With ultra-efficient Neu brushless motors, titanium gear trains, low current consumption and constant output power, the HSB-93XX series of servos is the perfect match for the most discriminating pilots and racers.

HSB-93XX Series Comparison Chart

With ultra-efficient Neu brushless motors, titanium gear trains, low current consumption and constant output power, the HSB-93XX series of servos is the perfect match for the most discriminating pilots and racers. The HSB-9360’s speed is ideal for helicopter pilots.

Power Efficient Brushless Motor Controller
Energy efficiency is a common interest for all modelers. Our HSB-9XXX Series uses the latest control circuit technology including a regenerative braking circuit which puts power back into the battery as the motor slows. This feature, combined with ultralow current draw under sustained loads, allows our brushless servos to consume 1/5 the power of most other brushless servos on the market today

Custom NeuMotor
Designed by Steve Neu exclusively for our HSB-9XXX Series, these high performance, brushless motors provide longstanding durability and performance.

Constant Torque Output:
Thanks to our revolutionary circuit and motor designs, the HSB-9XXX Series maintain their speed in a more consistent manner, regardless of load.

Hybrid MPD 1st Gear:
Our unique ultra-durable Metal/Plastic/duralumin hybrid first gear prevents inadvertent electrical noise from affecting other components within your aircraft or vehicle.

Industry-Leading Titanium Gear Train
Hitec was the first manufacturer to utilize low wear Titanium gears in our servos and continues to be the leader in Titanium gear technology.

25-Tooth Standard Spline
Our Brushless servos utilize a standard 25 tooth output spline for maximum compatibility with the large variety of aftermarket horn available on the market these days.

Specifications

HSB-93XX Series Comparison Chart

Hitec's most technologically advanced servo, the "Monster Torque" HS-M7990TH features an ultra precise high resolution magnetic encoder instead of a conventional mechanical potentiometer. Designed to operate on a two cell LiPo Pack the HS-M7990TH features our newest high resolution "G2.5" 12 bit generation programmable digital circuit and our indestructible Titanium gears. Other features of the HS-M7990TH include a 7.4V optimized coreless motor, integrated heat sink case, and a top case with two hardened steel gear pins supported by brass axialbushings.

Featuring a coreless motor for smooth operation and faster response time, our HS-8775MG low profile, digital servo provides high resolution performance to your electric and 1/10^th scale nitro vehicles, mid to large size nitro and large scale electric helicopters. Its metal gears and dual ball bearings add to its strength and reliability. Featuring the industry standard 25-tooth output spline, the HS-8775MG is your “go to” servo.

Features

• Efficient Coreless Motor
• Strong Metal Gears
• Non-Programmable, Digital Circuitry
• Standard 25-Tooth Spline
• Low Profile Size for Tighter Installations

Specifications

Motor Type:	Coreless
Bearing Type:	Dual Ball Bearing
Speed (4.8V/6.0V):	0.12 / 0.10
Torque oz./in. (4.8V/6.0V):	100 / 125
Torque kg./cm. (4.8V/6.0V):	7.9 / 9.0
Size in Inches:	1.59 x 0.83 x 1.00
Size in Millimeters:	40.4 x 21.0 x 25.4
Weight ounces:	1.72
Weight grams:	45

Our line of high resolution, high voltage, ultra response servos keeps getting better and better with the introduction of the HS-8385TH. The impressive precision and rapid-fire response of this non-programmable, high torque titan is sure to catch the attention of all giant scale pilots. With a robust titanium gear train, smooth coreless motor, industry-standard 25-tooth spline and dead band optimized for aircraft applications, the HS-8385TH is truly the best of the best.

Features

• Durable Titanium Gears
• Non-Programmable, Digital Circuitry
• Ultra Powerful Torque
• Optimized Dead Band
• Efficient Coreless Motor
• Standard 25-Tooth Spline

Specifications

Motor Type:	Coreless
Bearing Type:	Dual Ball Bearing
Speed (6.0V/7.4V):	0.17 / 0.14
Torque oz./in. (6.0V/7.4V):	403 / 486
Torque kg./cm. (6.0V/7.4V):	29.0 / 35.0
Size in Inches:	1.57 x 0.79 x 1.50
Size in Millimeters:	39.9 x 20.0 x 38.1
Weight ounces:	2.40
Weight grams:	68

Take command of the track with our torque master servo, the HS-8380TH. Built rugged and tough with a titanium gear train, efficient coreless motor and high resolution, non-programmable digital circuits, this ultra response, high voltage servo delivers the power and force required to beat the fiercest competitors. Drivers of 1/8th scale on-road, short course, buggies, truggies, monster trucks and crawlers will relish in the revolutionary strength of the HS-8380TH. Start your engines!

Applications:
1/8th Scale Short Course Trucks, 1/8th Scale Buggies, Truggies and Monster Trucks, 1/10 - 1/8th Scale Crawlers
Note: Due to it's ultra narrow dead band this servo is not recommended for aircraft use.

Features

• High Resolution Ultra Response Non-Programmable Digital Circuit
• Efficient Coreless Motor
• Durable Titanium Gears
• 7.4v 2-Cell LiPo Capability
• Industry Standard 25 Tooth Spline (Fut. Compatible)

Specifications

Motor Type:	Coreless Metal Brush
Bearing Type:	Dual Ball Bearing
Speed (6.0V/7.4V):	0.17 / 0.14 second
Torque oz./in. (6.0V/7.4V):	403 / 486 oz-in.
Torque kg./cm. (6.0V/7.4V):	29 / 35 kg-cm
Size in Inches:	1.57" x 0.79" x 1.50"
Size in Millimeters:	40 x 20 x 38
Weight oz.:	2.4 oz.
Weight g.:	68 g.

The versatile, multipurpose functionality of the HS-8370TH will have all radio control enthusiasts clamoring for more. Robust titanium gears, ultra-efficient coreless motor, high resolution, non-programmable digital circuits make this swift, responsive servo incredibly durable and amazingly reliable. Install the HS-8370TH in everything from your 35% sport plane to your 700+ size heli to your 1/8th short course truck - no matter what application, it gets the job done.

Features

• High Resolution Ultra Response Non-Programmable Digital Circuit
• Efficient Coreless Motor
• Durable Titanium Gears
• 7.4v 2-Cell LiPo Capability
• Industry Standard 25 Tooth Spline (Fut. Compatible)

Specifications

Motor Type:	Coreless
Bearing Type:	Dual Ball Bearing
Speed (6.0V/7.4V):	0.12 / 0.10 second
Torque oz./in. (6.0V/7.4V):	250 / 319 oz-in
Torque kg./cm. (6.0V/7.4V):	13 / 16 kg-cm
Size in Inches:	1.57 x 0.79 x 1.50
Size in Millimeters:	40 x 20 x 38
Weight oz.:	2.4 oz.
Weight g.:	68 g.

Our high voltage, ultra response HS-8360TH provides the precision you need, the millisecond you need it! Designed with an efficient coreless motor, non-programmable digital circuitry and heavy-duty titanium gears, this speedy servo is the perfect answer for 600+ size helis and 1/10TH truggies, buggies, monster trucks, on-road and short course vehicles. Furiously fast and furiously cool.

Features

• High Resolution Ultra Response Non-Programmable Digital Circuit
• Efficient Coreless Motor
• Durable Titanium Gears
• 7.4v 2-Cell LiPo Capability
• Industry Standard 25 Tooth Spline (Fut. Compatible)

Specifications

Motor Type:	Coreless
Bearing Type:	Dual Ball Bearing
Speed (6.0V/7.4V):	0.07 / 0.06 seconds
Torque oz./in. (6.0V/7.4V):	181 / 222 oz-in
Torque kg./cm. (6.0V/7.4V):	13 / 16 kg-cm
Size in Inches:	1.57 x 0.79 x 1.5
Size in Millimeters:	40 x 20 x 38
Weight oz.:	2.4 oz.
Weight g.:	68 g.

Our ultra response, high voltage HS-8335SH delivers top tier performance at an economical price. Engineered with extremely durable steel gears, dual ball bearings and a highly efficient coreless motor, the HS-8335SH equips your 35% aircraft and 1/8th scale cars and trucks with commanding torque. As with all Hitec’s HS-8000 series of servos, it features a 25-tooth industry standard output spline. Powerful, reliable and strong!

Features

• High Resolution Ultra Response Non-Programmable Digital Circuit
• Efficient Coreless Motor
• Durable Steel Gears
• 7.4v 2-Cell LiPo Capability
• Industry Standard 25 Tooth Spline

Specifications

Motor Type:	Coreless
Bearing Type:	Dual Ball Bearing
Speed (6.0V/7.4V):	0.16 / 0.13 seconds
Torque oz./in. (6.0V/7.4V):	257 / 333 oz-in
Torque kg./cm. (6.0V/7.4V):	18.5 / 24.0 kg-cm
Size in Inches:	1.57 x 0.78 x 1.50
Size in Millimeters:	40 x 20 x 37
Weight oz.:	2.26 oz.
Weight g.:	64 g.

Our ultra response, high voltage HS-8330SH is a premium performance servo at an affordable price. Engineered with extremely durable steel gears, dual ball bearings and a highly efficient coreless motor, the HS-8330SH brings quick action to 500+ helicopters and 1/10th scale vehicles while providing the ultimate in servo reliability. As with all Hitec’s HS-8000 series of servos, it features a 25-tooth industry standard output spline.

Applications:
Helicopters 500+, 1/10th Scale Short Course, Trucks and Buggies and 1/10th On Road Vehicles

Features

• High Resolution Ultra Response Non-Programmable Digital Circuit
• Efficient Coreless Motor
• Durable Steel Gears
• 7.4v 2-Cell LiPo Capability
• Industry Standard 25 Tooth Spline

Specifications

Motor Type:	Coreless
Bearing Type:	Dual Ball Bearing
Speed (6.0V/7.4V):	0.09 / 0.07 seconds
Torque oz./in. (6.0V/7.4V):	139 / 181 oz-in
Torque kg./cm. (6.0V/7.4V):	10 / 13 kg-cm
Size in Inches:	1.57 x 0.78 x 1.50
Size in Millimeters:	40 x 20 x 37
Weight oz.:	2.33 oz.
Weight g.:	66 g.

Hitec's strongest servo period, the "Monster Torque" HS-7980TH is designed to operate on a two cell LiPo Pack. Featuring our newest high resolution "G2.5" 12 bit generation programmable digital circuit and our indestructible Titanium gears, The HS-7980TH has the performance and durability you've come to expect from a Hitec servo. Other features in the HS-7980TH include a 7.4V optimized coreless motor, integrated heat sink case, and a top case with two hardened steel gear pins supported by axial brass bushing.

Applications for the HS-7980TH include high performance Giant Scale Aircraft, Truggies and Buggies, Fast Power boats, the largest aircraft, monster trucks or anywhere else you can use 600+ inch ounces of torque.

Features

• G2.5 12 bit Digital Programmable Circuit
• Titanium Gear Train (MK first gear)
• Ultra Performance Coreless Motor
• Integrated Heatsink Case
• (8) O-Rings for Water/Dust/Fuel protection
• Dual Ball Bearing Supported Output Shaft
• 10% larger than a HS-7955TG

Programmable Features

• Dead Band Width
• Direction of Rotation
• Speed of Rotation (slower)
• End Points
• Neutral Points
• Fail Safe On/Off
• Fail Safe Point
• Overload Protection* (default is off)

*These features are only programmable with the HFP-20, HPP-20 or HPP-21 programmers.

Specifications

Motor Type:	Coreless
Bearing Type:	Dual Ball Bearing
Speed (6.0V/7.4V):	0.20 / 0.17
Torque oz./in. (6.0V/7.4V):	500 / 611
Torque kg./cm. (6.0V/7.4V):	38.0 / 46.0
Size in Inches:	1.72 x 0.88 x 1.57
Size in Millimeters:	43.69 x 22.35 x 39.88
Weight oz.:	2.70
Weight g.:	76.54

The HS-7954SH could be considered the most economical high voltage, high torque, coreless servo on the market. Based on the ultra popular HS-7955TG, the HS-7954SH has the added benefit of our high voltage coreless motor. With 403 inch ounce of torque at 7.4 volts, the HS-7954SH is fast too with a 0.12 second transit time when operating on a 2 cell LiPo pack. The HS-7954SH harnesses all this power by utilizing a heavy duty case that incorporates an aluminum heat sink, hardened steel gears, and two strong steel gear pins nested in brass axial bushings. Put it all together and you get one tough high voltage servo at a price that can't be beat.

Features

• G2 Digital Circuit
• HV Coreless Motor
• Dual Ball Bearing Supported Output Shaft
• Steel Gear Train (MK first gear)

Programmable Features

• Dead Band Width
• Direction of Rotation
• Speed of Rotation (slower)
• End Points
• Neutral Points
• Fail Safe On/Off
• Fail Safe Point
• Resolution* (default is high resolution)
• Overload Protection* (default is off)

*These features are only programmable with the HFP-20 field programmer.

Specifications

Motor Type:	Coreless
Bearing Type:	Dual Ball Bearing
Speed (6.0V/7.4V):	0.15 / 0.12
Torque oz./in. (6.0V/7.4V):	333 / 403
Torque kg./cm. (6.0V/7.4V):	24.0 / 29.0
Size in Inches:	1.57 x 0.78 x 1.45
Size in Millimeters:	39.88 x 19.81 x 36.83
Weight oz.:	2.30
Weight g.:	65.20

Combining high torque with high speed the HS-7945TH is Hitec's most versatile high voltage digital servo. Designed to operate on a two cell LiPo Pack, the HS-7945TH features our high resolution "G2" second generation programmable digital circuit and our indestructible Titanium gears giving you the performance and durability you've come to expect from a Hitec servo. Other features in the HS-7040TH include a 7.4V optimized coreless motor, integrated heat sink case, and a top case with two hardened steel gear pins supported by axial brass bushings.

The HS-7945TH has been designed for applications where both high speed and high torque are needed. The HS-7945TH is perfect for High Performance Aircraft, Cars, and Trucks as well as larger Nitro and Electric Helicopters.

Features

• G2 Digital Circuit
• Titanium Gear Train (MK first gear)
• Ultra Performance Coreless Motor
• Heatsink Case
• (8) O-Rings for Water/Dust/Fuel protection
• Dual Ball Bearing Supported Output Shaft

Programmable Features

• Dead Band Width
• Direction of Rotation
• Speed of Rotation (slower)
• End Points
• Neutral Points
• Fail Safe On/Off
• Fail Safe Point
• Resolution* (default is high resolution)
• Overload Protection* (default is off)

*These features are only programmable with the HFP-20, HPP-20 or HPP-21 programmers.

Specifications

Motor Type:	7.4v Wind Coreless
Bearing Type:	Dual Ball Bearing
Speed (6.0V/7.4V):	0.12 / 0.10 second @ 60°
Torque oz./in. (6.0V/7.4V):	250 / 319
Torque kg./cm. (6.0V/7.4V):	18.0 / 23.0
Size in Inches:	1.57 x 0.79 x 1.50
Size in Millimeters:	39.88 x 20.07 x 38.10
Weight oz.:	2.40
Weight g.:	68

Hitec's fastest standard size servo the "Ultra Speed" HS-7940TH is designed to operate on a two cell LiPo Pack. Featuring our high resolution "G2" second generation programmable digital circuit and our indestructible Titanium gears, The HS-7940TH has the performance and durability you've come to expect from a Hitec servo. Other features in the HS-7040TH include a 7.4V optimized coreless motor, integrated heat sink case, and a top case with two hardened steel gear pins supported by axial brass bushing.

The HS-7940TH has been designed for applications where speed and response are demanded. Perfect for High Performance Nitro and Electric Helicopters, Aircraft, Cars, and Trucks. Featuring a blistering transit time of .07 sec, but still maintaining a respectable 181 oz./in. of torque at 6.0 volts.

Features

• G2 Digital Circuit
• Titanium Gear Train (MK first gear)
• Ultra Performance Coreless Motor
• Heatsink Case
• (8) O-Rings for Water/Dust/Fuel protection
• Dual Ball Bearing Supported Output Shaft

Programmable Features

• Dead Band Width
• Direction of Rotation
• Speed of Rotation (slower)
• End Points
• Neutral Points
• Fail Safe On/Off
• Fail Safe Point
• Resolution* (default is high resolution)
• Overload Protection* (default is off)]

You can never be too rich or too thin! That's our philosophy with our new HS-7115TH Slim Wing servo: rich engineering in a thin design! The HS-7115TH will fulfill every pilot's dream when it comes to flying slim-wing aircraft. With its efficient, powerful three pole, metal-brushed motor and mighty titanium gear train, this servo brings the ultimate in high performance to your sailplanes, pylon racers and smaller scale models. The extremely thin, 8mm case with included mounting bracket allows it to fit into the tightest wings and most compact spaces. Constructed with dual ball bearings, the high voltage HS-7115TH provides an impressive 50 oz-in of torque at 7.4 volts.

Features

• Slim 8mm Design Fits in the Thinnest Wings
• Strong Three-Pole Ferrite Motor
• Durable Titanium Gears
• Dual Ball Bearing
• 7.4v 2-Cell LiPo Capability
• G2 Fully Programmable Digital Circuitry

Specifications

Motor Type:	3 Pole, Metal Brush w/Ferrite Magnets
Bearing Type:	Dual
Speed (6.0V/7.4V):	0.12 / 0.10
Torque oz./in. (6.0V/7.4V):	44 / 54 oz-in
Torque kg./cm. (6.0V/7.4V):	3.2 / 3.9 kg-cm
Size in Inches:	1.02 x 0.31 x 1.50
Size in Millimeters:	26 x 8.0 x 38 mm
Weight oz.:	0.71 oz.
Weight g.:	20 g.