of sensored brushless motors such as LRP,
SpeedPassion, Novak, etc.
Seamlessly change to sensorless working mode when the sensor cable is broken.
Excellent start-up, acceleration and linearity features.
Built-in BEC has a powerful output to supply all the electronic equipments.
Firmware can be updated through an USB adapter on the advanced LCD Program Box (Optional equipment).
User programmable. Easily programmed with the “SET” button on the ESC and also compatible with the 3 digital
LEDs Program Card and the advanced professional LCD Program Box.
3 running modes (Forward mode, Forward/Reverse mode, Rock Crawler mode)
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force
adjustment and 4 steps of initial brake force adjustment.
9 start modes (Also called “Punch”) from “very soft (Level 1)” to “very aggressive (Level 9)”.
8 steps of timing adjustment to suitable for all brushless motors.
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss
protection / Motor blocked protection.

Model: XERUN-120A-V2
Cont./ Burst Current: 120A / 760A
Resistance: 0.0003 ohm
Suitable Car: 1/10, 1/12 on-road & off-road, 1/8, 1/10 scale rock crawler
Suite motor: Sensored and sensorless Brushless Motors
5-6 NIMH or 2 Lipo ≥3.5T(on-road), ≥5.5T(off-road)

8-9 NIMH or 3 Lipo ≥5.5T( on-road), ≥8.5T(off-road)
Battery: 4-9 cells NiMH or 2-3 cells Li-Po
BEC Output: 5.75V@3A Built-in BEC
Dimension: 43mm(L) * 36mm(W) * 33mm(H)
Weight 105g
Fan Working Voltage: 5V@0.16A, maximum 8V. (The fan gets the power supply directly from the battery)

Includes:
1 x ESC
1 x ESC cooling fan (integrated)
3 x bullet connectors
1 x Instruction manual (English)

SPECIFICATIONS
Model: XERUN-150A
Cont./ Burst Current: 150A/950A
Resistance: 0.0002 ohm
Suitable Car: 1/5, 1/8 on-road, off-road and monster, Super powerful applications
Suitable motors: Sensored and sensorless Brushless Motors
≥4.5T, KV≤ 3000 (Works with 4S Lipo) or
≥6T, KV≤2400 (Works with 6S Lipo)
Battery: 6-18 cells NiMH or 2-6 cells Li-Po
BEC Output: 5.75V@3A Switch mode built-in BEC
Dimension: 58mm(L) * 46.5mm(W) * 35mm(H)
Weight: 105g (Wires not included)
Cooling Fan Working Voltage: 5V, maximum 8V. (The fan gets the power supply from the built-in BEC)

Includes:
1 x ESC
1 x ESC cooling fan (integrated)
3 x bullet connectors
1 x Instruction manual (English)

Typical application: 1:8 off-road truck like E-Maxx, E-Revo or Savage etc.

Includes:
1 x ESC XERUN-150A
1 x motor XERUN-4274SL
2 x motor pinions (32pitch 21T and 17T)
1 x 2-in-1 program card
1 x Instruction manual (English)

FEATURES
Compatible with all sensorless brushless motors and most of sensored brushless motors such as LRP,
SpeedPassion, Novak, etc.
Seamlessly change to sensorless working mode when the sensor cable is broken.
Excellent start-up, acceleration and linearity features.
Built-in BEC has a powerful output to supply all the electronic equipments.
Firmware can be updated through an USB adapter on the advanced LCD Program Box (Optional equipment).
User programmable. Easily programmed with the “SET” button on the ESC and also compatible with the 3 digital
LEDs Program Card and the advanced professional LCD Program Box.
3 running modes (Forward mode, Forward/Reverse mode, Rock Crawler mode)
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force
adjustment and 4 steps of initial brake force adjustment.
9 start modes (Also called “Punch”) from “very soft (Level 1)” to “very aggressive (Level 9)”.
8 steps of timing adjustment to suitable for all brushless motors.
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss
protection / Motor blocked protection.

Model: XERUN-60A-V2
Cont./ Burst Current: 60A/360A
Resistance: 0.0006 ohm
Suitable Car: 1/10, 1/12 on-road & off-road, 1/8, 1/10 scale rock crawler
Suite motors: Sensored and sensorless Brushless Motors
5-6 NIMH or 2 Lipo ≥5.5T(on-road), ≥Suitable 8.5T(off-road)
8-9 NIMH or 3 Lipo ≥10.5T(on-road), ≥17.5T(off-road)
Battery: 4-9 cells NiMH or 2-3 cells Li-Po
BEC Output: 5.75V@3A Built-in BEC
Dimension: 43mm(L) * 36mm(W) * 33mm(H)
Weight: 80g
Fan Working Voltage: 5V@0.16A, maximum 8V. (The fan gets the power supply directly from the battery)

Includes:
1 x ESC
1 x ESC cooling fan (integrated)
3 x bullet connectors
1 x Instruction manual (English)

XERUN-60A ESC + 5.5T (6000KV) Sensored Motor + LCD Program Card Combo For 1/10 Car (Competitive Race)

Includes:
1 x ESC XERUN-60A
1 x sensored bushless motor
1 x program card
1 x Instruction manual (English)

XERUN-60A ESC + 6.5T (5200KV) Sensored Motor + LCD Program Card Combo For 1/10 Car (Competitive Race)

Includes:
1 x ESC XERUN-60A
1 x sensored bushless motor 6.5T
1 x program card
1 x Instruction manual (English)

Downloads:
ESC manual

XERUN-60A ESC + 8.5T (4000KV) Sensored Motor + LCD Program Card Combo For 1/10 Car (Competitive Race)

Includes:
1 x ESC XERUN-60A
1 x sensored bushless motor 8.5T
1 x program card
1 x Instruction manual (English)

Compatible with all sensorless brushless motors and most of sensored brushless motors such as LRP,
SpeedPassion, Novak, etc.
Seamlessly change to sensorless working mode when the sensor cable is broken.
Excellent start-up, acceleration and linearity features.
Built-in switch mode BEC has a powerful output to supply all the electronic equipments.
Firmware can be updated through an USB adapter on the advanced LCD Program Box (Optional equipment).
User programmable. Easily programmed with the “SET” button on the ESC and also compatible with the 3
digital LEDs Program Card and the advanced professional LCD Program Box.
3 running modes (Forward mode, Forward/Reverse mode, Rock Crawler mode)
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of
drag-brake force adjustment and 4 steps of initial brake force adjustment.
9 start modes (Also called “Punch”) from “very soft (Level 1)” to “very aggressive (Level 9)”.
8 steps of timing adjustment to suitable for all brushless motors.
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss
protection / Motor blocked

SPECIFICATIONS
Model: XERUN-80A
Cont./ Burst Current: 80A / 380A
Resistance: 0.0006 ohm
Suitable Car: 1/8 on-road, off-road and monster RTR applications
Suitable motors: Sensored and sensorless Brushless Motors
≥6T, KV≤2400 (Works with 4S Lipo)
Battery: 6-12 cells NiMH or 2-4 cells Li-Po
BEC Output: 5.75V@3A Switch mode built-in BEC
Dimension: 58mm(L) * 46.5mm(W) * 35mm(H)
Weight: 105g (Wires not included)
Cooling Fan Working Voltage: 5V, maximum 8V. (The fan gets the power supply from the built-in BEC)

Includes:
1 x ESC
1 x ESC cooling fan (integrated)
3 x bullet connectors
1 x Instruction manual (English)

Includes:
1 x ESC XERUN-80A
1 x motor XERUN-4168SL
2 x motor pinions (M1 13T and 32pitch 13T)
1 x Instruction manual (English)

Includes:
1 x ESC XERUN-80A
1 x motor XERUN-4168SL
2 x motor pinions (M1 13T and 32pitch 13T)
1 x 2-in-1 program card
1 x Instruction manual (English)

High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
Maximum motor speed: 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).
3 start modes: Normal / Soft / Very-Soft, compatible with fixed-wing aircraft and helicopter.
Throttle range can be configured to be compatible with all transmitters currently available on market.
Smooth, linear, quick and precise throttle response.
Separate voltage regulator IC for microprocessor to get a better anti-jamming capability.
Multiple protection features: Low-voltage cut-off protection / over-heat protection / throttle signal loss protection.
The output of the built-in BEC is switchable by user programming (5.25V or 6.0V).
With governor mode for helicopter.
USB supported. The firmware of the ESC can be updated by the USB adapter.
Several kinds of Program Cards are supported. Very easy to program the ESC at home or at the field.

Platinum Series
Normal Voltage ESC?Supports 2 to 6 Cells Lipo)
Class	Model	Cont. Current	Burst Current	BEC Mode	BEC Output	User Programmable	Battery Cells		Weight	Size
							Lipo	NiMH		L*W*H
40A	Platinum-40A	40A	60A	Switch	5.25V or 6V, 3A	Yes	2-6	5-18	38g	59*27*12
60A	Platinum-60A	60A	90A	Switch	5.25V or 6V, 3A	Yes	2-6	5-18	68g	70*34*16
80A	Platinum-80A	80A	120A	Swicth	5.25V or 6V, 3A	Yes	2-6	5-18	77g	70*34*16
100A	Platinum-100A	100A	150A	Switch	5.25V or 6V, 3A	Yes	2-6	5-18	82g	70*34*16
150A	Platinum-150A-OPTO	150A	220A	None	None	Yes	2-6	5-18	125g	88*55*15
High Voltage ESC?Supports 5 to 12 Cells Lipo)
50A	Platinum-50A-HV	50A	75A	None	None	Yes	5-12	15-36	68g	70*34*16
70A	Platinum-70A-HV	70A	105A	None	None	Yes	5-12	15-36	82g	70*34*16
100A	Platinum-100A-HV	100A	150A	None	None	Yes	5-12	15-36	123g	88*55*15
120A	Platinum-120A-HV	120A	180A	None	None	Yes	5-12	15-36	125g	88*55*15

Includes:
1 x ESC
1 x English Manual

High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
Maximum motor speed: 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).
3 start modes: Normal / Soft / Very-Soft, compatible with fixed-wing aircraft and helicopter.
Throttle range can be configured to be compatible with all transmitters currently available on market.
Smooth, linear, quick and precise throttle response.
Separate voltage regulator IC for microprocessor to get a better anti-jamming capability.
Multiple protection features: Low-voltage cut-off protection / over-heat protection / throttle signal loss protection.
With governor mode for helicopter.
Several kinds of Program Cards are supported. Very easy to program the ESC at home or at the field.

Platinum Series
Normal Voltage ESC?Supports 2 to 6 Cells Lipo)
Class	Model	Cont. Current	Burst Current	BEC Mode	BEC Output	User Programmable	Battery Cells		Weight	Size
							Lipo	NiMH		L*W*H
40A	Platinum-40A	40A	60A	Switch	5.25V or 6V, 3A	Yes	2-6	5-18	38g	59*27*12
60A	Platinum-60A	60A	90A	Switch	5.25V or 6V, 3A	Yes	2-6	5-18	68g	70*34*16
80A	Platinum-80A	80A	120A	Swicth	5.25V or 6V, 3A	Yes	2-6	5-18	77g	70*34*16
100A	Platinum-100A	100A	150A	Switch	5.25V or 6V, 3A	Yes	2-6	5-18	82g	70*34*16
150A	Platinum-150A-OPTO	150A	220A	None	None	Yes	2-6	5-18	125g	88*55*15
High Voltage ESC?Supports 5 to 12 Cells Lipo)
50A	Platinum-50A-HV	50A	75A	None	None	Yes	5-12	15-36	68g	70*34*16
70A	Platinum-70A-HV	70A	105A	None	None	Yes	5-12	15-36	82g	70*34*16
100A	Platinum-100A-HV	100A	150A	None	None	Yes	5-12	15-36	123g	88*55*15
120A	Platinum-120A-HV	120A	180A	None	None	Yes	5-12	15-36	125g	88*55*15

Includes:
1 x ESC
1 x English Manual

High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
Maximum motor speed: 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).
3 start modes: Normal / Soft / Very-Soft, compatible with fixed-wing aircraft and helicopter.
Throttle range can be configured to be compatible with all transmitters currently available on market.
Smooth, linear, quick and precise throttle response.
Separate voltage regulator IC for microprocessor to get a better anti-jamming capability.
Multiple protection features: Low-voltage cut-off protection / over-heat protection / throttle signal loss protection.
The output of the built-in BEC is switchable by user programming (5.25V or 6.0V).
USB supported. The firmware of the ESC can be updated by the USB adapter.
Several kinds of Program Cards are supported. Very easy to program the ESC at home or at the field.

Platinum Series
Normal Voltage ESC?Supports 2 to 6 Cells Lipo)
Class	Model	Cont. Current	Burst Current	BEC Mode	BEC Output	User Programmable	Battery Cells		Weight	Size
							Lipo	NiMH		L*W*H
40A	Platinum-40A	40A	60A	Switch	5.25V or 6V, 3A	Yes	2-6	5-18	38g	59*27*12
60A	Platinum-60A	60A	90A	Switch	5.25V or 6V, 3A	Yes	2-6	5-18	68g	70*34*16
80A	Platinum-80A	80A	120A	Swicth	5.25V or 6V, 3A	Yes	2-6	5-18	77g	70*34*16
100A	Platinum-100A	100A	150A	Switch	5.25V or 6V, 3A	Yes	2-6	5-18	82g	70*34*16
150A	Platinum-150A-OPTO	150A	220A	None	None	Yes	2-6	5-18	125g	88*55*15
High Voltage ESC?Supports 5 to 12 Cells Lipo)
50A	Platinum-50A-HV	50A	75A	None	None	Yes	5-12	15-36	68g	70*34*16
70A	Platinum-70A-HV	70A	105A	None	None	Yes	5-12	15-36	82g	70*34*16
100A	Platinum-100A-HV	100A	150A	None	None	Yes	5-12	15-36	123g	88*55*15
120A	Platinum-120A-HV	120A	180A	None	None	Yes	5-12	15-36	125g	88*55*15

*This ESC is OPTO version and does not have BEC output, which means you need a separate RX battery pack or external BEC unit to power the receiver and servos.

Includes:
1 x ESC
1 x English Manual

Type: COMBO-SC-C4

Category	Type	Manufacturer Code	Motor		Motor KV	ESC		Programe Card	Application suggestion	Pinion gear
EZRUN SERIES COMBO	COMBO- B7	81030170	EZRUN-3650M 13T		3000	EZRUN-WP-60A-SL ?Water Proofing?		3-digit LED Program card	1/10 racing/buggy ?ESC Water Proofing?	No
	COMBO- B8	81030180	EZRUN-3650M 9T		4300	EZRUN-WP-60A-SL ?Water Proofing?		3-digit LED Program card	1/10 racing/buggy ?ESC Water Proofing?	No
	COMBO-SC-C1	81030190	EZRUN-3656 3400KV		3400	EZRUN-WP-SC8 ?Water Proofing?		3-digit LED Program card	1/10 Short truck/big wheel/truck ?ESC Water Proofing?	No
	COMBO-SC-C2	81030200	EZRUN-3656 4000KV		4000	EZRUN-WP-SC8 ?Water Proofing?		3-digit LED Program card	1/10 Short truck/big wheel/truck ?ESC Water Proofing?	No
	COMBO-SC-C3	81030210	EZRUN-3656 4700KV		4700	EZRUN-WP-SC8 ?Water Proofing?		3-digit LED Program card	1/10 Short truck/big wheel/truck ?ESC Water Proofing?	No
	COMBO-SC-C4	81030220	4274-Lite 2000KV		2000	EZRUN-WP-SC8 ?Water Proofing?		3-digit LED Program card	1/8 short truck/buggy /racing ?ESC Water Proofing?	No

Includes:
1 x ESC
1 x brushless motor
1 x program card for ESC
1 x Instruction manual (English)

Type: COMBO-SC-C3

Category	Type	Manufacturer Code	Motor		Motor KV	ESC		Programe Card	Application suggestion	Pinion gear
EZRUN SERIES COMBO	COMBO- B7	81030170	EZRUN-3650M 13T		3000	EZRUN-WP-60A-SL ?Water Proofing?		3-digit LED Program card	1/10 racing/buggy ?ESC Water Proofing?	No
	COMBO- B8	81030180	EZRUN-3650M 9T		4300	EZRUN-WP-60A-SL ?Water Proofing?		3-digit LED Program card	1/10 racing/buggy ?ESC Water Proofing?	No
	COMBO-SC-C1	81030190	EZRUN-3656 3400KV		3400	EZRUN-WP-SC8 ?Water Proofing?		3-digit LED Program card	1/10 Short truck/big wheel/truck ?ESC Water Proofing?	No
	COMBO-SC-C2	81030200	EZRUN-3656 4000KV		4000	EZRUN-WP-SC8 ?Water Proofing?		3-digit LED Program card	1/10 Short truck/big wheel/truck ?ESC Water Proofing?	No
	COMBO-SC-C3	81030210	EZRUN-3656 4700KV		4700	EZRUN-WP-SC8 ?Water Proofing?		3-digit LED Program card	1/10 Short truck/big wheel/truck ?ESC Water Proofing?	No
	COMBO-SC-C4	81030220	4274-Lite 2000KV		2000	EZRUN-WP-SC8 ?Water Proofing?		3-digit LED Program card	1/8 short truck/buggy /racing ?ESC Water Proofing?	No

Includes:
1 x ESC
1 x brushless motor
1 x program card for ESC
1 x Instruction manual (English)

Type: COMBO-SC-C1

Category	Type	Manufacturer Code	Motor		Motor KV	ESC		Programe Card	Application suggestion	Pinion gear
EZRUN SERIES COMBO	COMBO- B7	81030170	EZRUN-3650M 13T		3000	EZRUN-WP-60A-SL ?Water Proofing?		3-digit LED Program card	1/10 racing/buggy ?ESC Water Proofing?	No
	COMBO- B8	81030180	EZRUN-3650M 9T		4300	EZRUN-WP-60A-SL ?Water Proofing?		3-digit LED Program card	1/10 racing/buggy ?ESC Water Proofing?	No
	COMBO-SC-C1	81030190	EZRUN-3656 3400KV		3400	EZRUN-WP-SC8 ?Water Proofing?		3-digit LED Program card	1/10 Short truck/big wheel/truck ?ESC Water Proofing?	No
	COMBO-SC-C2	81030200	EZRUN-3656 4000KV		4000	EZRUN-WP-SC8 ?Water Proofing?		3-digit LED Program card	1/10 Short truck/big wheel/truck ?ESC Water Proofing?	No
	COMBO-SC-C3	81030210	EZRUN-3656 4700KV		4700	EZRUN-WP-SC8 ?Water Proofing?		3-digit LED Program card	1/10 Short truck/big wheel/truck ?ESC Water Proofing?	No
	COMBO-SC-C4	81030220	4274-Lite 2000KV		2000	EZRUN-WP-SC8 ?Water Proofing?		3-digit LED Program card	1/8 short truck/buggy /racing ?ESC Water Proofing?	No

Includes:
1 x ESC
1 x brushless motor
1 x program card for ESC
1 x Instruction manual (English)

Type: COMBO-SC-C2

Category	Type	Manufacturer Code	Motor		Motor KV	ESC		Programe Card	Application suggestion	Pinion gear
EZRUN SERIES COMBO	COMBO- B7	81030170	EZRUN-3650M 13T		3000	EZRUN-WP-60A-SL ?Water Proofing?		3-digit LED Program card	1/10 racing/buggy ?ESC Water Proofing?	No
	COMBO- B8	81030180	EZRUN-3650M 9T		4300	EZRUN-WP-60A-SL ?Water Proofing?		3-digit LED Program card	1/10 racing/buggy ?ESC Water Proofing?	No
	COMBO-SC-C1	81030190	EZRUN-3656 3400KV		3400	EZRUN-WP-SC8 ?Water Proofing?		3-digit LED Program card	1/10 Short truck/big wheel/truck ?ESC Water Proofing?	No
	COMBO-SC-C2	81030200	EZRUN-3656 4000KV		4000	EZRUN-WP-SC8 ?Water Proofing?		3-digit LED Program card	1/10 Short truck/big wheel/truck ?ESC Water Proofing?	No
	COMBO-SC-C3	81030210	EZRUN-3656 4700KV		4700	EZRUN-WP-SC8 ?Water Proofing?		3-digit LED Program card	1/10 Short truck/big wheel/truck ?ESC Water Proofing?	No
	COMBO-SC-C4	81030220	4274-Lite 2000KV		2000	EZRUN-WP-SC8 ?Water Proofing?		3-digit LED Program card	1/8 short truck/buggy /racing ?ESC Water Proofing?	No

Includes:
1 x ESC
1 x brushless motor
1 x program card for ESC
1 x Instruction manual (English)

1 Specification

Includes:
1 x ESC

1 Specification of The ESC

Includes/Requires:

1 Specification of The ESC

eZRun-18A-SL: 0.01 Ohm

Includes/Requires:

This combo is specially designed for 1/10 and 1/12 scale ON-ROAD car.

Main applications:
1) R/C enthusiasts to upgrade to brushless and experience incredible power and starting torque, minimal maintenace and longer runtimes;
2) "RTR" (Ready To Run) applications for manufacturers;
3) Club race for stock equipments (Same controllers and/or same motors) ;

The Combo includes the following items:

eZRun-35A-SL brushless ESC: 1pcs
9T /10T /12T / 13T sensorless brushless motor: 1pcs
Program card for car ESC: 1pcs
Cooling fan: 1pcs

1 Specification of The ESC

* The speed controller and program card in the combo are V2 since 29/06/2009.

Includes:
1 x ESC
1 x ESC colling fan (pre-installed)
1 x brushless motor
1 x program card for ESC
1 x Instruction manual (English)

* The speed controller and program card in the combo are V2 since 29/06/2009.

Includes:
1 x ESC
1 x ESC colling fan (pre-installed)
1 x brushless motor
1 x program card for ESC
1 x Instruction manual (English)

* The speed controller and program card in the combo are V2 since 29/06/2009.

Includes:
1 x ESC
1 x ESC colling fan (pre-installed)
1 x brushless motor
1 x program card for ESC
1 x Instruction manual (English)

1 Integrated and compact design, very suitable for short course trucks and buggies.
2 The built-in switching mode BEC of EZRUN-SC8 ESC has a powerful output to supply all electronic equipments even with 4S Lipo input.
3 Excellent start-up, acceleration and linearity features.
4 With 3 running modes: Racing mode (Forward), Forward/Backward mode and Rock Crawler mode.
5 With 4 steps of maximum reverse force adjustment.
6 Proportional ABS brake function with 5 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
7 Compatible with mechanical disc-brake system.
8 With 9 start modes (Also called "Punch" ) from "Soft" to "Very aggressive" to suitable for different tracks.
9 Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
10 With 8 steps of timing adjustment to get the best compatibility with various of motors.
11 Easily program with only one button and compatible with pocket-sized LED Program Card and the Advanced LCD Program Box.
12 ESC firmware updatable via an USB adapter on the Advanced LCD Program Box.
13 The major electronic components are sealed against splashing water and dust.
14 2 mounting holes on the bottom are helpful for firmly installing the ESC on the chassis.

4 Programmable Items (Click the following picture to enlarge it)

1.1 Output:
EZRUN-SC10 ESC: Continuous current 70A, burst current 520A;

1.2 Input:
EZRUN-SC10 ESC: 6-9 cells NiMH/NiCd or 2-3S Lipo;

1.3 BEC Output: Note1
EZRUN-SC10 ESC: 6V/3A (Linear mode);

1.4 Resistance:
EZRUN-SC10 ESC: 0.0007 Ohm;

1.5 Motor Supported: Sensorless Brushless Motor
1.6 Suitable Brushless Motor:
EZRUN-SC10 ESC:
With 6 cells NiMH/NiCd or 2S Lipo: KV≤6000;
With 7-9 cells NiMH/NiCd or 3S Lipo: KV≤4000;

1.7 Suitable Car:
EZRUN-SC10 ESC: 1/10th scale 2WD short course truck / buggy / monster;

1.8 Size: 53.5mm(L) * 36mm(W) * 36mm(H).
1.9 Weight:
EZRUN-SC10 ESC: 88g;

Note1: The cooling fan of EZRUN-SC10 and EZRUN-SC8 is powered by the built-in BEC of 6V.

Includes:
1 x ESC EZRUN-SC10
1 x brushless motor EZRUN-3655
1 x LED Program Card