3pcs/bag for the package deal

Including:
Dual Rudder Tray 1pcs
5.0in Rudder Arm (other three available sizes: 3.5", 4.0" and 4.5")
Titanium Push Rod 4pcs
M3x16mm Screw 8pcs
M3 Lock Nut 8pcs
ST3 Cross Head Screw 8pcs
Features:
The rudder mount has two bearings inside. It makes the movement smoothly and precisely.
The Rudder tray can be used for all branded servos, including Futaba, Hitec and JR, etc

Pro version (metal servo arm)

Pro version (metal servo arm)

Specification:

Input Voltage: 2-6S Lipo Battery
Dimension : 6 x33.4x10.7mm
Weight: 22g

Product Info:

For the real time display of the RC model battery voltage, lowest voltage record, the set up of the low voltage alarm while flying and test the rotational speed of propeller.
High precision display of individual cell voltage (1-6S shows separately) and the total voltage.
With the special LCD screen which can indicate data clearly.
With the reverse polarity protection for cell input.
It can set up the range of LiPo / LiFe alarm voltage.

Inclusive:

1 x analyzer
1 x buzzer
1 x Power extention wire
1 x rotational speed sensor
1 x instruction manual

Servo tester with LED from G.T. Power with four servo interface sets, cam test up to four servos at the same time. Using LED digital tube, can monitor the real-time pulse width. Support manual and automatic servo test modes.

Features

• Dual mode - Manual and Auto
  
• Manual mode: to check servo speed and reaction time
  
• Automatic mode: drives the servo through its full travel from end-point to end-point (like windscreen wipers)
  
• 1-4 servos may be connected simultaneously
  
• 1-4 ESCs may be connected simultaneously to test and compare their reaction time respectively
  
• 3-digit LED display

Specification

• Input voltage: 4.8 - 6V
  
• Pulse width manual mode: 700 - 2300ms
  
• Pulse width auto mode: 800 - 2200ms
  
• Dimensions: 73.5 x 43.5 x 22.5mm
  
• Weight: 68.9g

Package includes:

• 1 x GT Power LED Servo Tester

MIRACLE New Aluminium Alloy Heavy Duty Servo Horn-full Arm for Futaba 3.5

MIRACLE New Aluminium Alloy Heavy Duty Servo Horn-full Arm for Futaba 2.5

New Aluminium Alloy Heavy Duty Servo Horn-full Arm for JR 2.5

MIRACLE High Quality Servo Single Standard Arm for JR 1.75

MIRACLE High Quality Servo Single Standard Arm for Futaba 2

MIRACLE High Quality Servo Single Standard Arm for Hitec 2

MIRACLE High Quality Servo Single Standard Arm for Futaba 1.75

MIRACLE High Quality Servo Single Standard Arm for Hitec 1.75

MIRACLE High Quality Servo Half Standard Arm for Hitec 1.5

High Quality Servo Half Standard Arm for Futaba 1.25

MIRACLE High Quality Servo Half Standard Arm for Futaba 1.5

MIRACLE High Quality Servo Half Standard Arm for Hitec 1.25

High Quality Servo DoubleStandard Arm for Hitec 3.5

High Quality Servo Double Standard Arm for JR 2.5

High Quality Servo Double Standard Arm for Hitec 2.5

High Quality Servo Double Standard Arm for Futaba 3.5

High Quality Servo Double Standard Arm for Futaba 2.5

Features:
The rudder mount has two bearings inside. It makes the movement smoothly and precisely.
Include:
Rudder Tray
5.0" Rudder Arm (other available size: 3.5", 4.5'' rudder arms for reference)
Titanium pushrod 2pcs
M3x16 screw 4pcs
M3 locknut 4pcs
ST3 Cross head screw 4pcs

Features:
The rudder mount has two bearings inside. It makes the movement smoothly and precisely.
Include:
Rudder Tray
4.5" Rudder Arm (other available size: 3.5", 5'' rudder arms for reference)
Titanium pushrod 2pcs
M3x16 screw 4pcs
M3 locknut 4pcs
ST3 Cross head screw 4pcs

Features:
The rudder mount has two bearings inside. It makes the movement smoothly and precisely.
Include:
Rudder Tray
3.5" Rudder Arm (other available size: 4.5", 5'' rudder arms for reference)
Titanium pushrod 2pcs
M3x16 screw 4pcs
M3 locknut 4pcs
ST3 Cross head screw 4pcs

Including:
Triple Rudder Tray 1pcs
5.0in Rudder Arm (other three available sizes: 3.5", 4.0" and 4.5")
Titanium Push Rod 6pcs
M3x16mm Screw 12pcs
M3 Lock Nut 12pcs
ST3 Cross Head Screw 12pcs
Features:
The rudder mount has two bearings inside. It makes the movement smoothly and precisely.
The Rudder tray can be used for all branded servos, including Futaba, Hitec and JR, etc.

Including:
Triple Rudder Tray 1pcs
4.5in Rudder Arm (other three available sizes: 3.5", 4.0" and 5.0")
Titanium Push Rod 6pcs
M3x16mm Screw 12pcs
M3 Lock Nut 12pcs
ST3 Cross Head Screw 12pcs
Features:
The rudder mount has two bearings inside. It makes the movement smoothly and precisely.
The Rudder tray can be used for all branded servos, including Futaba, Hitec and JR, etc.

Including:
Triple Rudder Tray 1pcs
4.0in Rudder Arm (other three available sizes: 3.5", 4.5" and 5.0")
Titanium Push Rod 6pcs
M3x16mm Screw 12pcs
M3 Lock Nut 12pcs
ST3 Cross Head Screw 12pcs
Features:
The rudder mount has two bearings inside. It makes the movement smoothly and precisely.
The Rudder tray can be used for all branded servos, including Futaba, Hitec and JR, etc.

Including:
Triple Rudder Tray 1pcs
3.5in Rudder Arm (other three available sizes: 4.0", 4.5" and 5.0")
Titanium Push Rod 6pcs
M3x16mm Screw 12pcs
M3 Lock Nut 12pcs
ST3 Cross Head Screw 12pcs
Features:
The rudder mount has two bearings inside. It makes the movement smoothly and precisely.
The Rudder tray can be used for all branded servos, including Futaba, Hitec and JR, etc.

Servo Single Arm for Futaba 1.5 Heavy Duty

Including the Following Parts:
1pcs* Glass Fiber Servo Arm----used to lengthen the arm of force of rudder
4pcs*Ball Head----connect to servo arm with 2pcs, link to rudder with 2 piece
4pcs*Sheep Eye Socket----link with Ball head
2M*1mm Stainless Steel Wire----connect servo arm and rudder
4 set*Adjustment----fixed the steel wire
M4*8 Nickel Plated Screw Rod
2pcs*M4 Aluminum Alloy Nut----Mount the M4 rod
2pcs* U Clip----Connect M4 rod and ball head
2pcs*M2.5*16 Phillips screws with washer
2pcs*M2.5 Self-Locking Nut
2pcs*M2.5*12 Countersunk Head Screw----connect Ball head and U clip
2pcs*M2.5 Nut---- connect Ball head and U clip
4pcs*M2*6 Screw----fix the glass fiber servo arm and servo plate
4pcs*M2 Nut----fix the glass fiber servo arm and servo plate

Plug-in Fiberglass Rudder Control Horn set 3 1.5 17.515 L

Heavy Duty Servo Arm for HiTec(Double)/for 30-50cc plane

MIRACLE New Aluminium Alloy Heavy Duty Servo Horn-full Arm for Hitec 2.5

MIRACLE Servo Arm with ball linkage assemblely for Hitec 24T*3*L54mm

MIRACLE
Features:
The NEW servo arm is designed with two sizes: 1.75in & 2.0in.
Aluminum alloy filled in servo arm, CNC processed, anodized and polished shining on the surface.
This servo arm is coming with 24 teeth, compatible with Hitec servo.

MIRACLE
Features:
The NEW servo arm is designed with two sizes: 1.75in & 2.0in.
Aluminum alloy filled in servo arm, CNC processed, anodized and polished shining on the surface.
This servo arm is coming with 23 teeth, compatible with JR servo.

MIRACLE
Features:
The NEW servo arm is designed with two sizes: 1.25in and 1.5in.
Aluminum alloy filled in servo arm, CNC processed, anodized and polished shining on the surface.
This servo arm is coming with 25 teeth, compatible with Futaba servo.

MIRACLE
Features:
The NEW servo arm is designed with two sizes: 1.25in and 1.5in.
Aluminum alloy filled in servo arm, CNC processed, anodized and polished shining on the surface.
This servo arm is coming with 24 teeth, compatible with Hitec servo.

MIRACLE
Features:
The NEW servo arm is designed with two sizes: 1.25in and 1.5in.
Aluminum alloy filled in servo arm, CNC processed, anodized and polished shining on the surface.
This servo arm is coming with 23 teeth, compatible with JR servo.

MIRACLE New Aluminium Alloy Heavy Duty Servo Horn-full Arm for JR 3.5

MIRACLE New Aluminium Alloy Heavy Duty Servo Horn-full Arm for Hitec 3.5

GT Power Professional Servo Tester.


Features

• Fully electronic for the most accurate, consistent testing
  
• High-contract LCD screen and large rotary knob for easy, simple programming
  
• Equipped with servo and receiver wires
  
• Can be powered via the balance connector of a 2S lipo battery or via the 7.4v~12v DC input with the included leads
  
• 4.8 volt output
  • This product totally have 7 functions:
    
  • Test the linearity ,vibration point of ESC;
    
  • Test the endurance of Servo;
    
  • Test the servo's ability to neutral itself;
    
  • Test the dead band of servo; test the ageing and life of the servo;
    
  • Test the output pulse of connector and have a function to perform speed test for servo.

Specification

• Dimensions: 96*70*17.5mm
  
• Input Power: JST (2S Li-Po Battery) / 7.4 - 12V DC

Package includes:

• 1 x GT Power Professional Servo Tester

High Quality Servo Single Standard Arm for JR 2

Features
Fail Safe on/off
Direction of rotation
Resolution Setup (G2 Hitec Servos Only)
Travel Speed
Center, End and Fail Safe Point
Dead Band Width
OLP Rate (Overload Protection Rate, G2
Hitec Servos)
Save and Open File Options
Reset Servo to Factory Default Program
Product Details
The HPP21 will program the following
Features of these Hitec digital servos:
All HS7XXX G2 servos: Fully programmable, including OLP Rate and high resolution adjustments.
Some HS5XXX
types servos: Fully programmable Feather and Micro Digital servos including OLP Rate; excluding high resolution adjustment function (HS5055, 5056, 5082, 5085)
Other HS5XXX type servos:
All Features are programmable except OLP
Rate and high resolution
adjustment functions.

Features:

There are two screws designed to hold the arm more secure to the servo shaft.
Specifications:

Hitec Standard 24T CNC Aluminum Single Side Arm - Black
Overall length: 35.5mm
Mounting holes spacing: at 9, 19, 24 mm (approx.) from center of the arm
the outter two holes are threaded.
* Fits the Hitec servos with splined output shafts.

Features:

There are two screws designed to hold the arm more secure to the servo shaft.
Specifications:

Hitec Standard 24T CNC Aluminum Single Side Arm - Titanium color
Overall length: 35.5mm
Mounting holes spacing: at 9, 19, 24 mm (approx.) from center of the arm
the outter two holes are threaded.
* Fits the Hitec servos with splined output shafts.

MIRACLE Heavy Duty Servo Arm for Futaba(Double) / for 30-50cc plane

MIRACLE Heavy Duty Servo Arm for Futaba(Single) /for 30-50cc plane

Specifications:
Material: carbon fiber
L1=42.7mm
W=22.4mm
L2=53mm
L3=122mm
L4=190mm
Package Contents:
Rudder Tray: L197*38mm, 1pcs
Carbon Fiber Servo Arm: L60*24mm, 1pcs; L92*27mm, 1pcs; L112*33mm, 1pcs
Aluminum Bearing Mount: D25*H18mm
Aluminum Stick: D5*H16mm
Aluminum Round Servo Plate: D25*3mm
Bearing: D11mm
Stainless Steel Push Rod: L38mm
Standard Bearing Head: D3*28mmConnecting Rod: L23mm
Flat Screw: K2.5*6mm (black)
Set Screw: PWA2.3*12mm
Nut: M2
Machine Screw A# with Wash: PM3*6mm
Machine Screw: PM2*8mm
Nylon Nut: M3
Washer: D7*d3mm
Taper Washer: D3mm (copper)
Machine Screw with Wash: PM3*14mm

Package Contents:
Rudder Tray: L121*38mm, 1pcs
Carbon Fiber Servo Arm: L60*24mm, 1pcs; L112*33mm, 1pcs
Aluminum Bearing Mount: D25*H18mm
Aluminum Stick: D5*H16mm
Aluminum Round Servo Plate: D25*3mm
Bearing: D11mm
Stainless Steel Push Rod: L38mm
Standard Bearing Head: D3*28mm
Connecting Rod: L23mm
Flat Screw: K2.5*6mm (black)
Set Screw: PWA2.3*12mm
Nut: M2
Machine Screw A# with Wash: PM3*6mm
Machine Screw: PM2*8mm
Nylon Nut: M3
Washer: D7*d3mm
Taper Washer: D3mm (copper)
Machine Screw with Wash: PM3*14mm

MIRACLE Heavy Duty Servo Arm for HiTec (Single) /for 30-50cc plane

Heavy Duty Servo Arm for JR (Double)/for 30-50cc plane

MIRACLE Heavy Duty Servo Arm for JR (Single) /for 30-50cc plane

High Quality 1 Servo Half Standard Arm for FUTABA

High Quality 1 Servo Half Standard Arm for Hitec

Including:
Dual Rudder Tray 1pcs
4.0in Rudder Arm (other three available sizes: 3.5", 4.5" and 5")
Titanium Push Rod 4pcs
M3x16mm Screw 8pcs
M3 Lock Nut 8pcs
ST3 Cross Head Screw 8pcs
Features:
The rudder mount has two bearings inside. It makes the movement smoothly and precisely.
The Rudder tray can be used for all branded servos, including Futaba, Hitec and JR, etc.

Including:
Rudder Tray 1pcs
4.0in Rudder Arm (other three available sizes: 3.5", 4.5" and 5")
Titanium Push Rod 2pcs
M3x16mm Screw 4pcs
M3 Lock Nut 4pcs
ST3 Cross Head Screw 4pcs
Features:
The rudder mount has two bearings inside. It makes the movement smoothly and precisely.
The Rudder tray can be used for all branded servos, including Futaba, Hitec and JR, etc.

High Quality 1 Servo Half Standard Arm for JR

Including:
Dual Rudder Tray 1pcs
4.5in Rudder Arm (other three available sizes: 3.5", 4.0" and 5")
Titanium Push Rod 4pcs
M3x16mm Screw 8pcs
M3 Lock Nut 8pcs
ST3 Cross Head Screw 8pcs
Features:
The rudder mount has two bearings inside. It makes the movement smoothly and precisely.
The Rudder tray can be used for all branded servos, including Futaba, Hitec and JR, etc

Including:
Dual Rudder Tray 1pcs
3.5in Rudder Arm (other three available sizes: 4.0", 4.5" and 5")
Titanium Push Rod 4pcs
M3x16mm Screw 8pcs
M3 Lock Nut 8pcs
ST3 Cross Head Screw 8pcs
Features:
The rudder mount has two bearings inside. It makes the movement smoothly and precisely.
The Rudder tray can be used for all branded servos, including Futaba, Hitec and JR, etc

GT Power Professional Servo Tester.


Features

• Fully electronic for the most accurate, consistent testing
  
• High-contract LCD screen and large rotary knob for easy, simple programming
  
• Equipped with servo and receiver wires
  
• Can be powered via the balance connector of a 2S lipo battery or via the 7.4v~12v DC input with the included leads
  
• 4.8 volt output
  • This product totally have 7 functions:
    
  • Test the linearity ,vibration point of ESC;
    
  • Test the endurance of Servo;
    
  • Test the servo's ability to neutral itself;
    
  • Test the dead band of servo; test the ageing and life of the servo;
    
  • Test the output pulse of connector and have a function to perform speed test for servo.

Specification

• Dimensions: 96*70*17.5mm
  
• Input Power: JST (2S Li-Po Battery) / 7.4 - 12V DC

Package includes:

• 1 x GT Power Professional Servo Tester

Carbon fiber arms W24L32H2mm

Carbon fiber arms L52H1.5mm

Carbon fiber arms L110H1.5mm

Glass Fiber Rudder Arm

Fiberglass Double Serm Arm D43 2 L100mm

Fiberglass Single Servo Arm 28 L60 2mm

Epoxy Board Servo Arm sets for 50cc plane

Epoxy Board Servo Arm sets for 100cc plane

Carbon Fiber Board Servo Arm Set for 50cc plane

Carbon Fiber Board Servo Arm Set for 100cc plane

Carbon fiber arms W24L35H2mm

Carbon fiber arms 9 L40 W21 H2mm

Carbon fiber arms 8 L65 W21 H2mm

Carbon fiber arms 9 L58 W21 H2mm

Carbon fiber arms 9 L108 W21 H2mm

Features:

Servo Arm: carbon fiber material
Length of Servo Arm: 50MM
Net Weight: 8g
Servo Plate: aluminum alloy, CNC Processed, Silver
Application Fields:
Servo Plate: the servo plate is suitable for JR Series Servo, SANWAN Series Servo, Servo with 23T Spline Horn
Servo Plate with Servo Arm: suitable for 50-80cc gasoline airplane
Kindly Remark: The servo plate is only suitable for s

Features:

Servo Arm: carbon fiber material
Length of Servo Arm: 50MM
Net Weight: 8g
Servo Plate: aluminum alloy, CNC Processed, Blue
Application Fields:
Servo Plate: suitable for HITEC series servo, Servo with 24T Spline Horn
Servo Plate with Servo Arm: suitable for 50-80cc gasoline airplane
Kindly Remark: The servo plate is only suitable for servo with the above standard spline horn, instead of mini servo or large servo.

Features:

Servo Arm: carbon fiber material
Length of Servo Arm: 50MM
Net Weight: 8g
Servo Plate: aluminum alloy, CNC Processed, Red
Application Fields:
Servo Plate: suitable for Futaba, Tower Pro Series Servos, Servo with 25T Spline Horn
Servo Plate with Servo Arm: suitable for 50-80cc gasoline airplane
Kindly Remark: The servo plate is only suitable for servo with the above standard spline horn, instead of mini servo or large servo.

Features:

Servo Arm: carbon fiber material
Length of Servo Arm: 60MM
Net Weight: 8g
Servo Plate: aluminum alloy, CNC Processed, Silver
Application Fields:
Servo Plate: Suitable for JR Series Servo, SANWAN Series Servo, Servo with 23T Spline Horn.
Servo Plate with Servo Arm: Suitable for 80-120cc gasoline airplane
Kindly Remark: The servo plate is suitable for servo with the above standard spline horn, instead of mini servo and large servo.

Features:

Servo Arm: carbon fiber material
Length of Servo Arm: 60MM
Net Weight: 8g
Servo Plate: aluminum alloy, CNC Processed, Blue
Application Fields:
Servo Plate: suitable for Hitec Series Servo, Servo with 24T Spline Horn.
Servo Plate with Servo Arm: Suitable for 80-120cc gasoline airplane
Kindly Remark: The servo plate is suitable for servo with the above standard spline horn, instead of mini servo and large servo.

Features:
Servo Arm: carbon fiber material
Length of Servo Arm: 60MM
Net Weight: 8g
Servo Plate: aluminum alloy, CNC Processed, Red
Application Fields:
Servo Plate: Suitable for Futaba, Tower Pro Series Servo, and Servo with 25T Spline Horn.
Servo Plate with Servo Arm: Suitable for 80-120cc gasoline airplane
Kindly Remark: The servo plate is only suitable for servo with the above standard spline horn, instead of mini servo or large servo.

Features:
Servo Arm: carbon fiber material
Length of Servo Arm: 60MM
Net Weight: 8g
Servo Plate: aluminum alloy, CNC Processed, Blue
Application Fields:
Servo Plate: suitable for Hitec Series Servo, Servo with 24T Spline Horn.
Servo Plate with Servo Arm: Suitable for 80-120cc gasoline airplane
Kindly Remark: The servo plate is only suitable for servo with the above standard spline horn, instead of mini servo or large servo.

Features:
Servo Arm: carbon fiber material
Length of Servo Arm: 60MM
Net Weight: 8g
Servo Plate: aluminum alloy, CNC Processed, Red
Application Fields:
Servo Plate: Suitable for Futaba, Tower Pro Series Servo and Servo with 25T Spline Horn.
Servo Plate with Servo Arm: Suitable for 80-120cc gasoline airplane
Kindly Remark: The servo plate is only suitable for servo with the above standard spline horn, instead of mini servo or large servo.

Features:

Servo Arm: carbon fiber material
Length of Servo Arm: 60MM
Net Weight: 8g
Servo Plate: aluminum alloy, CNC Processed, Silver
Application Fields:
Servo Plate: Suitable for JR Series Servo, SANWAN Series Servo, and Servo with 23T Spline Horn.
Servo Plate with Servo Arm: Suitable for 80-120cc gasoline airplane
Kindly Remark: The servo plate is suitable

Features:
Servo Arm: carbon fiber material
Length of Servo Arm: 50MM
Net Weight: 8g
Servo Plate: aluminum alloy, CNC Processed, Red
Application Fields:
Servo Plate: the servo plate is suitable for Futaba, Tower Pro Series Servos, Servo with 25T Spline Horn
Servo Plate with Servo Arm: suitable for 50-80cc gasoline airplane
Kindly Remark: The servo plate is only suitable for servo with the above standard spline horn, instead of mini servo or large servo.

25T Aluminum Servo Arm Single for Futaba 25T??3??L20/L25--Black Color

25T Aluminum Servo Arm Single for Futaba 25T??3??L20/L25--Blue Color

25T Aluminum Servo Arm Single for Futaba 25T??3??L20/L25--Yellow Color

24T Aluminum Servo Arm Single for Hitec 24T*3*L38mm--Blue Color

24T Aluminum Servo Arm Single for Hitec 24T* ^3*L32mm--Orang

24T Aluminum Servo Arm Single for Hitec 24T*3*L32mm--Blue Color

24T Aluminum Servo Arm Single for Hitec 24T*3*L27mm--Orange Color

24T Aluminum Servo Arm Single for Hitec 24T*3*L27mm--Blue Color

24T Aluminum Servo Arm Single for Hitec 24T*3*L38mm--Orang

Features:
Servo Arm: carbon fiber material
Length of Servo Arm: 130MM
Net Weight: 12g
Servo Plate: Made of Aluminum Alloy, CNC Processed, Red
Application Fields:
Servo Plate: suitable for Futaba, Tower Pro Series Servo, and Servo with 25T Spline Horn.
Servo Plate with Servo Arm: suitable for 50-120cc gasoline airplane
Kindly Remark: The servo plate is only suitable for servo with the above standard spline horn, instead of mini servo or large servo.