VIDEOS FILMED BY INTL PARTNERS WITH THANKS

The J-20 jet is known for its graceful flying style and performance. It's an advanced pilot training aircraft, able to replicate characteristics of CHENGDU 5th generation fighter J-20 which was released in 2011.

All these great characteristics show in the T-One models J-20. It has great scale features, very light weight, Electric retracts/brakes and a overall great flying jet. (Tone jets production normally in 8 x weeks before boarding)

T-ONE MODELS CHENGDU J-20 1/6 SCALE Jet

Fuselage Length 3.38mm

Wingspan 2.15mm

Fuel tank capacity 7.6L

RTF weight: 36-40kg (Suggest 2 x Turbine 170, or 2 x Turbine 190/220)

Servos: Nose gear x 1, leading Edge flap x 2, Aileron x 2, Flap x 2, Vertical tail/rudder x 2, Front Canard wing x 2 (Optional Vector nozzle x 3)

Standard ARF plus Package includes: $8900 USD GST inc

ARF kit, scale air landing gears, Dual thrust tubes, hardware bag, scale cockpit, installed missiles door and cylinder, installed canopy with cylinder, installed control surfaces

PNP Optional (without turbine engines) Includes: $3900 USD GST Inc (Extra Cost)

All surface servos x 11 HV servos

Navigation lights installed

T-one Air valve and controller installed and (Servo controlled Gear doors)

T-one UAT tank

Brake scale parachute optional

Weathering paint optional

New product 2023 made by TONE TEAM

T-ONE MODELS F-35A

Length: 310cm

Wingspan: 214cm

Tank capacity: 6.5L

Engine: 30kg

Standard kit included item Cost $7860 USD

1 Landing gear

2 Fuel tank

3 Tail pipe

4 Hardware

5 Cockpit

6 Install gear and door and door servos

7 Install missiles door and servos and channel extender

8 Install canopy and sewrvos and sequence controller

9 Install surface

PNP (without engine) Extra cost $3450 USD

ALL Surface servos Savox1270

ALL Door servos: SV0220MGP

Navigation light installed

T-one models gear controller

T-one model UAT

FOR PRE ORDER ONLY PRODUCTION COST 6-8 WEEKS.

New product 2023 made by TONE TEAM

T-ONE MODELS F-35A

Length: 310cm

Wingspan: 214cm

Tank capacity: 6.5L

Engine: 30kg

Standard kit included item Cost $7860 USD

1 Landing gear

2 Fuel tank

3 Tail pipe

4 Hardware

5 Cockpit

6 Install gear and door and door servos

7 Install missiles door and servos and channel extender

8 Install canopy and sewrvos and sequence controller

9 Install surface

PNP (without engine) Extra cost $3140 USD

Surface servo Savox1270

Door servo: SV0220MGP

Navigation light installed

T-one models gear controller

T-one model UAT

FOR PRE ORDER ONLY PRODUCTION COST 6-8 WEEKS.

VIDEOS FILMED BY ESSENCIAL RC & DESERT FOX TEAMS WITH THANKS

The T-One Sport is one of the hottest mid-size sport jets on the market. With it's sleek design, solid construction, stunning flight characteristics and competitive pricing, you simply can't go wrong.

The T-1 Sport Jet's low speed agility and low wing loading makes for a great first time jet pilot. But don't be fooled, the T-1 can be an extremely aerobatic machine for the advanced pilot; and has the ability to perform maneuvers effortlessly.

The construction is comprised of Airex composite sandwich core, Fiberglass, Carbon Fiber and aircraft plywood. The exterior colors are painted and polished to a beautiful finish. T-1 Trailing link landing gear, wheels and brakes are solid and smooth (Good for grass fields) The disk brakes make for smooth braking power as well. (Installed Light Package Optional)

NEW VERSION 2022 PNP INCLUDES 2 IN 1 FUEL TANK SYSTEM

T-ONE T1 SPORT JET

Length 2.2m

Wingspan 1.92m
Fuel tank capacity 3.8L
Electric landing gear/ Pneumatic landing gear
Fly weight ≈ 15.5kg

Servo:

8 pcs standard size servo( torque 20~30kg);

Engine 12~16kg

Other Information:

Airex / composite laminate skins

Carbon fiber reinforcements

2 piece fuselage

Removable tail fins. bolts have metal inserts to guide your allen wrench

All removable surfaces held with double aluminum clamps

Kevlar fuel/smoke tank (125oz / 35oz)

Landing gear steering servo mounted on front strut

Extremely lightweight

Large pre-hinged control surfaces with factory installed double control horns

Gear doors

Sturdy aluminum wing spar

Many available paint schemes, with custom schemes available

Extensive hardware included in kit

Removable nose cone

Removable wood / carbon fiber nose structure!

PNP Options:

2. PNP Option #2 (HV AccuTORQ or GDW/DUALSKY/JX HV Servos)- Same option as above with (6) AccuTORQ 600SG/GDW/DUALSKY/JX HV Premium Servos with Aluminum arms $1595.00

T-1 Models are custom made to order, please allow up to 8 weeks for build, paint and packaging time.

ARF Kit Include:

• Electric retracts with electric brakes JP brand (NEW TONE WHEEL BRAKE CONTROLLER RELEASED APRIL 2022)
  
• Complete wire harness with One Click connection
• Split Kevlar fuel/smoke tank with fittings
• Clear canopy

Please note that the shipping times are estimates and may vary, AUSTARS does not have control over factory production or holidays which may cause extended delivery times.

8-12 weeks for build and delivery times, add an extra 2-3 weeks for PNP

SEA FREIGHT TO THE COUNTRIES WHERE NO T ONE DEALERS AROUND $350-600 USD,

Light package/kit includes: Optional $195 USD (included for PNP version)

Controller/Wing Tip NAV Lights/Top (Red) Strobe Light/Bottom (Clear) Strobe Light/Landing Light

VIDEOS FILMED BY ESSENCIAL RC & DESERT FOX TEAMS WITH THANKS. BENZ'S LIVERY WAS GIVEN BY DAN FROM THE STATES AS THE REFERENCE. STOCK IN AUGUST SOLD. NEW STOCK PRE ORDER ACCEPTED

The T-One Sport is one of the hottest mid-size sport jets on the market. With it's sleek design, solid construction, stunning flight characteristics and competitive pricing, you simply can't go wrong.

The T-1 Sport Jet's low speed agility and low wing loading makes for a great first time jet pilot. But don't be fooled, the T-1 can be an extremely aerobatic machine for the advanced pilot; and has the ability to perform maneuvers effortlessly.

The construction is comprised of Airex composite sandwich core, Fiberglass, Carbon Fiber and aircraft plywood. The exterior colors are painted and polished to a beautiful finish. T-1 Trailing link landing gear, wheels and brakes are solid and smooth (Good for grass fields) The disk brakes make for smooth braking power as well. (Installed Light Package Optional)

NEW VERSION 2022 PNP: 2 in 1 fuel tank system

T-ONE T1 SPORT JET

Length 2.2m

Wingspan 1.92m
Fuel tank capacity 3.8L
Electric landing gear/ Pneumatic landing gear
Fly weight ≈ 15.5kg

Servo:

8 pcs standard size servo( torque 20~30kg);

Engine 12~16kg

Other Information:

Airex / composite laminate skins

Carbon fiber reinforcements

2 piece fuselage

Removable tail fins. bolts have metal inserts to guide your allen wrench

All removable surfaces held with double aluminum clamps

Kevlar fuel/smoke tank (125oz / 35oz)

Landing gear steering servo mounted on front strut

Extremely lightweight

Large pre-hinged control surfaces with factory installed double control horns

Gear doors

Sturdy aluminum wing spar

Many available paint schemes, with custom schemes available

Extensive hardware included in kit

Removable nose cone

Removable wood / carbon fiber nose structure!

PNP Options:

2. PNP Option #2 (HV AccuTORQ or GDW/DUALSKY/JX HV Servos)- Same option as above with (6) AccuTORQ 600SG/GDW/DUALSKY/JX HV Premium Servos with Aluminum arms $1595.00

T-1 Models are custom made to order, please allow up to 8 weeks for build, paint and packaging time.

ARF Kit Include:

• Electric retracts with electric brakes JP brand (NEW TONE WHEEL BRAKE CONTROLLER RELEASED APRIL 2022)
  
• Complete wire harness with One Click connection
• Split Kevlar fuel/smoke tank with fittings
• Clear canopy

PNP Option includes:

PNP Option #2 (HV AccuTORQ or GDW/DUALSKY/)- Same option as above with (6) AccuTORQ 600SG/GDW/DUALSKY/ Premium Servos with Aluminum arms $1595.00

T-1 Models are custom made to order, please allow up to 8 weeks for build, paint and packaging time.

Please note that the shipping times are estimates and may vary, AUSTARS does not have control over factory production or holidays which may cause extended delivery times.

8-12 weeks for build and delivery times, add an extra 2-3 weeks for PNP

SEA FREIGHT TO THE COUNTRIES WHERE NO T ONE DEALERS AROUND $350-600 USD,

Light package/kit includes: Optional $195 USD (included for PNP version)

Controller/Wing Tip NAV Lights/Top (Red) Strobe Light/Bottom (Clear) Strobe Light/Landing Light

TONE TEAM NEW PROJECT 2025 ETA EARLY SEPTEMBER 2025 (Production 10 x weeks plus 4 weeks freight)

1/4.3 FA-18F SUPER HORNET JET

Length 4.25m

Wingspan 3.05m

Fuel tank capacity 12L

Pneumatic landing gear

Servo:17 pcs standard size servo( torque 35~40kg);

Engine thrust 23kg*2~26kg*2

Take-off weight 50-55kg

Standard ARF includes:

Fuselage (included tail hook), tail pipes, fuel tank, landing gear (installed)

Gear door and door cylinder (installed)

Air brake and brake cylinder (installed)

Functional canopy (installed)

Optional:

Painted Ordance package (including pylon?

Weathering

Upgraded basic cockpit

Upgraded full version cockpit (with LED screen)

Upgraded Lights

Auto pump full set (pump & controller, no valve)

PNP version includes:

ARF standard

17 x Theta X1 servos installed

Fuel system installed

13 ways air controller system

Navigation lights installed

TONE TEAM NEW PROJECT 2025 ETA EARLY SEPTEMBER 2025 (Production 10 x weeks plus 4 weeks freight)

1/4.3 FA-18F SUPER HORNET JET

Length 4.25m

Wingspan 3.05m

Fuel tank capacity 12L

Pneumatic landing gear

Servo:17 pcs standard size servo( torque 35~40kg);

Engine thrust 23kg*2~26kg*2

Take-off weight 50-55kg

Standard ARF includes:

Fuselage (included tail hook), tail pipes, fuel tank, landing gear (installed)

Gear door and door cylinder (installed)

Air brake and brake cylinder (installed)

Functional canopy (installed)

Optional:

Weathering

Auto pump full set (pump & controller, no valve)

PNP version includes:

ARF standard

17 x Theta X1 servos installed

Fuel system installed

13 ways air controller system

Navigation lights installed

Painted Ordnance with pylon

Upgraded full version cockpit with LED screen

Upgraded NAV lights

THE PC-21 WAS DESIGNED AROUND THE K45TP or JETCAT SPT-5. THE PC-21 FEATURES SCALE DETAILS, HIDDEN LINKAGE, RAISED RIVETS, PANEL LINES, SCALE FLAPS, SCALE COCKPIT AND MANY OTHER FEATURES

CLICK MANUAL TO DOWNLOAD IT

• Length of fuselage: 2.3M /230cm/or 91",

• Wingspan: 1.85M or 73"

• Dry weight 13.2kg or 29lbs, flying weight 14.5kg or 32lbs

• Fuel tank, Fiber Glass with machined fittings, 1.7L or 57 oz

Servo sizes:

Ailerons: 2 mini servo

Steering: 1 mini servo

Elevator: 1 standard

Rudder: 1 standard

Flaps: 2 standard

ARF Pro Version includes: ARF Painted kit, 1.7L fuel tank, electric landing gear, gear door & door servo (HV) installed ,all hinges and control horns

PNP Version includes: (Optional $1595 USD)

ARF Pro Version, HV Servos installed, wire harnes installed with 1 connector at wings, T-one UAt, fuel tank plumbed, Standard Scale Cockpit, scale light installed

For ARF Pro version unpainted $3495 USD

Options:

Scale lights including slime lights == Scale Lights (Included for PNP)

Painted Spinner cut for 3 blade == Spinner

Painted Spinner no cuts == Spinner

3 Blade prop 18x16x3 == 3B Propeller

Upgraded Cockpit=Upgrded Cockpit (Abbreviation word)

production time around 6-8 weeks plus intl freight by air or sea to Australia and NZ 4-6 weeks

NEW STOCK IN LIVERY C & J ETA EARLY September 2024

T-ONE MODELS MINI HAWK T1

Length 1.9m

Wingspan 1.6m
Fuel tank capacity 2.5L
Electric landing gear
Dry weight ≈ 9kg

Servo:

1 pcs standard size servo( torque 20~30kg);

5 pcs medium size servo( torque 10~16kg);

3 pcs mediium thin size servo( torque 6~11kg)

Engine 6~8.5kg

ARF Kit: INCLUDES:

Any painted scale scheme

E-gear with T-One E-gear controller

Gear installed

Gear door and door servos installed,

Cockpit

Pipe

Kevlar fuel tank, 90 oz

Hinging and control horns installed

Hardware.

Upgraded Options:

Installed lights $145 USD

Painted belly drop tank = Drop Tank $70

Hawk PNP Upgrade = Upgrade

PNP INCLUDES: $790 USD

HV Servos

Wire harness with quick connectors

Installed lights

fuel system plumbed

Kingtech UAT

PRODUCTION TIME AROUND 8-10 WEEKS AND INTL SEA FREIGHT AROUND 4-6 WEEKS

COF: SYDNEY AUSTRALIA

NEW STOCK BE ETA JULY 2022. PRE ORDER ACCEPTED RED NAVY LIVERY. RED HAWK IN STOCK

VIDEO FILMED BY INTL PARTNER WITH THANKS

T-ONE MODELS 1/4.75 HAWK T1 (SHORT NOSE)

Length 2.38m

Wingspan 1.88m
Fuel tank capacity 4.8L
Pneumatic landing gear
Dry weight ≈ 12.5kg

Servo:

8 pcs standard size servo( torque 20~30kg);

Engine 12~16kg

ARF Version Includes:

Electric Gear and Brakes

Doors installed

Door servos installed

Cockpit

Pipe

Kevlar Fuel Tank

Hardware

Speed brake Installed with servo

PNP Option available +$1895.00

Installed Lights, All servo wires installed, HV Servos with all linkage installed, UAT and Tanks with Fuel lines installed, Complete E-Gear set with brakes, doors, and door servos installed

STANDARD ARF Version PRICE $3895.00 PLUS SHIPPING. FOR LOCAL PRICE WITH GST INC, IT INCLUDES INTL FREIGHT COST AND LOCAL GST/BROKER FEE ETC. FOR CUSTOMERS FROM OTHER COUNTRIES, TRY TO CONTACT YOUR LOCAL IMPORTER/DEALER, IF NO LUCK, CONTACT US FOR THE HELP. PRODUCTION NEEDS 6-12 WEEKS AND PLUS 5 WEEKS FREIGHT TO AUSTRALIA OR NZ

Please note that the shipping times are estimates and may vary, AUSTARS does not have control over factory production or holidays which may cause extended delivery times. 8-20 weeks build and delivery times, please add 2-3 extra weeks for PNP

Options Meanings:

Scale Light Kit Installed = Installed lights

Painted Center Drop Tank = Drop Tank

Hawk Wing and Stab Case = W/S Case

Hawk Servo Harness Kit = H/Kit

NEW STOCK IN LIVERY NAVY J (WHITE RED/sold) and local RAAF D in stock

T-ONE MODELS MINI HAWK T1

Length 1.9m

Wingspan 1.6m
Fuel tank capacity 2.5L
Electric landing gear
Dry weight ≈ 9kg

Servo:

1 pcs standard size servo( torque 20~30kg);

5 pcs medium size servo( torque 10~16kg);

3 pcs mediium thin size servo( torque 6~11kg)

Engine 6~8.5kg

ARF Kit: INCLUDES:

Any painted scale scheme

E-gear with T-One E-gear controller

Gear installed

Gear door and door servos installed,

Cockpit

Pipe

Kevlar fuel tank, 90 oz

Hinging and control horns installed

Hardware.

Upgraded Options:

Installed lights $145 USD

Painted belly drop tank = Drop Tank $70

Hawk PNP Upgrade = Upgrade

PNP INCLUDES: $790 USD

HV Servos

Wire harness with quick connectors

Installed lights

fuel system plumbed

Kingtech UAT

PRODUCTION TIME AROUND 8-10 WEEKS AND INTL SEA FREIGHT AROUND 4-6 WEEKS

COF: SYDNEY AUSTRALIA

THE 1.9M RAZOR IS THE SECOND SERIES OF SPORT JETS FOLLOWING THE POPULAR T-1 SPORT JET LINE.

THE RAZOR CHARACTERISTICS ARE SIMILAR TO THE T-1 WITH SOME ADDED FLAIR.
THE SLEEK DESIGN MATCHED WITH A K85 TO K102 IS EXCEPTIONAL WHILE MAINTAINING AGILITY AND STABILITY THROUGHOUT THE FLIGHT ENVELOPE.

Construction is all composite, wood formers, externally painted and polished.

ARF includes:

• Painted Airframe
• Electric gear and brakes
• T-One gear controller with gyro steering
• Fuel Tank
• Hardware
• Pipe

Specs:

• Length: 75"
• Wing Span: 66"
• Fuel: 68oz
• Dry weight: 18.5Lbs
• Engine: K85 to K102

Options:

• Lights: Installed with T-One Light Controller
• PNP: HV servos installed, wire harness, linkage connected, fuel systems installed, T-One UAT, gear installed and lights installed.

Shipping Sea Freight, Approx. 8 Weeks +/- or Air Freight Approx. 10 Days +/- After ARF is built.

Please note that the shipping times are estimates and may vary, AM does not have control over factory production or holidays which may cause extended delivery times.

Due to Covid, Shipping fees are estimated for Sea & Air and are subject to change either way. Final shipping will be adjusted when the kit is ready to ship.

8-12 weeks for build and delivery times, please add 2-3 weeks extra for PNP

VIDEOS FILMED BY INTL PARTNERS WITH THANKS!

1/4.75 HAWK 100 (LONG NOSE)THE HAWK FEATURES SCALE DETAILS, RAISED RIVETS, PANEL LINES, SCALE FLAPS AND MANY OTHER FEATURES

T-ONE MODELS 1/4.75 HAWK 100

Length 2.48m

Wingspan 1.95m
Fuel tank capacity 4.8L
Pneumatic landing gear
Dry weight ≈ 12.5kg

Servo:

8 pcs standard size servo( torque 20~30kg);

Engine 12~16kg

ARF Version Includes:

Electric gear and brakes Doors installed

Door servos installed

Cockpit

Pipe

152oz Kevlar Fuel Tank

Hardware

Speed brake with servo Installed

PNP option available +$1895.00

Installed Lights, All servo wires installed, HV Servos with all linkage installed, UAT and Tanks with Fuel lines installed, Complete E-Gear set with brakes, doors, and door servos installed.

STANDARD ARF Version PRICE $3895.00 PLUS SHIPPING. FOR LOCAL PRICE WITH GST INC, IT INCLUDES INTL FREIGHT COST AND LOCAL GST/BROKER FEE ETC. FOR CUSTOMERS FROM OTHER COUNTRIES, TRY TO CONTACT YOUR LOCAL IMPORTER/DEALER, IF NO LUCK, CONTACT US FOR THE HELP. PRODUCTION NEEDS 6-12 WEEKS AND PLUS 5 WEEKS FREIGHT TO AUSTRALIA OR NZ

Upgrade Options:

• Scale Light Kit Installed $190.00
• Tip Missile Set Painted $95.00
• Under-wing Missiles and Rails Painted $95.00
• Drop Tanks with Pylons Painted $110.00

Options Meanings:

Scale Light Kit Installed = Installed lights

Tip Missile Set Painted = Missile Setting

Under-wing Missiles and Rails Painted = Under-wing missiles

Drop Tanks with Pylons Painted = Drop Tank

Hawk T-1 and Hawk 100 Servo Harness Kit = H/Kit

Hawk T-1 and Hawk 100 Wing and Stab Case = W/S Case

VIDEOS FILMED BY INTL PARTNERS WITH THANKS

The YAK 130 jet is known for its graceful flying flying style and performance. It's an advanced pilot training aircraft, able to replicate characteristics of Russian 4th and 5th generation fighters.

All these great characteristics show in the T-One models Yak-130. It has great scale features, very light weight, Electric retracts/brakes and a overall great flying jet.

T-ONE MODELS YAK 130 1/5.5 SCALE ARF

Length 2.1m

Wingspan 1.85m
Fuel tank capacity 3.8L
Electric landing gear
Dry weight ≈ 13.5kg

Weight 18 Lbs dry weight, recommended Engine ACE120/JETCAT 120/K120 without ordinance - ACE170/JETCAT 180/K160 With ordinance

Servo:

8 pcs standard size servo( torque 20~30kg);

1 pcs medium size servo( torque 8~20kg);

4 pcs micro size servo( torque 4~5kg)

Engine 12~16kg

Standard YAK-130 ARF Package: $4125 USD

Painted air-frame, scale speed brake installed, detailed Fiberglass scale cockpit, Kevlar tank with fittings, hardware package, pipe, scale painted electric gear/wheels and brakes with Xicoy LG-15 E-Gear Controller/Sequencer with Steering Gyro, gear & doors with servos installed.

Upgraded Options:

Scale light kit installed 13+ lights with programmable controller = Progra Controller $395 USD

Scale painted ordinance package with pylons = Scale painted $595 USD

Wing Bag set $225 USD

PNP version includes ARF & Upgraded options, all HV GDW/DUALSKY/JX large torque servos, wirings, just PNP your own TX/RX & engine-go fly! $3100 USD PNP

Please note that the shipping times are estimates and may vary, AUSTARS does not have control over factory production or holidays which may cause extended delivery times.

8-20 weeks for build and delivery times, please add 2-3 extra weeks for PNP

NEW LIVERY G IN STOCK ETA JULY 2022

T-One Models all composite F-16 is designed around the smaller 60 to 85 Turbine engines. It is very detailed with rivets, panel lines and raised features. The T-One F-16 also comes with all electric scale operating landing gear and brakes using the Xicoy LG-15 E-Gear Controller/Sequencer with Steering Gyro. The F-16 has plug in direct drive ailerons and removable tail. Surfaces are pre-hinged with Robart style pin hinges.

We also offer this jet in a PNP, Plug and Play version upgrade for only $900.00 extra. See details below.

Wing/body bag set available in drop down menu. Must be ordered at time of kit order or extra shipping charges will apply.

T-ONE MODELS 1/8.5 F-16

Length 1.8m

Wingspan 1.2m
Fuel tank capacity 1.8L
Electric landing gear
Dry weight ≈ 6.8g

Servo:

6pcs medium size servo( torque 10~15kg);

Engine 6~8.5kg

Kit includes:

Air frame

Electric gear set and brakes

Kevlar fuel tanks 1.8L / 60.8oz

Hardware

Pipe

Half cockpit tub

PNP Version:

The PNP upgrade includes everything listed in the Kit package and the Upgrade Options package plus the following: (excluding Under wing Missiles)

All servos and linkage installed (6) Digital Metal gear servos)

All servo and gear leads installed and routed to front of jet

Installed Fuel system with UAT plumbed and vented

Installed Pipe and hardware

Just add your RX, Batteries and 60 to 85 Turbine!

Upgraded Options:

Installed lighting kit = Installed lights 190USD

Installed gear/doors and 3 servos = Gear/Doors/Servo 160 USD

Wing tip missile set painted = Wing missile 65 USD

Under-wing missiles with pylons painted = Under-wing missiles 95 USD

PNP Version:

The PNP upgrade includes everything listed in the Kit package and the Upgrade Options package plus the following: (excluding Under wing Missiles)

• All servos and linkage installed (6) Digital Metal gear servos)
• All servo and gear leads installed and routed to front of jet
• Installed Fuel system with UAT plumbed and vented
• Installed Pipe and hardware

Just add your RX, Batteries and 60 to 85 Turbine!

Please select the PNP Upgrade in the drop down menu.

Please note that the shipping times are estimates and may vary, AUSTARS does not have control over factory production or holidays which may cause extended delivery times.

8-20 weeks for build and delivery times, please add 2-3 extra weeks for PNP

Shipping cost is $330.00

VIDEOS FILMED BY ESSENCIAL RC & DESERT FOX TEAMS WITH THANKS

The T-One Sport is one of the hottest mid-size sport jets on the market. With it's sleek design, solid construction, stunning flight characteristics and competitive pricing, you simply can't go wrong.

The T-1 Sport Jet's low speed agility and low wing loading makes for a great first time jet pilot. But don't be fooled, the T-1 can be an extremely aerobatic machine for the advanced pilot; and has the ability to perform maneuvers effortlessly.

The construction is comprised of Airex composite sandwich core, Fiberglass, Carbon Fiber and aircraft plywood. The exterior colors are painted and polished to a beautiful finish. T-1 Trailing link landing gear, wheels and brakes are solid and smooth (Good for grass fields) The disk brakes make for smooth braking power as well. (Installed Light Package Optional)

T-ONE T1 SPORT JET

Length 2.2m

Wingspan 1.92m
Fuel tank capacity 3.8L
Electric landing gear/ Pneumatic landing gear
Fly weight ≈ 15.5kg

Servo:

8 pcs standard size servo( torque 20~30kg);

Engine 12~16kg

Other Information:

Airex / composite laminate skins

Carbon fiber reinforcements

2 piece fuselage

Removable tail fins. bolts have metal inserts to guide your allen wrench

All removable surfaces held with double aluminum clamps

Kevlar fuel/smoke tank (125oz / 35oz)

Landing gear steering servo mounted on front strut

Extremely lightweight

Large pre-hinged control surfaces with factory installed double control horns

Gear doors

Sturdy aluminum wing spar

Many available paint schemes, with custom schemes available

Extensive hardware included in kit

Removable nose cone

Removable wood / carbon fiber nose structure!

PNP Options:

2. PNP Option #2 (HV AccuTORQ or GDW/DUALSKY/JX HV Servos)- Same option as above with (6) AccuTORQ 600SG/GDW/DUALSKY/JX HV Premium Servos with Aluminum arms $1595.00

T-1 Models are custom made to order, please allow up to 8 weeks for build, paint and packaging time.

Standard Color, Complete ARF kit 2460 USD

Custom Paint, Complete Kit 2860 USD

ARF Kit includes:

• Electric retracts with electric brakes JP BRAND
  
• Complete wire harness with One Click connection
• Split Kevlar fuel/smoke tank with fittings
• Clear canopy

Please note that the shipping times are estimates and may vary, AUSTARS does not have control over factory production or holidays which may cause extended delivery times.

8-12 weeks for build and delivery times, add an extra 2-3 weeks for PNP

SEA FREIGHT TO THE COUNTRIES WHERE NO T ONE DEALERS AROUND $350-600 USD,

Light package/kit includes: Optional $195 USD (INCLUDED FOR PNP VERSION)

Controller/Wing Tip NAV Lights/Top (Red) Strobe Light/Bottom (Clear) Strobe Light/Landing Light

NEW STOCK BE ETA JULY 2022. PRE ORDER ACCEPTED RED NAVY LIVERY. RED HAWK IN STOCK

VIDEO FILMED BY INTL PARTNER WITH THANKS

T-ONE MODELS 1/4.75 HAWK T1 (SHORT NOSE)

Length 2.38m

Wingspan 1.88m
Fuel tank capacity 4.8L
Pneumatic landing gear
Dry weight ≈ 12.5kg

Servo:

8 pcs standard size servo( torque 20~30kg);

Engine 12~16kg

ARF Version Includes:

Electric Gear and Brakes

Doors installed

Door servos installed

Cockpit

Pipe

Kevlar Fuel Tank

Hardware

Speed brake Installed with servo

PNP Option available +$1895.00

Installed Lights, All servo wires installed, HV Servos with all linkage installed, UAT and Tanks with Fuel lines installed, Complete E-Gear set with brakes, doors, and door servos installed

STANDARD ARF Version PRICE $3895.00 PLUS SHIPPING. FOR LOCAL PRICE WITH GST INC, IT INCLUDES INTL FREIGHT COST AND LOCAL GST/BROKER FEE ETC. FOR CUSTOMERS FROM OTHER COUNTRIES, TRY TO CONTACT YOUR LOCAL IMPORTER/DEALER, IF NO LUCK, CONTACT US FOR THE HELP. PRODUCTION NEEDS 6-12 WEEKS AND PLUS 5 WEEKS FREIGHT TO AUSTRALIA OR NZ

Please note that the shipping times are estimates and may vary, AUSTARS does not have control over factory production or holidays which may cause extended delivery times. 8-20 weeks build and delivery times, please add 2-3 extra weeks for PNP

Options Meanings:

Scale Light Kit Installed = Installed lights

Painted Center Drop Tank = Drop Tank

Hawk Wing and Stab Case = W/S Case

Hawk Servo Harness Kit = H/Kit

FIRST BATCH STOCK ALL SOLD (ETA 27TH APRIL 2022), NEW STOCK BE HERE AROUND JULY 2022 NEW LIVERY IN A2 AND A3

VIDEOS FILMED BY PARTNERS WORLDWIDE WITH THANKS

The T-One Models 1.7m Mini T-1 jet is a small light weight version of the great T-1 and T-3 Sport Jets. Its designed to fly on K45 to K85 size engines. The 1.7m makes for a great inexpensive (ALL COMPOSITE PAINTED) first time and everyday jet due to its size, stability and cost.

Like its big brothers the 1.7 Mini T-1's are built using Airex composite sandwich core, Fiberglass, Carbon Fiber and aircraft plywood. The exterior colors are painted and polished to a beautiful finish. The kit is complete with Electric Trailing link gear and electric brakes.

T-ONE MINI 1.7M SPORT JET

Length 1.7m

Wingspan 1.48m
Fuel tank capacity 2.5L
Electric landing gear
Fly weight ≈ 9kg

Servo:

8 pcs medium size servo( torque 10~15kg);

Engine 6~8.5kg

Jet ARF Includes:

1.7m T-One Sport Jet externally painted

Factory installed nose door with Titanium gear digital HV door Servo

Electric Gear and brake set with JP E-Gear Controller/Sequencer with Steering Gyro

Fiberglass Fuel Tank 60Oz

Fiberglass Smoke Tank 27oz

Hardware package

Tail pipe

PNP Version:

The PNP upgrade includes everything listed in the standard Kit package plus the following:

All servos, wires and linkage installed

Fuel tanks and system with UAT installed, plumbed and vented

Installed Pipe and hardware

PNP with AccuTORQ 220SG Servos

Standard Color, Complete kit 2125 USD

Custom Paint, Complete Kit 2295 USD

PNP with GDW, DUALSKY, OR JX HV MG Large Torque Servos $1270.00 upgrade in drop down menu.

PNP Version:

The PNP upgrade includes everything listed in the standard Kit package plus the following:

• All servos, wires and linkage installed
• Fuel tanks and system with UAT installed, plumbed and vented
• Installed Pipe and hardware

Add installed smoke system with KT pump in the drop down menu for $225.00

Factory installed nose door with Titanium gear digital HV door Servo

Light Kit package includes:

CONTROLLER/WING TIP NAV LIGHTS/TOP(RED) STROBE LIGHT/BOTTOM (CLEAR) STROBE LIGHT/LANDING LIGHT

Wing Bag & Fuselage Set includes: the bags for both in black color

Shipping $300-475.00 Sea Freight, Approx. 8 Weeks +/- or $600-725.00 Air Freight Approx. 10 Days +/-

Please note that the shipping times are estimates and may vary, AUSTARS does not have control over factory production or holidays which may cause extended delivery times.

8-12 weeks for build and delivery times, please add 2-3 weeks extra for PNP

DHL Shipping $xxx (5-7 Days) after assembly of kit. Please call for DHL shipping arraignments

VIDEOS FILMED BY JACKSONLAM WITH THANKS! (All stock listed on rctrader in June sold, new order by Pre order only for livery option)

The T-One Models Micro T-1 jet is a smaller and lighter weight version of the great 1.7 T-1 Mini Sport Jet. Its a one peace wing design, tail or center mounted engine and designed to fly on 45 MAX size engine. The Micro T-1 makes for a great inexpensive (ALL COMPOSITE PAINTED) jet. This jet is compact and will address the needs and wants of the pilots that have small spaces to transport and store.

Like its big brothers the Micro T-1's are built using Airex composite sandwich core, Fiberglass, Carbon Fiber and aircraft plywood. The exterior colors are painted and polished to a beautiful finish. The kit is complete with Electric Trailing link gear and electric brakes.

PNP upgrade is $700.00
Includes HV servos installed, UAT installed, tank plumbing, servos extensions all the way to the receiver, landing gear and gear/brake controllers installed

T-ONE MICRO SPORT JET

Length 1.48m

Wingspan 1.34m
Fuel tank capacity 1L
Electric landing gear/ Pneumatic landing gear
Fly weight ≈ 5kg

Servo:

8 pcs micro size servo( torque 5~8kg);

Engine 3~4.5kg

Jet ARF Includes:

Micro T-One Sport Jet externally painted

Factory installed nose door with Titanium gear digital HV door Servo

Electric Gear and brake set with JP OR (Xicoy LG-15 E-Gear) Controller/Sequencer with Steering Gyro.

Fuel Tank 33.81oz

Hardware package

Tail pipe for K-45

Initial setup:

CG 173mm From L/E Root

Elv. 15mm U/D Measure Inboard

Rud. 30mm R/L

Ail. 12mm U/D Measure Outbound

Flaps 20mm Take off / 50mm Landing, Measure Inboard

Crow 5mm Measure Outbound

PNP upgrade is $700.00
Includes HV servos installed, UAT installed, tank plumbing, servos extensions all the way to the receiver, landing gear and gear/brake controllers installed

Complete painted kit $1705.00 USD

Shipping 250-580.00 USD BY AIR .

IN AUSTRALIA, PLEASE REFER TO THE VERSION WITH GST (INTL FREIGHT INCLUDED)

Please note that the shipping times are estimates and may vary, AUSTARS does not have control over factory production or holidays which may cause extended delivery times. Approximately 8-12 weeks for build and ship on standard sport jets, add 2-3 extra weeks for PNP models

Wing and fuselage bag also available.

T-One Models all composite F-16 is designed around the smaller 60 to 85 Turbine engines. It is very detailed with rivets, panel lines and raised features. The T-One F-16 also comes with all electric scale operating landing gear and brakes using the Xicoy LG-15 E-Gear Controller/Sequencer with Steering Gyro. The F-16 has plug in direct drive ailerons and removable tail. Surfaces are pre-hinged with Robart style pin hinges.

We also offer this jet in a PNP, Plug and Play version upgrade for only $900.00 extra. See details below.

Wing/body bag set available in drop down menu. Must be ordered at time of kit order or extra shipping charges will apply.

T-ONE MODELS 1/8.5 F-16

Length 1.8m

Wingspan 1.2m
Fuel tank capacity 1.8L
Electric landing gear
Dry weight ≈ 6.8g

Servo:

6pcs medium size servo( torque 10~15kg);

Engine 6~8.5kg

Kit includes:

Air frame

Electric gear set and brakes

Kevlar fuel tanks 1.8L / 60.8oz

Hardware

Pipe

Half cockpit tub

PNP Version:

The PNP upgrade includes everything listed in the Kit package and the Upgrade Options package plus the following: (excluding Under wing Missiles)

All servos and linkage installed (6) Digital Metal gear servos)

All servo and gear leads installed and routed to front of jet

Installed Fuel system with UAT plumbed and vented

Installed Pipe and hardware

Just add your RX, Batteries and 60 to 85 Turbine!

Upgraded Options:

Installed lighting kit = Installed lights 190USD

Installed gear/doors and 3 servos = Gear/Doors/Servo 160 USD

Wing tip missile set painted = Wing missile 65 USD

Under-wing missiles with pylons painted = Under-wing missiles 95 USD

PNP Version:

The PNP upgrade includes everything listed in the Kit package and the Upgrade Options package plus the following: (excluding Under wing Missiles)

• All servos and linkage installed (6) Digital Metal gear servos)
• All servo and gear leads installed and routed to front of jet
• Installed Fuel system with UAT plumbed and vented
• Installed Pipe and hardware

Just add your RX, Batteries and 60 to 85 Turbine!

Please select the PNP Upgrade in the drop down menu.

Please note that the shipping times are estimates and may vary, AUSTARS does not have control over factory production or holidays which may cause extended delivery times.

8-20 weeks for build and delivery times, please add 2-3 extra weeks for PNP

Shipping cost is $330.00

VIDEOS FILMED BY INTL PARTNERS WITH THANKS!

T-ONE EUROFIGHTER TYPHOON

Length 2.2m

Wingspan 1.52m
Fuel tank capacity 4L
Electric landing gear
Dry weight ≈ 13.5kg

Servo:

7 pcs standard size servo( torque 20~30kg);

Engine 14~16kg

Standard ARF kit comes with:

2.0L/68oz Kevlar tank

single pipe version only

Scale landing gear set/doors

Air Cylinders for doors, canopy operation and speed brake

Hardware

Gear, doors, operational canopy and speed brake installed

Upgraded Options

Cockpit = Cockpit Kit

2nd Fuel tank

Light Kit = Light Kit lnstalled

Wing D Tanks = Wing Drop Tanks

Missiles

Single C/Pipe = Single Center Pipe 100-120

Y-Pipe = Hipe Y-Pipe 140-160-

Servos = Eurofighter (7) PACK SAVOX SERVO SA-1256TG OR GDW/DUALSKY/JX HIGH TORQUE

Shipping by Sea freight around $350-$595.00 USD, Air freight is expensive.

Please note that the shipping times are estimates and may vary, AUSTARS does not have control over factory production or holidays which may cause extended delivery times.

8-20 weeks for build and delivery times. please add 2-3 extra weeks for PNP (Contact us for pricing)

VIDEOS FILMED BY INTL PARTNERS WITH THANKS!

T-ONE EUROFIGHTER TYPHOON

Length 2.2m

Wingspan 1.52m
Fuel tank capacity 4L
Electric landing gear
Dry weight ≈ 13.5kg

Servo:

7 pcs standard size servo( torque 20~30kg);

Engine 14~16kg

Standard ARF kit comes with:

2.0L/68oz Kevlar tank

single pipe version only

Scale landing gear set/doors

Air Cylinders for doors, canopy operation and speed brake

Hardware

Gear, doors, operational canopy and speed brake installed

Upgraded Options

Cockpit = Cockpit Kit

2nd Fuel tank

Light Kit = Light Kit lnstalled

Wing D Tanks = Wing Drop Tanks

Missiles

Single C/Pipe = Single Center Pipe 100-120

Y-Pipe = Hipe Y-Pipe 140-160-

Servos = Eurofighter (7) PACK SAVOX SERVO SA-1256TG OR GDW/DUALSKY/JX HIGH TORQUE

Shipping by Sea freight around $350-$595.00 USD, Air freight is expensive.

Please note that the shipping times are estimates and may vary, AUSTARS does not have control over factory production or holidays which may cause extended delivery times.

8-20 weeks for build and delivery times. please add 2-3 extra weeks for PNP (Contact us for pricing)

VIDEOS FILMED BY INTL PARTNERS WITH THANKS!

1/4.75 HAWK 100 (LONG NOSE)THE HAWK FEATURES SCALE DETAILS, RAISED RIVETS, PANEL LINES, SCALE FLAPS AND MANY OTHER FEATURES

T-ONE MODELS 1/4.75 HAWK 100

Length 2.48m

Wingspan 1.95m
Fuel tank capacity 4.8L
Pneumatic landing gear
Dry weight ≈ 12.5kg

Servo:

8 pcs standard size servo( torque 20~30kg);

Engine 12~16kg

ARF Version Includes:

Electric gear and brakes Doors installed

Door servos installed

Cockpit

Pipe

152oz Kevlar Fuel Tank

Hardware

Speed brake with servo Installed

PNP option available +$1895.00

Installed Lights, All servo wires installed, HV Servos with all linkage installed, UAT and Tanks with Fuel lines installed, Complete E-Gear set with brakes, doors, and door servos installed.

STANDARD ARF Version PRICE $3895.00 PLUS SHIPPING.

Upgrade Options:

• Scale Light Kit Installed $190.00
• Tip Missile Set Painted $95.00
• Under-wing Missiles and Rails Painted $95.00
• Drop Tanks with Pylons Painted $110.00

Options Meanings:

Scale Light Kit Installed = Installed lights

Tip Missile Set Painted = Missile Setting

Under-wing Missiles and Rails Painted = Under-wing missiles

Drop Tanks with Pylons Painted = Drop Tank

Hawk T-1 and Hawk 100 Servo Harness Kit = H/Kit

Hawk T-1 and Hawk 100 Wing and Stab Case = W/S Case

VIDEOS FILMED BY INTL PARTNERS WITH THANKS!

1/4.75 HAWK 100 (LONG NOSE)THE HAWK FEATURES SCALE DETAILS, RAISED RIVETS, PANEL LINES, SCALE FLAPS AND MANY OTHER FEATURES

T-ONE MODELS 1/4.75 HAWK 100

Length 2.48m

Wingspan 1.95m
Fuel tank capacity 4.8L
Pneumatic landing gear
Dry weight ≈ 12.5kg

Servo:

8 pcs standard size servo( torque 20~30kg);

Engine 12~16kg

ARF Version Includes:

Electric gear and brakes Doors installed

Door servos installed

Cockpit

Pipe

152oz Kevlar Fuel Tank

Hardware

Speed brake with servo Installed

PNP option available +$1895.00

Installed Lights, All servo wires installed, HV Servos with all linkage installed, UAT and Tanks with Fuel lines installed, Complete E-Gear set with brakes, doors, and door servos installed.

STANDARD ARF Version PRICE $3895.00 PLUS SHIPPING.

Upgrade Options:

• Scale Light Kit Installed $190.00
• Tip Missile Set Painted $95.00
• Under-wing Missiles and Rails Painted $95.00
• Drop Tanks with Pylons Painted $110.00

Options Meanings:

Scale Light Kit Installed = Installed lights

Tip Missile Set Painted = Missile Setting

Under-wing Missiles and Rails Painted = Under-wing missiles

Drop Tanks with Pylons Painted = Drop Tank

Hawk T-1 and Hawk 100 Servo Harness Kit = H/Kit

Hawk T-1 and Hawk 100 Wing and Stab Case = W/S Case

VIDEOS FILMED BY INTL PARTNERS WITH THANKS!

1/4.75 HAWK 100 (LONG NOSE)THE HAWK FEATURES SCALE DETAILS, RAISED RIVETS, PANEL LINES, SCALE FLAPS AND MANY OTHER FEATURES

T-ONE MODELS 1/4.75 HAWK 100

Length 2.48m

Wingspan 1.95m
Fuel tank capacity 4.8L
Pneumatic landing gear
Dry weight ≈ 12.5kg

Servo:

8 pcs standard size servo( torque 20~30kg);

Engine 12~16kg

ARF Version Includes:

Electric gear and brakes Doors installed

Door servos installed

Cockpit

Pipe

152oz Kevlar Fuel Tank

Hardware

Speed brake with servo Installed

PNP option available +$1895.00

Installed Lights, All servo wires installed, HV Servos with all linkage installed, UAT and Tanks with Fuel lines installed, Complete E-Gear set with brakes, doors, and door servos installed.

STANDARD ARF Version PRICE $3895.00 PLUS SHIPPING.

Upgrade Options:

• Scale Light Kit Installed $190.00
• Tip Missile Set Painted $95.00
• Under-wing Missiles and Rails Painted $95.00
• Drop Tanks with Pylons Painted $110.00

Options Meanings:

Scale Light Kit Installed = Installed lights

Tip Missile Set Painted = Missile Setting

Under-wing Missiles and Rails Painted = Under-wing missiles

Drop Tanks with Pylons Painted = Drop Tank

Hawk T-1 and Hawk 100 Servo Harness Kit = H/Kit

Hawk T-1 and Hawk 100 Wing and Stab Case = W/S Case

VIDEO FILMED BY INTL PARTNER WITH THANKS

T-ONE MODELS 1/4.75 HAWK T1 (SHORT NOSE)

Length 2.38m

Wingspan 1.88m
Fuel tank capacity 4.8L
Pneumatic landing gear
Dry weight ≈ 12.5kg

Servo:

8 pcs standard size servo( torque 20~30kg);

Engine 12~16kg

ARF Version Includes:

Electric Gear and Brakes

Doors installed

Door servos installed

Cockpit

Pipe

Kevlar Fuel Tank

Hardware

Speed brake Installed with servo

PNP Option available +$1895.00

Installed Lights, All servo wires installed, HV Servos with all linkage installed, UAT and Tanks with Fuel lines installed, Complete E-Gear set with brakes, doors, and door servos installed

STANDARD KIT PRICE $3895.00 PLUS SHIPPING.

Please note that the shipping times are estimates and may vary, AUSTARS does not have control over factory production or holidays which may cause extended delivery times. 8-20 weeks build and delivery times, please add 2-3 extra weeks for PNP

Options Meanings:

Scale Light Kit Installed = Installed lights

Painted Center Drop Tank = Drop Tank

Hawk Wing and Stab Case = W/S Case

Hawk Servo Harness Kit = H/Kit

T-ONE MODELS 2.7METER F22 RAPTOR

Length 2.7m

Wingspan 1.95m
Fuel tank capacity 8.4L
Pneumatic landing gear
Dry weight ≈ 19kg

Servo:

15 pcs standard size servo( torque 30~40kg);

Engine 12~16kg*2

Standard F-22 ARF Package:

Painted air-frame, scale 6061 Aluminum CNC Thrust Vector nozzles and gear train, operational slats, operational canopy, scale detailed cockpit, scale painted gear with brakes, gear and doors factory installed with air cylinders, operational missile and bomb bay doors with air cylinders installed, Kevlar fuel tanks with machined aluminum fittings and complete hardware package

Upgrade Options:

• Scale detailed lighting package with programmable controller installed $585.00
• Y-pipe, U.S.A, made 210-260N $795.00
• Long range external wing tanks (2) $225.00

Options Meanings:

Scale detailed lighting package with programmable controller installed = progra controller

Y-pipe, U.S.A, made 210-260N = Y-pipe

Long range external wing tanks (2) = wing tanks

Air Shipping $1595.00 USD, FOR SEA FREIGHT CONTACT TEAM AUSTARS TO GET LOWER COST $450-700 USD

Please note that the shipping times are estimates and may vary, AUSTARS does not have control over factory production or holidays which may cause extended delivery times. 8-20 weeks build and delivery times, please add 2-3 extra weeks for PNP

FOR LOCAL PRICE WITH GST INC, IT INCLUDES INTL FREIGHT COST AND LOCAL GST/BROKER FEE ETC. FOR CUSTOMERS FROM OTHER COUNTRIES, TRY TO CONTACT YOUR LOCAL IMPORTER/DEALER, IF NO LUCK, CONTACT US FOR THE HELP. PRODUCTION NEEDS 6-12 WEEKS AND PLUS 5 WEEKS FREIGHT TO AUSTRALIA OR NZ

PNP Option:

Includes standard F-22 ARF package plus the installed lighting package, 5x Savox SA1256TG or GDW/DUALSKY/JX digital servos, 8x SA1230MG OR GDW/DUALSKY/JX digital monster servos, insulated wire harness with quick connections, air management system with all electronic valves plumed and installed, 1 or 2 KingTech UAT's depending on engine selection, Fuel system plumbing installed

T-ONE MODELS 2.7METER F22 RAPTOR

Length 2.7m

Wingspan 1.95m
Fuel tank capacity 8.4L
Pneumatic landing gear
Dry weight ≈ 19kg

Servo:

15 pcs standard size servo( torque 30~40kg);

Engine 12~16kg*2

Standard F-22 ARF Package:

Painted air-frame, scale 6061 Aluminum CNC Thrust Vector nozzles and gear train, operational slats, operational canopy, scale detailed cockpit, scale painted gear with brakes, gear and doors factory installed with air cylinders, operational missile and bomb bay doors with air cylinders installed, Kevlar fuel tanks with machined aluminum fittings and complete hardware package

Upgrade Options:

• Scale detailed lighting package with programmable controller installed $585.00
• Y-pipe, U.S.A, made 210-260N $795.00
• Long range external wing tanks (2) $225.00

Options Meanings:

Scale detailed lighting package with programmable controller installed = progra controller

Y-pipe, U.S.A, made 210-260N = Y-pipe

Long range external wing tanks (2) = wing tanks

Air Shipping $1595.00 USD, FOR SEA FREIGHT CONTACT TEAM AUSTARS TO GET LOWER COST $450-700 USD

Please note that the shipping times are estimates and may vary, AUSTARS does not have control over factory production or holidays which may cause extended delivery times. 8-20 weeks build and delivery times, please add 2-3 extra weeks for PNP

PNP Option:

Includes standard F-22 ARF package plus the installed lighting package, 5x Savox SA1256TG or GDW/DUALSKY/JX digital servos, 8x SA1230MG OR GDW/DUALSKY/JX digital monster servos, insulated wire harness with quick connections, air management system with all electronic valves plumed and installed, 1 or 2 KingTech UAT's depending on engine selection, Fuel system plumbing installed

T-ONE MODELS MINI HAWK T1

Length 1.9m

Wingspan 1.6m
Fuel tank capacity 2.5L
Electric landing gear
Dry weight ≈ 9kg

Servo:

1 pcs standard size servo( torque 20~30kg);

5 pcs medium size servo( torque 10~16kg);

3 pcs mediium thin size servo( torque 6~11kg)

Engine 6~8.5kg

ARF Kit: INCLUDES:

Any painted scale scheme

E-gear with T-One E-gear controller

Gear installed

Gear door and door servos installed,

Cockpit

Pipe

Kevlar fuel tank, 90 oz

Hinging and control horns installed

Hardware.

Upgraded Options:

Installed lights $145 USD

Painted belly drop tank = Drop Tank $70

Hawk PNP Upgrade = Upgrade

PNP INCLUDES: $790 USD

HV Servos

Wire harness with quick connectors

Installed lights

fuel system plumbed

Kingtech UAT

PRODUCTION TIME AROUND 8-20 WEEKS AND INTL SEA FREIGHT AROUND 4-6 WEEKS

SEA FREIGHT TO WORLDWIDE WHERE NO TONE DEALERS AROUND 6-8 WEEKS $400-600 USD.

VIDEO FILMED BY SALTPRODUCTION TEAM WITH THANKS

T-ONE MODELS 1/7TH SCALE A-10

Length 2.32m

Wingspan 2.5m
Fuel tank capacity 2*2.5L
Electric landing gear
Fly weight ≈ 20kg

Servo:

10 pcs standard size servo( torque 20~30kg);

3 pcs medium size servo( torque 10~16kg);

Engine 8~10kg*2

Standard EDF version A-10 painted ARF includes:

Electric Gear/Brakes

Xicoy LG-15 Gear controller

Operation Canopy

Scale Cockpit

2X EDF Ducting's

Hardware

Upgraded Options meaning:

Installed light kit with Slime Lights = Light kit

Painted ordinance with pylons = Paint Ord

Spinning Gatling gun with controller = Spinning Ga/Gu

Factory Weathering = Factory Wea

A-10-000(Lacquer White Primer Only) = Primer

Standard A-10 painted ARF includes:

Electric Gear/Brakes W TONE NEW CONTROLLER

Hardware

Standard A-10 painted ARF Kit includes:

Electric Gear/Brakes TONE OR Xicoy LG-15 Gear controller

Operation Canopy

Scale Cockpit

Turbo Fans

2X Kevlar Fuel tanks & Fittings

2X Pipes

Hardware

PNP Upgrade includes:

Quan. (15) GDW Digital HV metal gear servos installed

All flight control linkage installed

Servos Wires installed W/Wing quick connections

Fuel system plumbed with 2X Kingtech UAT's

TONE or Xicoy LG-15 landing gear controller installed

Shipping $1,395.00 Air Freight (5-15 days) to Most countries where no local dealers to import

Shipping $400-695.00 by sea container (6-10 weeks) to most countries

FOR LOCAL PRICE WITH GST INC, IT INCLUDES INTL FREIGHT COST AND LOCAL GST/BROKER FEE ETC. FOR CUSTOMERS FROM OTHER COUNTRIES, TRY TO CONTACT YOUR LOCAL IMPORTER/DEALER, IF NO LUCK, CONTACT US FOR THE HELP. PRODUCTION NEEDS 6-12 WEEKS AND PLUS 5 WEEKS FREIGHT TO AUSTRALIA OR NZ

(2)-Large Boxes. 8-10 Weeks for build and Ship.

VIDEO FILMED BY SALTPRODUCTION TEAM WITH THANKS

T-ONE MODELS 1/7TH SCALE A-10

Length 2.32m

Wingspan 2.5m
Fuel tank capacity 2*2.5L
Electric landing gear
Fly weight ≈ 20kg

Servo:

10 pcs standard size servo( torque 20~30kg);

3 pcs medium size servo( torque 10~16kg);

Engine 8~10kg*2

Standard EDF version A-10 painted ARF includes:

Electric Gear/Brakes

Xicoy LG-15 Gear controller

Operation Canopy

Scale Cockpit

2X EDF Ducting's

Hardware

Upgraded Options meaning:

Installed light kit with Slime Lights = Light kit

Painted ordinance with pylons = Paint Ord

Spinning Gatling gun with controller = Spinning Ga/Gu

Factory Weathering = Factory Wea

A-10-000(Lacquer White Primer Only) = Primer

Standard A-10 painted ARF includes:

Electric Gear/Brakes

Hardware

Standard A-10 painted ARF Kit includes:

Electric Gear/Brakes

Xicoy LG-15 Gear controller

Operation Canopy

Scale Cockpit

Turbo Fans

2X Kevlar Fuel tanks & Fittings

2X Pipes

Hardware

PNP Upgrade includes:

Quan. (15) GDW Digital HV metal gear servos installed

All flight control linkage installed

Servos Wires installed W/Wing quick connections

Fuel system plumbed with 2X Kingtech UAT's

Xicoy LG-15 landing gear controller installed

Shipping $1,395.00 Air Freight (5-15 days) to Most countries where no local dealers to import

Shipping $400-695.00 by sea container (6-10 weeks) to most countries

(2)-Large Boxes. 8-10 Weeks for build and Ship.

VIDEOS FILMED BY THE PARTNERS FROM OTHER STATES WITH THANKS!

The T-3 is large and has all the great flight characteristics as the T-1 but bigger, smoother and more docile due to its size. The T-3 is by far one of the most inexpensive 3 meter jets on the market today. Some of the top world class pilots prefer it over other brands due to its cost and flight characteristics.

T-3 Sport Jet like its little brother is built with the same technology, care and precision that you see in all other T-one model products. The construction is comprised of Airex composite sandwich core, Fiberglass, Carbon Fiber and aircraft plywood. The exterior colors are painted and polished to a beautiful finish. The landing gear, wheels and brakes are superior over other brands that just leave you bouncing and skidding across the runway. The T-3 struts are a beautiful design and the Oil over air dampening is smooth and precise without binding. (Great for grass fields) The large Disk brakes make for smooth braking power as well.

T-3 will include Air Retracts with struts, Wheels and brakes (ELECTRIC UPGRADE AVAILABLE) , Pipe, Large Kevlar Split Fuel & Smoke tank and hardware package. (Installed Light Package Optional)

T-3 is available in all of the popular T-1 standard color schemes and our custom color schemes at an extra charge

T-ONE T3 SPORT JET

Length 3m

Wingspan 2.62m
Fuel tank capacity 5.8L
Electric landing gear/ Pneumatic landing gear
Fly weight ≈ 24kg

Servo:

8 pcs standard size servo( torque 30~40kg);

Engine 22~30kg

Basic Specs:

118" Long

103" Wing Span

Fuel Tank 7.57L / 256oz

Smoke Tank 1.8L / 60oz

180-260N Turbine

Jet ARF Version Includes:

T-One Sport Jet externally painted

Air retracts wheels and brakes complete

Air lines and fittings

Split Kevlar fuel/smoke tank W/Fittings

Hardware package tail pipe

Other Information:

Airex / composite laminate skins

Carbon fiber reinforcements

2 piece fuselage

Removable tail fins. bolts have metal inserts to guide your allen wrench

All removable surfaces held with double aluminum clamps

Kevlar fuel/smoke tank (125oz / 35oz)

Landing gear steering servo mounted on front strut

Extremely lightweight

Large pre-hinged control surfaces with factory installed double control horns

Gear doors

Sturdy aluminum wing spar

Many available paint schemes, with custom schemes available

Extensive hardware included in kit

Removable nose cone

Removable wood / carbon fiber nose structure!

Trailing link landing gears (3) Air kit with lines and fittings. NOTE: Air tanks not provided in kit due to shipping regulations

PNP Options:

PNP Option (SAVOX/GDW/DUALSKY/JX Servos) comes with Savox servo package #2, servo wires, linkage connected, fuel systems installed, gear installed and other details completed. $1395.00 USD (THESE BRANDS SERVOS ALL APPROVED BY THE MARKET. TEAM AUSTARS SELECT THE SERVOS FOR YOU)

Standard Color, Complete ARF Version: $4195 USD

Please note that the shipping times are estimates and may vary, TEAM AUSTARS does not have control over factory production or holidays which may cause extended delivery times.

8-12 weeks for build and delivery times, please add an extra 2-3 weeks for PNP

Shipping: $1695.00 Ships in 3 separate large boxes BY AIR EXPRESS

Sea freight is much lower around $470-795 USD CONTACT US TO CONFIRM

Custom Paint Up-Charge $695.00

VIDEOS FILMED BY THE PARTNERS FROM OTHER STATES WITH THANKS!

The T-3 is large and has all the great flight characteristics as the T-1 but bigger, smoother and more docile due to its size. The T-3 is by far one of the most inexpensive 3 meter jets on the market today. Some of the top world class pilots prefer it over other brands due to its cost and flight characteristics.

T-3 Sport Jet like its little brother is built with the same technology, care and precision that you see in all other T-one model products. The construction is comprised of Airex composite sandwich core, Fiberglass, Carbon Fiber and aircraft plywood. The exterior colors are painted and polished to a beautiful finish. The landing gear, wheels and brakes are superior over other brands that just leave you bouncing and skidding across the runway. The T-3 struts are a beautiful design and the Oil over air dampening is smooth and precise without binding. (Great for grass fields) The large Disk brakes make for smooth braking power as well.

T-3 will include Air Retracts with struts, Wheels and brakes (ELECTRIC UPGRADE AVAILABLE) , Pipe, Large Kevlar Split Fuel & Smoke tank and hardware package. (Installed Light Package Optional)

T-3 is available in all of the popular T-1 standard color schemes and our custom color schemes at an extra charge

T-ONE T3 SPORT JET

Length 3m

Wingspan 2.62m
Fuel tank capacity 5.8L
Electric landing gear/ Pneumatic landing gear
Fly weight ≈ 24kg

Servo:

8 pcs standard size servo( torque 30~40kg);

Engine 22~30kg

Basic Specs:

118" Long

103" Wing Span

Fuel Tank 7.57L / 256oz

Smoke Tank 1.8L / 60oz

180-260N Turbine

Jet ARF Version Includes:

T-One Sport Jet externally painted

Air retracts wheels and brakes complete

Air lines and fittings

Split Kevlar fuel/smoke tank W/Fittings

Hardware package tail pipe

Other Information:

Airex / composite laminate skins

Carbon fiber reinforcements

2 piece fuselage

Removable tail fins. bolts have metal inserts to guide your allen wrench

All removable surfaces held with double aluminum clamps

Kevlar fuel/smoke tank (125oz / 35oz)

Landing gear steering servo mounted on front strut

Extremely lightweight

Large pre-hinged control surfaces with factory installed double control horns

Gear doors

Sturdy aluminum wing spar

Many available paint schemes, with custom schemes available

Extensive hardware included in kit

Removable nose cone

Removable wood / carbon fiber nose structure!

Trailing link landing gears (3) Air kit with lines and fittings. NOTE: Air tanks not provided in kit due to shipping regulations

PNP Options:

PNP Option (SAVOX/GDW/DUALSKY/JX Servos) comes with Savox servo package #2, servo wires, linkage connected, fuel systems installed, gear installed and other details completed. $1395.00 USD (THESE BRANDS SERVOS ALL APPROVED BY THE MARKET. TEAM AUSTARS SELECT THE SERVOS FOR YOU)

Standard Color, Complete ARF Version: $4195 USD

Please note that the shipping times are estimates and may vary, TEAM AUSTARS does not have control over factory production or holidays which may cause extended delivery times.

8-12 weeks for build and delivery times, please add an extra 2-3 weeks for PNP

Shipping: $1695.00 Ships in 3 separate large boxes BY AIR EXPRESS

Sea freight is much lower around $470-795 USD CONTACT US TO CONFIRM

Custom Paint Up-Charge $695.00

VIDEOS FILMED BY PARTNERS WORLDWIDE WITH THANKS

The T-One Models 1.7m Mini T-1 jet is a small light weight version of the great T-1 and T-3 Sport Jets. Its designed to fly on K45 to K85 size engines. The 1.7m makes for a great inexpensive (ALL COMPOSITE PAINTED) first time and everyday jet due to its size, stability and cost.

Like its big brothers the 1.7 Mini T-1's are built using Airex composite sandwich core, Fiberglass, Carbon Fiber and aircraft plywood. The exterior colors are painted and polished to a beautiful finish. The kit is complete with Electric Trailing link gear and electric brakes.

T-ONE MINI 1.7M SPORT JET

Length 1.7m

Wingspan 1.48m
Fuel tank capacity 2.5L
Electric landing gear
Fly weight ≈ 9kg

Servo:

8 pcs medium size servo( torque 10~15kg);

Engine 6~8.5kg

Jet ARF Includes:

1.7m T-One Sport Jet externally painted

Factory installed nose door with Titanium gear digital HV door Servo

Electric Gear and brake set with JP E-Gear Controller/Sequencer with Steering Gyro

Fiberglass Fuel Tank 60Oz

Fiberglass Smoke Tank 27oz

Hardware package

Tail pipe

PNP Version:

The PNP upgrade includes everything listed in the standard Kit package plus the following:

All servos, wires and linkage installed

Fuel tanks and system with UAT installed, plumbed and vented

Installed Pipe and hardware

PNP with AccuTORQ 220SG Servos

Standard Color, Complete kit 2125 USD

Custom Paint, Complete Kit 2295 USD

PNP with GDW, DUALSKY, OR JX HV MG Large Torque Servos $1270.00 upgrade in drop down menu.

PNP Version:

The PNP upgrade includes everything listed in the standard Kit package plus the following:

• All servos, wires and linkage installed
• Fuel tanks and system with UAT installed, plumbed and vented
• Installed Pipe and hardware

Add installed smoke system with KT pump in the drop down menu for $225.00

Factory installed nose door with Titanium gear digital HV door Servo

Light Kit package includes:

CONTROLLER/WING TIP NAV LIGHTS/TOP(RED) STROBE LIGHT/BOTTOM (CLEAR) STROBE LIGHT/LANDING LIGHT

Wing Bag & Fuselage Set includes: the bags for both in black color

Shipping $300-475.00 Sea Freight, Approx. 8 Weeks +/- or $600-725.00 Air Freight Approx. 10 Days +/-

Please note that the shipping times are estimates and may vary, AUSTARS does not have control over factory production or holidays which may cause extended delivery times.

8-12 weeks for build and delivery times, please add 2-3 weeks extra for PNP

DHL Shipping $xxx (5-7 Days) after assembly of kit. Please call for DHL shipping arraignments

VIDEOS FILMED BY JACKSONLAM WITH THANKS!

The T-One Models Micro T-1 jet is a smaller and lighter weight version of the great 1.7 T-1 Mini Sport Jet. Its a one peace wing design, tail or center mounted engine and designed to fly on 45 MAX size engine. The Micro T-1 makes for a great inexpensive (ALL COMPOSITE PAINTED) jet. This jet is compact and will address the needs and wants of the pilots that have small spaces to transport and store.

Like its big brothers the Micro T-1's are built using Airex composite sandwich core, Fiberglass, Carbon Fiber and aircraft plywood. The exterior colors are painted and polished to a beautiful finish. The kit is complete with Electric Trailing link gear and electric brakes.

PNP upgrade is $700.00
Includes HV servos installed, UAT installed, tank plumbing, servos extensions all the way to the receiver, landing gear and gear/brake controllers installed

T-ONE MICRO SPORT JET

Length 1.48m

Wingspan 1.34m
Fuel tank capacity 1L
Electric landing gear/ Pneumatic landing gear
Fly weight ≈ 5kg

Servo:

8 pcs micro size servo( torque 5~8kg);

Engine 3~4.5kg

Jet ARF Includes:

Micro T-One Sport Jet externally painted

Factory installed nose door with Titanium gear digital HV door Servo

Electric Gear and brake set with JP OR (Xicoy LG-15 E-Gear) Controller/Sequencer with Steering Gyro.

Fuel Tank 33.81oz

Hardware package

Tail pipe for K-45

Initial setup:

CG 173mm From L/E Root

Elv. 15mm U/D Measure Inboard

Rud. 30mm R/L

Ail. 12mm U/D Measure Outbound

Flaps 20mm Take off / 50mm Landing, Measure Inboard

Crow 5mm Measure Outbound

PNP upgrade is $700.00
Includes HV servos installed, UAT installed, tank plumbing, servos extensions all the way to the receiver, landing gear and gear/brake controllers installed

Complete painted kit $1705.00 USD

Shipping 250-280.00 USD BY AIR .

IN AUSTRALIA, PLEASE REFER TO THE VERSION WITH GST (INTL FREIGHT INCLUDED)

Please note that the shipping times are estimates and may vary,AUSTARS does not have control over factory production or holidays which may cause extended delivery times. Approximately 8-12 weeks for build and ship on standard sport jets, add 2-3 extra weeks for PNP models

Wing and fuselage bag also available.

VIDEOS FILMED BY INTL PARTNERS WITH THANKS

The YAK 130 jet is known for its graceful flying flying style and performance. It's an advanced pilot training aircraft, able to replicate characteristics of Russian 4th and 5th generation fighters.

All these great characteristics show in the T-One models Yak-130. It has great scale features, very light weight, Electric retracts/brakes and a overall great flying jet.

T-ONE MODELS YAK 130 1/5.5 SCALE ARF

Length 2.1m

Wingspan 1.85m
Fuel tank capacity 3.8L
Electric landing gear
Dry weight ≈ 13.5kg

Weight 18 Lbs dry weight, recommended Engine ACE120/JETCAT 120/K120 without ordinance - ACE170/JETCAT 180/K160 With ordinance

Servo:

8 pcs standard size servo( torque 20~30kg);

1 pcs medium size servo( torque 8~20kg);

4 pcs micro size servo( torque 4~5kg)

Engine 12~16kg

Standard YAK-130 ARF Package: $4125 USD

Painted air-frame, scale speed brake installed, detailed Fiberglass scale cockpit, Kevlar tank with fittings, hardware package, pipe, scale painted electric gear/wheels and brakes with Xicoy LG-15 E-Gear Controller/Sequencer with Steering Gyro, gear & doors with servos installed.

Upgraded Options:

Scale light kit installed 13+ lights with programmable controller = Progra Controller $395 USD

Scale painted ordinance package with pylons = Scale painted $595 USD

Wing Bag set $225 USD

PNP version includes ARF & Upgraded options, all HV GDW/DUALSKY/JX large torque servos, wirings, just PNP your own TX/RX & engine-go fly! $3100 USD PNP

Please note that the shipping times are estimates and may vary, AUSTARS does not have control over factory production or holidays which may cause extended delivery times.

8-20 weeks for build and delivery times, please add 2-3 extra weeks for PNP

Developed by Korea Aerospace Industries with Lockheed Martin. The T-50 is South Korea's first indigenous supersonic aircraft and one of the world's few supersonic trainers.

T-One models has developed a beautiful scale model of the T-50. They have applied the superior build design and quality in this model as in all their others. The scale details and functionality are superb along with the flight performance

T-ONE MODELS T-50 1/5TH SCALE JET

Length 2.6m

Wingspan 1.84m
Fuel tank capacity 4.0L
Pneumatic landing gear
Dry weight ≈ 15.5kg

Servo:

4 pcs standard size servo( torque 20~25kg);

4 pcs standard size servo( torque 30~35kg);

Engine 14~18kg

Standard T-50 ARF Package :

Painted air-frame, scale speed brakes installed with cylinders, detailed Fiberglass scale cockpit, operational canopy, Kevlar tanks with fittings, hardware package, pipe, scale painted gear/wheels and brakes, gear & doors with cylinders installed

Options:

Scale light kit installed with programmable controller = Progra Controller

Scale painted ordinance package with pylons, drop tanks and tip missiles = Scale painted

Painted tip missiles = Painted

Wing Bag set

PNP Option #2(AccuTORQ 600SG HV Servos) = AT Servo

T-50 Custom Wire Harness = Wire Harness

Smoke Tank

Complete Smoke system install with Kingtech Smoke Pump = Smoke

Functioning (Turkey Feathers) exhaust nozzle. NOTE: The nozzle is still in development and is for looks only, not AB capable.

PNP Option:

1. SAVOX Servos- Includes the standard package and Lights installed, All servos and linkage installed, 4x SA1256TG Digital Servos, 2x SA-1230MG Digital Servos, All servo wires installed, Complete (FAC-1709U) air system installed, Fuel tanks installed and plumed with KT-UAT, $1995.00

2. GDW/DUALSKY HV Servos- Same option as above with (6) AccuTORQ 600SG HV Premium Servos with Aluminum arms $2295.00

Shipping $1595.00 BY AIR EXPRESS

Sea freight around $500-790 USD to most countries where no T-one importer

Please note that the shipping times are estimates and may vary, AUSTARS does not have control over factory production or holidays which may cause extended delivery times.

8-20 weeks build and delivery times, please add 2-3 extra weeks for PNP

Developed by Korea Aerospace Industries with Lockheed Martin. The T-50 is South Korea's first indigenous supersonic aircraft and one of the world's few supersonic trainers.

T-One models has developed a beautiful scale model of the T-50. They have applied the superior build design and quality in this model as in all their others. The scale details and functionality are superb along with the flight performance

T-ONE MODELS T-50 1/5TH SCALE JET

Length 2.6m

Wingspan 1.84m
Fuel tank capacity 4.0L
Pneumatic landing gear
Dry weight ≈ 15.5kg

Servo:

4 pcs standard size servo( torque 20~25kg);

4 pcs standard size servo( torque 30~35kg);

Engine 14~18kg

Standard T-50 ARF Package :

Painted air-frame, scale speed brakes installed with cylinders, detailed Fiberglass scale cockpit, operational canopy, Kevlar tanks with fittings, hardware package, pipe, scale painted gear/wheels and brakes, gear & doors with cylinders installed

Options:

Scale light kit installed with programmable controller = Progra Controller

Scale painted ordinance package with pylons, drop tanks and tip missiles = Scale painted

Painted tip missiles = Painted

Wing Bag set

PNP Option #2(AccuTORQ 600SG HV Servos) or /DUALSKY HV = AT Servo

T-50 Custom Wire Harness = Wire Harness

Smoke Tank

Complete Smoke system install with Kingtech Smoke Pump = Smoke

Functioning (Turkey Feathers) exhaust nozzle. NOTE: The nozzle is still in development and is for looks only, not AB capable.

PNP Option:

1. SAVOX Servos- Includes the standard package and Lights installed, All servos and linkage installed, 4x SA1256TG Digital Servos, 2x SA-1230MG Digital Servos, All servo wires installed, Complete (FAC-1709U) air system installed, Fuel tanks installed and plumed with KT-UAT, $1995.00

2. GDW/DUALSKY HV Servos- Same option as above with (6) AccuTORQ 600SG HV Premium Servos with Aluminum arms $2295.00

Shipping $1595.00 BY AIR EXPRESS

Sea freight around $500-790 USD to most countries where no T-one importer

Please note that the shipping times are estimates and may vary, AUSTARS does not have control over factory production or holidays which may cause extended delivery times.

8-20 weeks build and delivery times, please add 2-3 extra weeks for PNP

DESCRIPTION

T-One models has developed a beautiful scale model of the J-10A. They have applied the superior build design and quality in this model as in all their others. The scale details and functionality are superb along with the flight performance

Standard J-10A ARF Package this Jet is used by National Aerobatic Team.

Painted air-frame, canopy, flap and brake, Kevlar tanks with fittings, hardware package, pipe, scale painted gear/wheels and brakes, pneumatic landing gear installed.

ARF Pro version includes ARF complete/installed lights/parachute installed/Weathering paint/scale cockpit upgraded/air brakes

PNP Version comes with all large HD torque servos and wirings, powerbox just plug RX/TX, and turbine engine

Length 3.65m

Wingspan 2.17m
Fuel tank capacity 5.5L
Pneumatic landing gear
Dry weight ≈ 20kg

Servo:

8 pcs standard size servo( torque 35~40kg);

Engine 22~26kg

Shipping $1,895.00 Air Freight (5-15 days) to Most countries where no local dealers to import

Shipping $500-895.00 by sea container (6-10 weeks) to most countries

FOR LOCAL PRICE WITH GST INC, IT INCLUDES INTL FREIGHT COST AND LOCAL GST/BROKER FEE ETC. FOR CUSTOMERS FROM OTHER COUNTRIES, TRY TO CONTACT YOUR LOCAL IMPORTER/DEALER, IF NO LUCK, CONTACT US FOR THE HELP. PRODUCTION NEEDS 6-12 WEEKS AND PLUS 5 WEEKS FREIGHT TO AUSTRALIA OR NZ