The new RC version of the 1.8-meter Viper weighs 3.5 to 4 kilograms and has been optimized for superior performance. The old version has sold more than 1,000 units (relablled for few brands) in the world, this model performance is very mature, is the primary pilot’s must-have jet! The new Viper construction yields a lighter, better flying jet. Video was edited by team Legendhobby in the States with thanks!

This new version of the 1.8m Viper has the following features:

*Composite construction

*Fully composite structure, light weight, with local reinforcement at stress points to achieve higher sturdiness.

* Upgrade the hatch cover opening and closing method.

* Two-piece wings and tail enable quick disassembly and assembly for easy transportation.

* Integrated molded body.

* Transparent cockpit.

* JP HOBBY Electric Landing Gear, Wheels / Brakes

* The landing gear base is equipped with flexible carbon plates to achieve shock absorption.

Specifications:

185mm Control Ejection Aileron: 9mm Elevator: 15mm.

Rudder: 17mm Flaps: 57mm for landing, 25mm for takeoff.

Product specifications:

Wingspan: 1.96 m.

Length: 1.85 m.

Weight: empty weight 4~4.5kg, full weight, less fuel, 8.5kg.

Fuel tank capacity: 2L

turbine: 8-12 kg.

Requirements for remote control and servo:

Servo: total x8 (standard size x4 + medium size x4)

All the usual accessories are also required, such as transmitters, receivers, servos, batteries, power boxes, turbines, and other possible devices and assembly adhesives etc.

Standard Package: $3299 USD includes:

• 1.Complete ARF
• 2.JP Electric retracts
• 3.Fuel tank, thrust tube, hardware bag, Scale Cockpit with Pilot, 2x sets wing bags for the wing and elevator, UAT fuel tank, Navigation lights, 1xsmoke canopy (modellers can swap the canopy and clear canopy with scale cockpit), 1x clear canopy
• 
  
• PNP version: $650 USD
• includes all MG HV servos and wirings
• 
  
• Total Cost FOR PNP version ($3299+650=$3949 USD)

The new RC version of the 1.8-meter Viper weighs 3.5 to 4 kilograms and has been optimized for superior performance. The old version has sold more than 1,000 units (relablled for few brands) in the world, this model performance is very mature, is the primary pilot’s must-have jet! The new Viper construction yields a lighter, better flying jet. Video was edited by team Legendhobby in the States with thanks!

This new version of the 1.8m Viper has the following features:

*Composite construction

*Fully composite structure, light weight, with local reinforcement at stress points to achieve higher sturdiness.

* Upgrade the hatch cover opening and closing method.

* Two-piece wings and tail enable quick disassembly and assembly for easy transportation.

* Integrated molded body.

* Transparent cockpit.

* JP HOBBY Electric Landing Gear, Wheels / Brakes

* The landing gear base is equipped with flexible carbon plates to achieve shock absorption.

Specifications:

185mm Control Ejection Aileron: 9mm Elevator: 15mm.

Rudder: 17mm Flaps: 57mm for landing, 25mm for takeoff.

Product specifications:

Wingspan: 1.96 m.

Length: 1.85 m.

Weight: empty weight 4~4.5kg, full weight, less fuel, 8.5kg.

Fuel tank capacity: 2L

turbine: 8-12 kg.

Requirements for remote control and servo:

Servo: total x8 (standard size x4 + medium size x4)

All the usual accessories are also required, such as transmitters, receivers, servos, batteries, power boxes, turbines, and other possible devices and assembly adhesives etc.

Standard Package: $3099 USD+ $250 wiring job includes:

• 1.Complete ARF
• 2.JP Electric retracts
• 3.Fuel tank, thrust tube, hardware bag, Scale Cockpit with Pilot, 2x sets wing bags for the wing and elevator, UAT fuel tank, Navigation lights, 1xscale cockpit, and extra wiring job
• 
  
• PNP version: $650 USD Extra Cost
• includes all MG HV servos and wirings

The design of this machine started in 2019 and has been continuously tested, and will be officially launched in August 2023.The aircraft has a length of 1.8M and a wingspan of 1.8M. Scale advanced version was tested in early 2024 with more scale features like scale brakes and scale gear doors etc. It comes with UAT tank, fuel tank, the engine section is located in the centre location of the fuselage which is different from the copied one on the market at the rear, which needs the nose weight to balance the CG (at least 1kg)

It is made of all composite materials and is lightweight, just like the real aircraft, with perfect carvings and rivets.Optional realistic cockpit.The 1.8-meter size customization greatly reduces the constraints on the site for the model aircraft to look like a real aircraft.At the same time, the problem of inconvenient transportation is solved.The engine is designed in front of the aircraft's center of gravity, lengthening the jet duct and reducing the aircraft's counterweight, resulting in a smaller take-off weight.The wings and horizontal tail are both detachable and adopt CNC precision-machined aluminum alloy pipe clamps, which can be easily disassembled and installed for easy transportation.Excellent flight performance.

1.8m F-86 scale turbojet.

Standard configuration 1; fuel tank (2 liters)

1. Developed and designed based on the "F-86" prototype, the composite fuel tank has a reasonable layout and a solid structure.Installation is easy and simple.

2. CNC precision machined fuel nozzle with corresponding thread design.

3. Original copper metal fuel hammer.

4. Transparent fuel tank makes it easy to observe the fuel level.

Standard configuration Scale Landing gear, jointly produced by JP HOBBY, CNC precision machined alloy bracket, installed, high structural strength and light weight. Electromagnetic brakes, rubber tires. After continuous testing and optimization, the bracket supports the carbon plate with excellent braking effect.

Standard Package: $3490 USD

Complete airframe

Scale Electric retracts complete with all gear door functions

Fuel tank, UAT tank, Thrust tube, Scale Drop tanks, complete parts bag

PNP version $690 USD

All metal servos, wirings, gear doors and brake pre set up

Inc: Scale Cockpit enhances aircraft appearance, and improved detail. High degree of scale appearance.

Inc: Scale Pilot as the gift free

The design of this machine started in 2019 and has been continuously tested, and will be officially launched in August 2023.The aircraft has a length of 1.8M and a wingspan of 1.8M. Scale advanced version was tested in early 2024 with more scale features like scale brakes and scale gear doors etc. It comes with UAT tank, fuel tank, the engine section is located in the centre location of the fuselage which is different from the copied one on the market at the rear, which needs the nose weight to balance the CG (at least 1kg)

It is made of all composite materials and is lightweight, just like the real aircraft, with perfect carvings and rivets.Optional realistic cockpit.The 1.8-meter size customization greatly reduces the constraints on the site for the model aircraft to look like a real aircraft.At the same time, the problem of inconvenient transportation is solved.The engine is designed in front of the aircraft's center of gravity, lengthening the jet duct and reducing the aircraft's counterweight, resulting in a smaller take-off weight.The wings and horizontal tail are both detachable and adopt CNC precision-machined aluminum alloy pipe clamps, which can be easily disassembled and installed for easy transportation.Excellent flight performance.

1.8m F-86 scale turbojet.

Standard configuration 1; fuel tank (2 liters)

1. Developed and designed based on the "F-86" prototype, the composite fuel tank has a reasonable layout and a solid structure.Installation is easy and simple.

2. CNC precision machined fuel nozzle with corresponding thread design.

3. Original copper metal fuel hammer.

4. Transparent fuel tank makes it easy to observe the fuel level.

Standard configuration Scale Landing gear, jointly produced by JP HOBBY, CNC precision machined alloy bracket, installed, high structural strength and light weight. Electromagnetic brakes, rubber tires. After continuous testing and optimization, the bracket supports the carbon plate with excellent braking effect.

Standard Package: $3490 USD

Complete airframe

Scale Electric retracts complete with all gear door functions

Fuel tank, UAT tank, Thrust tube, Scale Drop tanks, complete parts bag

PNP version $690 USD

All metal servos, wirings, gear doors and brake pre set up

Inc: Scale Cockpit enhances aircraft appearance, and improved detail. High degree of scale appearance.

Inc: Scale Pilot as the gift free

The design of this machine started in 2019 and has been continuously tested, and will be officially launched in August 2023.The aircraft has a length of 1.8M and a wingspan of 1.8M. Scale advanced version was tested in early 2024 with more scale features like scale brakes and scale gear doors etc. It comes with UAT tank, fuel tank, the engine section is located in the centre location of the fuselage which is different from the copied one on the market at the rear, which needs the nose weight to balance the CG (at least 1kg)

It is made of all composite materials and is lightweight, just like the real aircraft, with perfect carvings and rivets.Optional realistic cockpit.The 1.8-meter size customization greatly reduces the constraints on the site for the model aircraft to look like a real aircraft.At the same time, the problem of inconvenient transportation is solved.The engine is designed in front of the aircraft's center of gravity, lengthening the jet duct and reducing the aircraft's counterweight, resulting in a smaller take-off weight.The wings and horizontal tail are both detachable and adopt CNC precision-machined aluminum alloy pipe clamps, which can be easily disassembled and installed for easy transportation.Excellent flight performance.

1.8m F-86 scale turbojet.

Standard configuration 1; fuel tank (3 Liters) New 2025

1. Developed and designed based on the "F-86" prototype, the composite fuel tank has a reasonable layout and a solid structure.Installation is easy and simple.

2. CNC precision machined fuel nozzle with corresponding thread design.

3. Original copper metal fuel hammer.

4. Transparent fuel tank makes it easy to observe the fuel level.

Standard configuration Scale Landing gear, jointly produced by JP HOBBY, CNC precision machined alloy bracket, installed, high structural strength and light weight. Electromagnetic brakes, rubber tires. After continuous testing and optimization, the bracket supports the carbon plate with excellent braking effect.

Standard Package: $3790 USD

Complete airframe

Scale Electric retracts complete with all gear door functions

Fuel tank (3L), UAT tank, Thrust tube, Scale Drop tanks, complete parts bag, brake, Pilot, scale cockpit, wing bags)

========================================================================

PNP own servos by the flyer

KYHK-2.3M Scale MB-339

KYHK New product 2025.It is constructed with full-body composite materials, which can restore the real machine details such as body lines and rivet textures to the greatest extent possible, optimize the construction process, and pursue the high strength and weight control of the whole machine.

ARF Plus Australia wired version package: including (Color A B C G ordered in stock soon, E color scheme for pre order), simply PNP own servos for the wings and surfaces.

Color scheme A with rudder number #213 is Mil version with scale refueling tube

Color scheme B/G is trainer version w/o scale refueling tube

landing gear preinstalled.

4-liter fuel tank.

Tail nozzle Accessory kit Dual auxiliary fuel tanks.

Tailpipe Scale components.

Intake assembly Carbon fibre sleeve Carbon fibre main pipe. Deceleration cover plate/brake hatch Anti bubble UAT fuel tank Nose refuelling hose (military version) scale Cockpit. Pre installed Light set (nose lights, wing lights, landing gear lights). Ordnance (dual bombs)

Plus free extras scale jet pilot & wing bags

Length: 2.3M

Wingspan: 2.2M

Recommended Turbine size: 12-19kg turbine engines

These Videos & photos created and contributed by all friends/partners on youtube with thanks here!

After consulting countless data, after continuous measurements and modifications, and after countless days and nights of hard work by the team in the States Legendhobby, with big thanks to Legendhobby the team Germany, Teamaustars start to make it available to you today. The first batch production for Australia includes the metal painted version in Silver and Green Razorback color schemes. For other color schemes, the team will help to customise it with little production cost. Contact us for the customised version.

Specifications:

Wingspan: 2850 mm / 112"

Length: 2478 mm / 97.56"

Engine Required : 110-150 2 Stroke Gas or 250cc 4T Radial

Approx Flying Weight: TBA

Requires Servos: (1) Throttle, (2) Elevator, (1) Rudder, (2) Ailerons, (2) Flaps, (1) Retract , (2) Inner Gear Doors, (1) Choke

Features:

*Lightweight all-composite molding to minimize weight.

*Parts of the fuselage are reinforced with carbon fiber to make the whole machine lighter and stronger.

*Extremely detailed restoration, including simulated artillery shells, auxiliary fuel tanks, machine gun barrels, etc.

*Segmented fuselage, quick-detachable wings and tail for easy transportation.

*Completely customized aluminum alloy electric retractable landing gear, CNC finishing technology, light material and high strength.

*JP HOBBY Electric Landing Gear Set with 6″ Aluminum Hub Wheels/tires and Electric Landing Gear Included!

*Fully transparent cockpit with sliding hatch structure (included).

All the usual accessories are also required, such as transmitters, receivers, servos, batteries, power boxes, engine/motor, propeller, and other possible devices and assembly adhesives etc.

ARF PLUS Package includes: ($6990 USD)

Complete Airframe, JP E/Retracts complete, Scale Ordnance package (Bomb, antenna, machine guns, hatch hook), Navigation lights, scale cockpit & sliding canopy package, 1 x fuel tank.

PNP version optional: Including all the wirings and all metal HV servos (Extra cost listed),

Metail Painting optional

It has an all-composite lightweight structure, a length of 2.4M and a wingspan of 1.5M. It has a delta wing design, fast flight speed and strong maneuverability. It is equipped with a standard vector nozzle, which allows the aircraft to complete more stunts.The segmented fuselage design has a simple structure, easy docking, and can be quickly disassembled and assembled. The wings and tail can be disassembled for easy transportation.The delta wing design has excellent flexibility and maneuverability. It has a custom-made composite main fuel tank with a transparent and observable oil level, a capacity of 3L, a CNC-finished oil filler port, and a threaded design that is removable for cleaning.The front and rear wheel well doors are designed to completely cover the holes to reduce flight resistance.The empty weight is 5.5 kg, and the full weight is within 12 kg without refueling. The whole body is light and strong.

Standard Package/ARF Pro: $4290 USD GST inc

Air frame, Landing gear, manufactured in conjunction with JP, CNC precision machined alloy brackets and mounting bases, with high structural strength and light weight.Electromagnetic brakes, tires, CF fuel tank 3L, vector nozzle, UAT tank, parts bag, and Wing Bags

After continuous testing and optimization, a flexible carbon plate was added to the base to achieve a shock-absorbing and buffering effect.

PNP extra Cost: $900 USD

All metal servos, internal wirings pre setup

Product specifications:

Wingspan: 1.5m / 59 inches

Length: 2.4m / 94.48 inches

Weight: The weight of the pure empty machine is about 5 kilograms, and the weight of the whole equipment including the engine is within 12 kilograms.

Fuel tank capacity: 3L

Turbine engine weight: 14-18kg

Servo: total x11 (standard size x7 + medium size x4)

All the usual accessories are also required, such as transmitters, receivers, servos, batteries, power boxes, turbines, and other possible devices and assembly adhesives etc.