Features

• *fully resin/glassfiber construction
• *Fuselage in two parts (around 1.8m and 1.6m) for easy transport
• *Wings glassfiber/Airex in separated 3 parts : left wing - right wing - center section
• *Wing Span: 1450mm / 57.8in
• *Length: 3400mm / 133.85in
• *Weight of the fiber parts (without retracts) : 5.1kg / 179.90oz
• *Flying weight with battery 2x6S 8000mah : 11-11.5kg / 388oz
• *Electric retract system
• *Struts fitted for the main wheel of 4 wheels and for the front wheel of 2 wheels (optional)
• *Wheel brakes on two wheels or four wheels per strut (optional)
• *In option: realistic nose section : visor and nose movement in 2 different parts
• *In option: White and black painting of the model as for the real Concorde
• *Flying time: around 5 to 7 minutes with battery 12S (2x6S) 8000mah

Includes

• *HM Modelltechnik Concorde 2x90mm or 2x turbines 1,45m
• *Decals of all windows are included
• *English instruction manual
• *Note: Box size is 180cm x 70 cm x 30 cm and requires a specific delivery method

For EDF option: 2 x90mm EDF + 2 X 120A ESC recommended

Requires

• *2x 90mm EDF and 2x ESC or 2x turbines 6kg/each
• *6x servos (35x15x31mm) for the wings (dimensions ~ 35 x 15 x 31) with a torque of minimum 70 Ncm with metal gear
• 
  
• *1x servo for the steering of the retract
• *Electric landing gear, struts, brakes, wheels (optional)
• *Minimum 6 channels radio and receiver
• *8000mAh Lipo Battery 2x6 cells in serial (12 cells)
• *Lipo Battery Charger 6 cells

*Recommended EDF power set up (see accessories on this page)

• *2x Hacker Stream-fan 90mm EDF / Hacker E50 1.5Y 1070Kv for a thrust of 5.1kg/EDF
• *2x Wemotec Midi Fan evo 90mm EDF / HET 650-68-1130Kv for a thrust of 4.5kg/EDF
• *Other 90mm fans can be easily mounted

*Recommended turbines power set up

• *2x Jetcat P60 turbines or 2 x Ace Swiwin SW60B (requires a mounting by yourself)
• *2x exhaust pipes

Optionnal (see accessories on this page)

Realistic nose movement:

• *Visor and nose movement in 2 different parts
• *Set of 1x programmable servo (30x15x30mm) for the visor with min. torque of 40Ncm and a total mouvement rotation of 180 degrees and 1x standard servo for the nose with min. torque of 90Ncm

Standard Painting:

• *White painting of total fuselage of the model (without visible joints). The kit is delivered white and the joint of the fuselage is visible. The optional painting service includes the painting of the fuselage (no joint visible) and the painting of the intakes and half of the nozzles black like the real Concorde.
• *Black painting of the intakes and half of the nozzles like for real Concorde
• In standard delivery is only decals for the windows, There is no livery decals

Superior Painting - Special livery painting:

• *The kit comes by default with a set of decals but can be on demand painted to any existing livery.
•