THIS ENGINE WAS DESIGNED FOR UAV DRONE WITH 300-500 HOURS TBO. Product quanlity and performance are approved with two years testing in extreme condition. Engines were installed on the multirotors for military & agriculture industries. (Propeller not included)

Aviation class bearings & metal materials (7075/6061) are used to make crankshaft, piston, crankcase, cylinders etc

THIS IS NOT FOR HOBBY ENGINE 20-50 HOURS longevity

WHY HOBBY ENGINES ONLY HAVE 20-50 HOURS LIFE TIME OR 1-3 YEARS WARRANTY?

• Hobby industry does not need TBOH Over 50 Hours as 99% modellers only can fly 30 Mins Per week in average
• Cost is big concern for most modellers, so, they do not need the expensive metal material same as the one for aviation industry

THIS ENGINE HAS DIFFERENT VERSION WITH AUTO STARTER, GENERATOR, EFI, COUNTER CLOCKWISE (CCW) ROTATION FOR DRONES WITH PUSHER ENGINE. IT ALSO CAN BE USED FOR PARAGLIDER WITH DIFFERENT MUFFLER CONFIGURATION.

SPECIFICATIONS

Performance

Power: 17.5HP/7500rpm/38kg thrust (100 meter sea level)

low Idle Speed: 1100rpm

Sparking Plug: NGK CM6

Propeller: 30X12; 32X10

Weight: 5.8kg

Parameter

Displacement: 170cc

Bore X Stroke: 52mm X 40mm

Compression Ratio: 9.5: 1

Fuel Ratio: 50:1

Ignition Volt: 8.4V

12V (3S)-24V (6S) Battery for Autostarter w/wo Solenoid

Product Warranty: 300-500 Hours TBO or 5 years warranty (Conditional) Applied

THIS ENGINE WAS DESIGNED FOR UAV DRONE WITH 300-500 HOURS TBO. Product quanlity and performance are approved with two years testing in extreme conditions. Engines were installed on the multirotors for military & agriculture industries. (Propeller not included)

Aviation class bearings & metal materials (7075/6061) are used to make crankshaft, piston, crankcase, cylinders etc

THIS IS NOT FOR HOBBY ENGINE 20-50 HOURS longevity

WHY HOBBY ENGINES ONLY HAVE 20-50 HOURS LIFE TIME OR 1-3 YEARS WARRANTY?

Hobby industry does not need TBOH Over 50 Hours as 99% modellers only can fly 30 Mins Per week in average

• Cost is big concern for most modellers, so, they do not need the expensive metal material same as the one for aviation industry

THIS ENGINE HAS DIFFERENT VERSION WITH AUTO STARTER, GENERATOR, EFI, COUNTER CLOCKWISE (CCW) ROTATION FOR DRONES WITH PUSHER ENGINE. IT ALSO CAN BE USED FOR PARAGLIDER WITH DIFFERENT MUFFLER CONFIGURATION.

SPECIFICATIONS

Performance

Power: 17.5HP/7500rpm/38kg thrust (100 meter sea level)

low Idle Speed: 1100rpm

Sparking Plug: NGK CM6

Propeller: 30X12; 32X10

Weight: 5.8kg

Parameter

Displacement: 170cc

Bore X Stroke: 52mm X 40mm

Compression Ratio: 9.5: 1

Fuel Ratio: 50:1

Ignition Volt: 8.4V

12V (3S)-24V (6S) Battery for Autostarter w/wo Solenoid

Product Warranty: 300-500 Hours TBO or 5 years warranty (Conditional) Applied

THIS ENGINE WAS DESIGNED FOR UAV DRONE WITH 300-500 HOURS TBO. Product quanlity and performance are approved with two years testing in extreme condition. Engines were installed on the multirotors for military & agriculture industries. (Propeller not included)

Aviation class bearings & metal materials (7075/6061) are used to make crankshaft, piston, crankcase, cylinders etc

THIS IS NOT FOR HOBBY ENGINE 20-50 HOURS longevity

WHY HOBBY ENGINES ONLY HAVE 20-50 HOURS LIFE TIME OR 1-3 YEARS WARRANTY?

Hobby industry does not need TBOH Over 50 Hours as 99% modellers only can fly 30 Mins Per week in average and less 20 Hours/Per Year.

• Cost is big concern for most modellers, so, they do not need the expensive metal material same as the one for aviation & military industry

THIS ENGINE HAS DIFFERENT VERSION WITH AUTO STARTER, GENERATOR, EFI, COUNTER CLOCKWISE (CCW) ROTATION FOR DRONES WITH PUSHER ENGINE. IT ALSO CAN BE USED FOR PARAGLIDER WITH DIFFERENT MUFFLER CONFIGURATION.

SPECIFICATIONS

Performance

Power: 17.5HP/7500rpm/38kg thrust (100 meter sea level)

low Idle Speed: 1100rpm

Sparking Plug: NGK CM6

Propeller: 30X12; 32X10

Weight: 5.8kg

Parameter

Displacement: 170cc

Bore X Stroke: 52mm X 40mm

Compression Ratio: 9.5: 1

Fuel Ratio: 50:1

Ignition Volt: 8.4V

12V (3S Lipo)-24V (6S Lipo) for Autostarter w/wo Solenoid

Product Warranty: 300-500 Hours TBO or 5 years warranty (Conditional) Applied

THIS EFI VERSION ENGINE WAS DESIGNED FOR UAV DRONE WITH 300-500 HOURS TBO. Product quanlity and performance are approved with two years testing in extreme condition. Engines were installed on the multirotors for military & agriculture industries applications. (Propeller not included). With CCW rotation, more options to select propellers on the market to pull or push the aircraft.

Package system with UAV170 EFI CCW/CW Engines & autopilot (Flight Controller) and Propellers otpional (Contact Teamaustars) for Multirotor Petrol/Gas engine version.

Aviation class bearings & metal materials (7075/6061) are used to make crankshaft, piston, crankcase, cylinders etc

THIS IS NOT FOR HOBBY ENGINE 20-50 HOURS longevity

WHY HOBBY ENGINES ONLY HAVE 20-50 HOURS LIFE TIME OR 1-3 YEARS WARRANTY?

• Hobby industry does not need TBOH Over 50 Hours as 99% modellers only can fly 30 Mins Per week in average
• Cost is big concern for most modellers, so, they do not need the expensive metal material same as the one for aviation industry

THIS ENGINE HAS DIFFERENT VERSION WITH AUTO STARTER, GENERATOR, EFI, COUNTER CLOCKWISE (CCW) ROTATION FOR DRONES WITH PUSHER ENGINE. IT ALSO CAN BE USED FOR PARAGLIDER WITH DIFFERENT MUFFLER CONFIGURATION.

SPECIFICATIONS

Performance

Power: 17.5HP/7500rpm/38kg thrust (100 meter sea level)

low Idle Speed: 1100rpm

Sparking Plug: NGK CM6

Propeller: 30X12; 32X10

Weight: 5.9kg

Parameter

Displacement: 170cc

Bore X Stroke: 52mm X 40mm

Compression Ratio: 9.5: 1

Fuel Ratio: 50:1

Ignition Volt: 8.4V

Voltage for Autostarter: 24V (6S Lipo) without Solenoid or 12V (3S Lipo) W/Solenoid

Product Warranty: 300-500 Hours TBO or 5 years warranty (Conditional) Applied

THIS EFI VERSION ENGINE WAS DESIGNED FOR UAV DRONE WITH 300-500 HOURS TBO. Product quanlity and performance are approved with two years testing in extreme condition. Engines were installed on the multirotors for military & agriculture industries applications. (Propeller not included). With CCW rotation, more options to select propellers on the market to pull or push the aircraft.

Package system with UAV170 EFI CCW/CW Engines & autopilot (Flight Controller) and Propellers otpional (Contact Teamaustars) for Multirotor Petrol/Gas engine version.

Aviation class bearings & metal materials (7075/6061) are used to make crankshaft, piston, crankcase, cylinders etc

THIS IS NOT FOR HOBBY ENGINE 20-50 HOURS longevity

WHY HOBBY ENGINES ONLY HAVE 20-50 HOURS LIFE TIME OR 1-3 YEARS WARRANTY?

• Hobby industry does not need TBOH Over 50 Hours as 99% modellers only can fly 30 Mins Per week in average
• Cost is big concern for most modellers, so, they do not need the expensive metal material same as the one for aviation industry

THIS ENGINE HAS DIFFERENT VERSION WITH AUTO STARTER, GENERATOR, EFI, COUNTER CLOCKWISE (CCW) ROTATION FOR DRONES WITH PUSHER ENGINE. IT ALSO CAN BE USED FOR PARAGLIDER WITH DIFFERENT MUFFLER CONFIGURATION.

SPECIFICATIONS

Performance

Power: 17.5HP/7500rpm/38kg thrust (100 meter sea level)

low Idle Speed: 1100rpm

Sparking Plug: NGK CM6

Propeller: 30X12; 32X10

Weight: 5.9kg

Parameter

Displacement: 170cc

Bore X Stroke: 52mm X 40mm

Compression Ratio: 9.5: 1

Fuel Ratio: 50:1

Ignition Volt: 8.4V

Voltage for Autostarter: 24V (6S Lipo) without Solenoid or 12V (3S Lipo) W/Solenoid

Product Warranty: 300-500 Hours TBO or 5 years warranty (Conditional) Applied

THIS EFI VERSION ENGINE WAS DESIGNED FOR UAV DRONE WITH 300-500 HOURS TBO. Product quanlity and performance are approved with two years testing in extreme condition. Engines were installed on the multirotors for military & agriculture industries applications. (Propeller not included). With CCW rotation, more options to select propellers on the market to pull or push the aircraft.

Package system with UAV170 EFI CCW/CW Engines & autopilot (Flight Controller) and Propellers otpional (Contact Teamaustars) for Multirotor Petrol/Gas engine version.

Aviation class bearings & metal materials (7075/6061) are used to make crankshaft, piston, crankcase, cylinders etc

THIS IS NOT FOR HOBBY ENGINE 20-50 HOURS longevity

WHY HOBBY ENGINES ONLY HAVE 20-50 HOURS LIFE TIME OR 1-3 YEARS WARRANTY?

• Hobby industry does not need TBOH Over 50 Hours as 99% modellers only can fly 30 Mins Per week in average
• Cost is big concern for most modellers, so, they do not need the expensive metal material same as the one for aviation industry

THIS ENGINE HAS DIFFERENT VERSION WITH AUTO STARTER, GENERATOR, EFI, COUNTER CLOCKWISE (CCW) ROTATION FOR DRONES WITH PUSHER ENGINE. IT ALSO CAN BE USED FOR PARAGLIDER WITH DIFFERENT MUFFLER CONFIGURATION.

SPECIFICATIONS

Performance

Power: 17.5HP/7500rpm/38kg thrust (100 meter sea level)

low Idle Speed: 1100rpm

Sparking Plug: NGK CM6

Propeller: 30X12; 32X10

Weight: 5.9kg

Parameter

Displacement: 170cc

Bore X Stroke: 52mm X 40mm

Compression Ratio: 9.5: 1

Fuel Ratio: 50:1

Ignition Volt: 8.4V

Voltage for Autostarter: 24V (6S Lipo) without Solenoid or 12V (3S Lipo) W/Solenoid

Product Warranty: 300-500 Hours TBO or 5 years warranty (Conditional) Applied