PACKAGE INCLUDES

4 X EDF WITH MOTOR IN CCW

4 X ESC 160A OPTO

AIR FREIGHT FOR THAI TEAM

TEST FOR LEADING TIME: 5 DAYS

===============================================

DATA SHEET

Length (mm):	80mm (without motor / Cone)
Weight (gr):	550 gr (with motor)
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm):	105
EDF Outside Diameter (mm):	107 mm
EDF Inner Diameter (mm) :	105 mm
Exit Air Diameter (EDF):	105 mm
Rotor Diameter (mm):	104.5 mm
Blades:	12
Stators:	8
Turbine shroud	Metal
EDF Rotor	Metal
Power System	MT-4250-12S
No. of Magnet Poles:	12
Turns/min/Volt (Kv):	875 Kv
Motor Type:	Out-Runner
Motor Diameter (mm):	50 mm
Shaft diameter (mm):	8
Battery Cells:	12s - 44.4v
Connection:	PK 5.5mm

MORE INFO

105mm + 12S EDF Ducted Fan Motor 875KV (CCW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 12s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Note: For a better motor heat dissipation, the manufacturer does not recommend the usage of the motor cone cover wiht the most powerful setups. If you decide to use it, please always make sure to check the motor temperature is not excessive after the first flights.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	12s (44.4v)	12s (48.0v)
Thrust:	6.5 kg	7.5 kg
Current:	114 A	130 A
Power:	4528 W	5280 W
Recommended ESC:	130 A / HV	150 A / HV
Recommended battery:	5000mAh 40C	5000mAh 40C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Additional measurements with 12s (50.1v):

• 1kg : 9A
• 2kg : 21A
• 3kg : 35A

Specifications

• Special high grade aluminum quality
• Motor Kv: 875
• Motor: MT-4250-12S (6mm axle) Outrunner 12 poles
• Motor diameter: 42mm
• Motor length: 50mm
• Rotor: 105mm 12 blades aluminium
• External diameter: 107mm
• Internal diameter: 105mm
• Inlet ring diameter: 123mm (removable)
• Ejection diameter: 105 mm
• Combo max thrust: 7.5Kg
• Weight: 550g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 75600
• Speed Control Advanced Timing Setting: 15° and under
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 12s 105mm full metal EDF unit

DATA SHEET

Length (mm):	80mm (without motor / Cone)
Weight (gr):	695 gr (with motor)
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CW)
EDF Diameter Class (mm):	120
EDF Outside Diameter (mm):	123 mm
EDF Inner Diameter (mm) :	120 mm
Exit Air Diameter (EDF):	120 mm
Rotor Diameter (mm):	120 mm
Blades:	12
Stators:	8
Turbine shroud	Metal
EDF Rotor	Metal
Power System	JP 5050-?
No. of Magnet Poles:	12
Turns/min/Volt (Kv):	510 kV
Motor Type:	Out-Runner
Motor Diameter (mm):	50 mm
Shaft diameter (mm):	8
Electronic Speed Control	JP Hobby 180A 6-22S OPTO
Battery Cells:	18s - 66.6v
Connection:	PK 5.5mm

MORE INFO

120mm + 18S EDF Ducted Fan Motor 510KV (CW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 18s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	18s (75.6v)	18s (78.3v)
Thrust:	10.3 kg	10.8 kg
Current:	116 A	123 A
Power:	8769 W	9631 W
Recommended ESC:	150 A / HV	150 A / HV
Min recommended battery:	5000mAh 40C	5000mAh 40C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Specifications

• Special high grade aluminum quality
• Motor Kv: 510
• Motor: 5050 -18S (8mm axle) Outrunner 12 poles
• Motor diameter: 42mm
• Motor length: 50mm
• Rotor: 120mm 12 blades aluminium
• External diameter: 123mm
• Internal diameter: 120mm
• Inlet ring diameter: 136mm (removable)
• Ejection diameter: 120 mm
• Combo max thrust: 10.8Kg
• Weight: 693g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 82000
• Speed Control Advanced Timing Setting: 15° and under
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 18s 120mm full metal EDF unit
• Contact plugs

DATA SHEET

Length (mm):	80mm (without motor / Cone)
Weight (gr):	695 gr (with motor)
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm):	120
EDF Outside Diameter (mm):	123 mm
EDF Inner Diameter (mm) :	120 mm
Exit Air Diameter (EDF):	120 mm
Rotor Diameter (mm):	120 mm
Blades:	12
Stators:	8
Turbine shroud	Metal
EDF Rotor	Metal
Power System	JP 5050-?
No. of Magnet Poles:	12
Turns/min/Volt (Kv):	510 kV
Motor Type:	Out-Runner
Motor Diameter (mm):	50 mm
Shaft diameter (mm):	8
Electronic Speed Control	JP Hobby 180A 6-22S OPTO
Battery Cells:	18s - 66.6v
Connection:	PK 5.5mm

MORE INFO

120mm + 18S EDF Ducted Fan Motor 510KV (CCW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 18s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	18s (75.6v)	18s (78.3v)
Thrust:	10.3 kg	10.8 kg
Current:	116 A	123 A
Power:	8769 W	9631 W
Recommended ESC:	150 A / HV	150 A / HV
Min recommended battery:	5000mAh 40C	5000mAh 40C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Specifications

• Special high grade aluminum quality
• Motor Kv: 510
• Motor: 5050 -18S (8mm axle) Outrunner 12 poles
• Motor diameter: 42mm
• Motor length: 50mm
• Rotor: 120mm 12 blades aluminium
• External diameter: 123mm
• Internal diameter: 120mm
• Inlet ring diameter: 136mm (removable)
• Ejection diameter: 120 mm
• Combo max thrust: 10.8Kg
• Weight: 693g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 82000
• Speed Control Advanced Timing Setting: 15° and under
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 18s 120mm full metal EDF unit
• Contact plugs

DATA SHEET

Length (mm):	80mm (without motor / Cone)
Weight (gr):	550 gr (avec moteur)
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CW)
EDF Diameter Class (mm):	120
EDF Outside Diameter (mm):	123 mm
EDF Inner Diameter (mm) :	120 mm
Exit Air Diameter (EDF):	120 mm
Rotor Diameter (mm):	120 mm
Blades:	12
Stators:	8
Turbine shroud	Metal
EDF Rotor	Metal
Power System	JP 4250-?-560kv
No. of Magnet Poles:	12
Turns/min/Volt (Kv):	560 Kv
Motor Type:	Out-Runner
Motor Diameter (mm):	42 mm
Shaft diameter (mm):	8
Battery Cells:	15s - 55.5v
Connection:	PK 5.5mm

MORE INFO

120mm + 15S EDF Ducted Fan Motor 560KV (CW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 15s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	15s 63.0v)
Thrust:	9.3 kg
Current:	110 A
Power:	6930 W
Recommended ESC:	120 A / HV
Recommended battery:	4500mAh 40C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Specifications

• Special high grade aluminum quality
• Motor Kv: 560
• Motor: MT-4250-VI-560kv-15S (8mm axle) Outrunner 12 poles
• Motor diameter: 42mm
• Motor length: 50mm
• Rotor: 120mm 12 blades aluminium
• External diameter: 123mm
• Internal diameter: 120mm
• Inlet ring diameter: 136mm (removable)
• Ejection diameter: 120 mm
• Combo max thrust: 9.3Kg
• Weight: 550g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 75600
• Speed Control Advanced Timing Setting: 15° and under
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 15s 120mm full metal EDF unit (CCW)
• Connectors 6mm

DATA SHEET

Length (mm):	80mm (without motor / Cone)
Weight (gr):	550 gr (avec moteur)
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm):	120
EDF Outside Diameter (mm):	123 mm
EDF Inner Diameter (mm) :	120 mm
Exit Air Diameter (EDF):	120 mm
Rotor Diameter (mm):	120 mm
Blades:	12
Stators:	8
Turbine shroud	Metal
EDF Rotor	Metal
Power System	JP 4250-?-560kv
No. of Magnet Poles:	12
Turns/min/Volt (Kv):	560 Kv
Motor Type:	Out-Runner
Motor Diameter (mm):	42 mm
Shaft diameter (mm):	8
Battery Cells:	15s - 55.5v
Connection:	PK 5.5mm

MORE INFO

120mm + 15S EDF Ducted Fan Motor 560KV (CCW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 15s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	15s 63.0v)
Thrust:	9.3 kg
Current:	110 A
Power:	6930 W
Recommended ESC:	120 A / HV
Recommended battery:	4500mAh 40C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Specifications

• Special high grade aluminum quality
• Motor Kv: 560
• Motor: MT-4250-VI-560kv-15S (8mm axle) Outrunner 12 poles
• Motor diameter: 42mm
• Motor length: 50mm
• Rotor: 120mm 12 blades aluminium
• External diameter: 123mm
• Internal diameter: 120mm
• Inlet ring diameter: 136mm (removable)
• Ejection diameter: 120 mm
• Combo max thrust: 9.3Kg
• Weight: 550g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 75600
• Speed Control Advanced Timing Setting: 15° and under
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 15s 120mm full metal EDF unit (CCW)
• Connectors 6mm

DATA SHEET

Length (mm):	80mm (without motor / Cone)
Weight (gr):	695 gr (with motor)
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CW)
EDF Diameter Class (mm):	120
EDF Outside Diameter (mm):	123 mm
EDF Inner Diameter (mm) :	120 mm
Exit Air Diameter (EDF):	120 mm
Rotor Diameter (mm):	120 mm
Blades:	12
Stators:	8
Turbine shroud	Metal
EDF Rotor	Metal
Power System	JP 5050-?
No. of Magnet Poles:	12
Turns/min/Volt (Kv):	673 Kv
Motor Type:	Out-Runner
Motor Diameter (mm):	50 mm
Shaft diameter (mm):	8
Battery Cells:	14s - 51.8v
Connection:	PK 5.5mm

MORE INFO

120mm + 14S EDF Ducted Fan Motor 673KV (CW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 14s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	14s (51.8v)	14s (56.0v)	14s (58.1v)
Thrust:	8.0 kg	9.2 kg	9.8 kg
Current:	107 A	123 A	133 A
Power:	5542 W	6888 W	7727 W
Recommended ESC:	150 A / HV	150 A / HV	160 A / HV
Recommended battery:	5000mAh 40C	5000mAh 40C	6000mAh 40C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Specifications

• Special high grade aluminum quality
• Motor Kv: 673
• Motor: MT-5050-14S (8mm axle) Outrunner 12 poles
• Motor diameter: 42mm
• Motor length: 50mm
• Rotor: 120mm 12 blades aluminium
• External diameter: 123mm
• Internal diameter: 120mm
• Inlet ring diameter: 136mm (removable)
• Ejection diameter: 120 mm
• Combo max thrust: 9.8 kg
• Weight: 693g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 82000
• Speed Control Advanced Timing Setting: 15° and under
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 14s 120mm full metal EDF unit (CCW)

DATA SHEET

Length (mm):	80mm (without motor / Cone)
Weight (gr):	695 gr (with motor)
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm):	120
EDF Outside Diameter (mm):	123 mm
EDF Inner Diameter (mm) :	120 mm
Exit Air Diameter (EDF):	120 mm
Rotor Diameter (mm):	120 mm
Blades:	12
Stators:	8
Turbine shroud	Metal
EDF Rotor	Metal
Power System	JP 5050-?
No. of Magnet Poles:	12
Turns/min/Volt (Kv):	673 Kv
Motor Type:	Out-Runner
Motor Diameter (mm):	50 mm
Shaft diameter (mm):	8
Battery Cells:	14s - 51.8v
Connection:	PK 5.5mm

MORE INFO

120mm + 14S EDF Ducted Fan Motor 673KV (CCW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 14s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	14s (51.8v)	14s (56.0v)	14s (58.1v)
Thrust:	8.0 kg	9.2 kg	9.8 kg
Current:	107 A	123 A	133 A
Power:	5542 W	6888 W	7727 W
Recommended ESC:	150 A / HV	150 A / HV	160 A / HV
Recommended battery:	5000mAh 40C	5000mAh 40C	6000mAh 40C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Specifications

• Special high grade aluminum quality
• Motor Kv: 673
• Motor: MT-5050-14S (8mm axle) Outrunner 12 poles
• Motor diameter: 42mm
• Motor length: 50mm
• Rotor: 120mm 12 blades aluminium
• External diameter: 123mm
• Internal diameter: 120mm
• Inlet ring diameter: 136mm (removable)
• Ejection diameter: 120 mm
• Combo max thrust: 9.8 kg
• Weight: 693g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 82000
• Speed Control Advanced Timing Setting: 15° and under
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 14s 120mm full metal EDF unit (CCW)

DATA SHEET

Length (mm):	80mm (without motor / Cone)
Weight (gr):	695 gr (with motor)
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CW)
EDF Diameter Class (mm):	120
EDF Outside Diameter (mm):	123 mm
EDF Inner Diameter (mm) :	120 mm
Exit Air Diameter (EDF):	120 mm
Rotor Diameter (mm):	120 mm
Blades:	12
Stators:	8
Turbine shroud	Metal
EDF Rotor	Metal
Power System	JP 5050-?
No. of Magnet Poles:	12
Turns/min/Volt (Kv):	760 Kv
Motor Type:	Out-Runner
Motor Diameter (mm):	50 mm
Shaft diameter (mm):	8
Max Intensity (A):	130 A
Battery Cells:	12s - 44.4v
Working voltage (Volts):	44.4 / 12s
Connection:	PK 5.5mm

MORE INFO

120mm + 12S EDF Ducted Fan Motor 760KV (CW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 12s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	12s (44.4v)	12s (48.0v)	12s (50.4v
Thrust:	7.5 kg	8.62 kg	9.23
Current:	112 A	127 A	142 A
Power:	4972 W	6096 W	7156 W
Recommended ESC:	150 A / HV	150 A / HV	170 A / HV
Recommended battery:	5000mAh 40C	5000mAh 40C	6000mAh 40C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Specifications

• Special high grade aluminum quality
• Motor Kv: 760
• Motor: MT-5050-12S (8mm axle) Outrunner 12 poles
• Motor diameter: 42mm
• Motor length: 50mm
• Rotor: 120mm 12 blades aluminium
• External diameter: 123mm
• Internal diameter: 120mm
• Inlet ring diameter: 136mm (removable)
• Ejection diameter: 120 mm
• Combo max thrust: 9.23Kg
• Weight: 693g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 82000
• Speed Control Advanced Timing Setting: 15° and under
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 12s 120mm full metal EDF unit
  

DATA SHEET

Length (mm):	80mm (without motor / Cone)
Weight (gr):	695 gr (with motor)
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm):	120
EDF Outside Diameter (mm):	123 mm
EDF Inner Diameter (mm) :	120 mm
Exit Air Diameter (EDF):	120 mm
Rotor Diameter (mm):	120 mm
Blades:	12
Stators:	8
Turbine shroud	Metal
EDF Rotor	Metal
Power System	JP 5050-?
No. of Magnet Poles:	12
Turns/min/Volt (Kv):	760 Kv
Motor Type:	Out-Runner
Motor Diameter (mm):	50 mm
Shaft diameter (mm):	8
Max Intensity (A):	130 A
Battery Cells:	12s - 44.4v
Working voltage (Volts):	44.4 / 12s
Connection:	PK 5.5mm

MORE INFO

120mm + 12S EDF Ducted Fan Motor 760KV (CCW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 12s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	12s (44.4v)	12s (48.0v)	12s (50.4v
Thrust:	7.5 kg	8.62 kg	9.23
Current:	112 A	127 A	142 A
Power:	4972 W	6096 W	7156 W
Recommended ESC:	150 A / HV	150 A / HV	170 A / HV
Recommended battery:	5000mAh 40C	5000mAh 40C	6000mAh 40C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Specifications

• Special high grade aluminum quality
• Motor Kv: 760
• Motor: MT-5050-12S (8mm axle) Outrunner 12 poles
• Motor diameter: 42mm
• Motor length: 50mm
• Rotor: 120mm 12 blades aluminium
• External diameter: 123mm
• Internal diameter: 120mm
• Inlet ring diameter: 136mm (removable)
• Ejection diameter: 120 mm
• Combo max thrust: 9.23Kg
• Weight: 693g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 82000
• Speed Control Advanced Timing Setting: 15° and under
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 12s 120mm full metal EDF unit
  

DATA SHEET

Length (mm):	80mm (without motor / Cone)
Weight (gr):	620 gr (with motor)
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CW)
EDF Diameter Class (mm):	120
EDF Outside Diameter (mm):	123 mm
EDF Inner Diameter (mm) :	120 mm
Exit Air Diameter (EDF):	120 mm
Rotor Diameter (mm):	120 mm
Blades:	12
Stators:	8
Turbine shroud	Metal
EDF Rotor	Metal
Power System	JP 4250-?
No. of Magnet Poles:	12
Turns/min/Volt (Kv):	840 Kv
Motor Type:	Out-Runner
Motor Diameter (mm):	50 mm
Shaft diameter (mm):	8
Battery Cells:	10s - 37v
Connection:	PK 5.5mm

MORE INFO

120mm + 10S EDF Ducted Fan Motor 840KV (CW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 10s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	10s (37.0v)	10s (42.0v)	10s (43.5v)
Thrust:	5.4 kg	6.1 kg	7.4 kg
Current:	112 A	96 A	118 A
Power:	3763 W	4838 W	5947 W
Recommended ESC:	150 A / HV	150 A / HV	150A / HV
Min. recommended liPo:	5000mAh 40C	5000mAh 40C	6000mAh 40C

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Specifications

• Special high grade aluminum quality
• Motor Kv: 840
• Motor: MT-4250-12S (8mm axle) Outrunner 12 poles
• Motor diameter: 50mm
• Motor length: 60mm
• Rotor: 120mm 12 blades aluminium
• External diameter: 123mm
• Internal diameter: 120mm
• Inlet ring diameter: 136mm (removable)
• Ejection diameter: 120 mm
• Combo max thrust: 7.4Kg
• Weight: 620g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 75600 tours/min
• Speed Control Advanced Timing Setting: 15° and under
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 10s 120mm full metal EDF unit (CCW)
• Connectors

DATA SHEET

Length (mm):	80mm (without motor / Cone)
Weight (gr):	620 gr (with motor)
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm):	120
EDF Outside Diameter (mm):	123 mm
EDF Inner Diameter (mm) :	120 mm
Exit Air Diameter (EDF):	120 mm
Rotor Diameter (mm):	120 mm
Blades:	12
Stators:	8
Turbine shroud	Metal
EDF Rotor	Metal
Power System	JP 4250-?
No. of Magnet Poles:	12
Turns/min/Volt (Kv):	840 Kv
Motor Type:	Out-Runner
Motor Diameter (mm):	50 mm
Shaft diameter (mm):	8
Battery Cells:	10s - 37v
Connection:	PK 5.5mm

MORE INFO

120mm + 10S EDF Ducted Fan Motor 840KV (CCW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 10s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	10s (37.0v)	10s (42.0v)	10s (43.5v)
Thrust:	5.4 kg	6.1 kg	7.4 kg
Current:	112 A	96 A	118 A
Power:	3763 W	4838 W	5947 W
Recommended ESC:	150 A / HV	150 A / HV	150A / HV
Min. recommended liPo:	5000mAh 40C	5000mAh 40C	6000mAh 40C

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Specifications

• Special high grade aluminum quality
• Motor Kv: 840
• Motor: MT-4250-12S (8mm axle) Outrunner 12 poles
• Motor diameter: 50mm
• Motor length: 60mm
• Rotor: 120mm 12 blades aluminium
• External diameter: 123mm
• Internal diameter: 120mm
• Inlet ring diameter: 136mm (removable)
• Ejection diameter: 120 mm
• Combo max thrust: 7.4Kg
• Weight: 620g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 75600 tours/min
• Speed Control Advanced Timing Setting: 15° and under
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 10s 120mm full metal EDF unit (CCW)
• Connectors

DATA SHEET

Length (mm):	80mm (without motor / Cone)
Weight (gr):	550 gr (with motor)
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CW)
EDF Diameter Class (mm):	105
EDF Outside Diameter (mm):	107 mm
EDF Inner Diameter (mm) :	105 mm
Exit Air Diameter (EDF):	105 mm
Rotor Diameter (mm):	104.5 mm
Blades:	12
Stators:	8
Turbine shroud	Metal
EDF Rotor	Metal
Power System	MT-4250-8S
No. of Magnet Poles:	12
Turns/min/Volt (Kv):	1150 Kv
Motor Type:	Out-Runner
Motor Diameter (mm):	50 mm
Shaft diameter (mm):	8
Battery Cells:	8s - 29.6v
Connection:	PK 5.5mm

MORE INFO

105mm + 8S EDF Ducted Fan Motor 1150KV (CW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 8s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Note: For a better motor heat dissipation, the manufacturer does not recommend the usage of the motor cone cover wiht the most powerful setups. If you decide to use it, please always make sure to check the motor temperature is not excessive after the first flights.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	8s (29.6v)	8s (30.0v)	8s (32v)
Thrust:	5.0 kg	5.4 kg	5.8 kg
Current:	119 A	125 A	134 A
Power:	3522 W	3763 W	4288 W
Recommended ESC:	150 A / HV	150 A / HV	160 A / HV
Recommended battery:	5000mAh 40C	5000mAh 40C	5000mAh 40C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Specifications

• Special high grade aluminum quality
• Motor Kv: 1150
• Motor: MT-4250-8S (6mm axle) Outrunner 12 poles
• Motor diameter: 42mm
• Motor length: 50mm
• Rotor: 105mm 12 blades aluminium
• External diameter: 107mm
• Internal diameter: 105mm
• Inlet ring diameter: 123mm (removable)
• Ejection diameter: 105 mm
• Combo max thrust: 5.8Kg
• Weight: 550g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 75600
• Speed Control Advanced Timing Setting: 15° and under
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 8s 105mm full metal EDF unit

DATA SHEET

Length (mm):	80mm (without motor / Cone)
Weight (gr):	550 gr (with motor)
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm):	105
EDF Outside Diameter (mm):	107 mm
EDF Inner Diameter (mm) :	105 mm
Exit Air Diameter (EDF):	105 mm
Rotor Diameter (mm):	104.5 mm
Blades:	12
Stators:	8
Turbine shroud	Metal
EDF Rotor	Metal
Power System	MT-4250-8S
No. of Magnet Poles:	12
Turns/min/Volt (Kv):	1150 Kv
Motor Type:	Out-Runner
Motor Diameter (mm):	50 mm
Shaft diameter (mm):	8
Battery Cells:	8s - 29.6v
Connection:	PK 5.5mm

MORE INFO

105mm + 8S EDF Ducted Fan Motor 1150KV (CCW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 8s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Note: For a better motor heat dissipation, the manufacturer does not recommend the usage of the motor cone cover wiht the most powerful setups. If you decide to use it, please always make sure to check the motor temperature is not excessive after the first flights.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	8s (29.6v)	8s (30.0v)	8s (32v)
Thrust:	5.0 kg	5.4 kg	5.8 kg
Current:	119 A	125 A	134 A
Power:	3522 W	3763 W	4288 W
Recommended ESC:	150 A / HV	150 A / HV	160 A / HV
Recommended battery:	5000mAh 40C	5000mAh 40C	5000mAh 40C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Specifications

• Special high grade aluminum quality
• Motor Kv: 1150
• Motor: MT-4250-8S (6mm axle) Outrunner 12 poles
• Motor diameter: 42mm
• Motor length: 50mm
• Rotor: 105mm 12 blades aluminium
• External diameter: 107mm
• Internal diameter: 105mm
• Inlet ring diameter: 123mm (removable)
• Ejection diameter: 105 mm
• Combo max thrust: 5.8Kg
• Weight: 550g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 75600
• Speed Control Advanced Timing Setting: 15° and under
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 8s 105mm full metal EDF unit

DATA SHEET

Length (mm):	80mm (without motor / Cone)
Weight (gr):	542gr (with motor)
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CW)
EDF Diameter Class (mm):	105
EDF Outside Diameter (mm):	107 mm
EDF Inner Diameter (mm) :	105 mm
Exit Air Diameter (EDF):	105 mm
Rotor Diameter (mm):	104.5 mm
Blades:	12
Stators:	8
Turbine shroud	Metal
EDF Rotor	Metal
Power System	MT-4250-14S
No. of Magnet Poles:	12
Turns/min/Volt (Kv):	840 Kv
Motor Type:	Out-Runner
Motor Diameter (mm):	50 mm
Shaft diameter (mm):	6
Battery Cells:	14s - 51.8v
Connection:	PK 5.5mm

MORE INFO

105mm + 14S EDF Ducted Fan Motor 840KV (CW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 14s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Note: For a better motor heat dissipation, the manufacturer does not recommend the usage of the motor cone cover wiht the most powerful setups. If you decide to use it, please always make sure to check the motor temperature is not excessive after the first flights.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Mesures

Description / LiPo	14s (51.8v)	14s (56.0v)	14s (58.8v)
Thrust:	6.5 kg	7.5 kg	8.5 kg
Current:	100 A	113 A	124 A
Power:	5180 W	6328 W	7291 W
Recommended ESC:	120 A / HV	125 A / HV	150A / HV
Min Recommended LiPo	5000mAh 40C	5000mAh 40C	5000mAh 40C

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Specifications

• Special high grade aluminum quality
• Motor Kv: 840
• Motor: 4250-VI-840kv-14S (6mm axle) Outrunner 12 poles
• Motor diameter: 42mm
• Motor length: 50mm
• Rotor: 105mm 12 blades aluminium
• External diameter: 107mm
• Internal diameter: 105mm
• Inlet ring diameter: 123mm (removable)
• Ejection diameter: 105 mm
• Combo max thrust: 8.5kg
• Weight: 542g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 88.000
• Speed Control Advanced Timing Setting: 15° and under
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 14s 105mm full metal EDF unit CW
• Connectors

DATA SHEET

Length (mm):	80mm (without motor / Cone)
Weight (gr):	542gr (with motor)
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm):	105
EDF Outside Diameter (mm):	107 mm
EDF Inner Diameter (mm) :	105 mm
Exit Air Diameter (EDF):	105 mm
Rotor Diameter (mm):	104.5 mm
Blades:	12
Stators:	8
Turbine shroud	Metal
EDF Rotor	Metal
Power System	MT-4250-14S
No. of Magnet Poles:	12
Turns/min/Volt (Kv):	840 Kv
Motor Type:	Out-Runner
Motor Diameter (mm):	50 mm
Shaft diameter (mm):	6
Battery Cells:	14s - 51.8v
Connection:	PK 5.5mm

MORE INFO

105mm + 14S EDF Ducted Fan Motor 840KV (CCW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 14s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Note: For a better motor heat dissipation, the manufacturer does not recommend the usage of the motor cone cover wiht the most powerful setups. If you decide to use it, please always make sure to check the motor temperature is not excessive after the first flights.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Mesures

Description / LiPo	14s (51.8v)	14s (56.0v)	14s (58.8v)
Thrust:	6.5 kg	7.5 kg	8.5 kg
Current:	100 A	113 A	124 A
Power:	5180 W	6328 W	7291 W
Recommended ESC:	120 A / HV	125 A / HV	150A / HV
Min Recommended LiPo	5000mAh 40C	5000mAh 40C	5000mAh 40C

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Specifications

• Special high grade aluminum quality
• Motor Kv: 840
• Motor: 4250-VI-840kv-14S (6mm axle) Outrunner 12 poles
• Motor diameter: 42mm
• Motor length: 50mm
• Rotor: 105mm 12 blades aluminium
• External diameter: 107mm
• Internal diameter: 105mm
• Inlet ring diameter: 123mm (removable)
• Ejection diameter: 105 mm
• Combo max thrust: 8.5kg
• Weight: 542g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 88.000
• Speed Control Advanced Timing Setting: 15° and under
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 14s 105mm full metal EDF unit CW
• Connectors

DATA SHEET

Length (mm):	80mm (without motor / Cone)
Weight (gr):	550 gr (with motor)
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm):	105
EDF Outside Diameter (mm):	107 mm
EDF Inner Diameter (mm) :	105 mm
Exit Air Diameter (EDF):	105 mm
Rotor Diameter (mm):	104.5 mm
Blades:	12
Stators:	8
Turbine shroud	Metal
EDF Rotor	Metal
Power System	MT-4250-12S
No. of Magnet Poles:	12
Turns/min/Volt (Kv):	875 Kv
Motor Type:	Out-Runner
Motor Diameter (mm):	50 mm
Shaft diameter (mm):	8
Battery Cells:	12s - 44.4v
Connection:	PK 5.5mm

MORE INFO

105mm + 12S EDF Ducted Fan Motor 875KV (CCW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 12s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Note: For a better motor heat dissipation, the manufacturer does not recommend the usage of the motor cone cover wiht the most powerful setups. If you decide to use it, please always make sure to check the motor temperature is not excessive after the first flights.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	12s (44.4v)	12s (48.0v)
Thrust:	6.5 kg	7.5 kg
Current:	114 A	130 A
Power:	4528 W	5280 W
Recommended ESC:	130 A / HV	150 A / HV
Recommended battery:	5000mAh 40C	5000mAh 40C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Additional measurements with 12s (50.1v):

• 1kg : 9A
• 2kg : 21A
• 3kg : 35A

Specifications

• Special high grade aluminum quality
• Motor Kv: 875
• Motor: MT-4250-12S (6mm axle) Outrunner 12 poles
• Motor diameter: 42mm
• Motor length: 50mm
• Rotor: 105mm 12 blades aluminium
• External diameter: 107mm
• Internal diameter: 105mm
• Inlet ring diameter: 123mm (removable)
• Ejection diameter: 105 mm
• Combo max thrust: 7.5Kg
• Weight: 550g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 75600
• Speed Control Advanced Timing Setting: 15° and under
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 12s 105mm full metal EDF unit

DATA SHEET

Length (mm):	80mm (without motor / Cone)
Weight (gr):	550 gr (with motor)
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CW)
EDF Diameter Class (mm):	105
EDF Outside Diameter (mm):	107 mm
EDF Inner Diameter (mm) :	105 mm
Exit Air Diameter (EDF):	105 mm
Rotor Diameter (mm):	104.5 mm
Blades:	12
Stators:	8
Turbine shroud	Metal
EDF Rotor	Metal
Power System	MT-4250-12S
No. of Magnet Poles:	12
Turns/min/Volt (Kv):	875 Kv
Motor Type:	Out-Runner
Motor Diameter (mm):	50 mm
Shaft diameter (mm):	8
Battery Cells:	12s - 44.4v
Connection:	PK 5.5mm

MORE INFO

105mm + 12S EDF Ducted Fan Motor 875KV (CW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 12s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Note: For a better motor heat dissipation, the manufacturer does not recommend the usage of the motor cone cover wiht the most powerful setups. If you decide to use it, please always make sure to check the motor temperature is not excessive after the first flights.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	12s (44.4v)	12s (48.0v)
Thrust:	6.5 kg	7.5 kg
Current:	114 A	130 A
Power:	4528 W	5280 W
Recommended ESC:	130 A / HV	150 A / HV
Recommended battery:	5000mAh 40C	5000mAh 40C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Additional measurements with 12s (50.1v):

• 1kg : 9A
• 2kg : 21A
• 3kg : 35A

Specifications

• Special high grade aluminum quality
• Motor Kv: 875
• Motor: MT-4250-12S (6mm axle) Outrunner 12 poles
• Motor diameter: 42mm
• Motor length: 50mm
• Rotor: 105mm 12 blades aluminium
• External diameter: 107mm
• Internal diameter: 105mm
• Inlet ring diameter: 123mm (removable)
• Ejection diameter: 105 mm
• Combo max thrust: 7.5Kg
• Weight: 550g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 75600
• Speed Control Advanced Timing Setting: 15° and under
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 12s 105mm full metal EDF unit

DATA SHEET

Length (mm):	80mm (without motor / Cone)
Weight (gr):	550 gr (with motor)
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CW)
EDF Diameter Class (mm):	105
EDF Outside Diameter (mm):	107 mm
EDF Inner Diameter (mm) :	105 mm
Exit Air Diameter (EDF):	105 mm
Rotor Diameter (mm):	104.5 mm
Blades:	12
Stators:	8
Turbine shroud	Metal
EDF Rotor	Metal
Power System	MT-4250-10S
No. of Magnet Poles:	12
Turns/min/Volt (Kv):	1000 Kv
Motor Type:	Out-Runner
Motor Diameter (mm):	50 mm
Shaft diameter (mm):	8
Battery Cells:	10s - 37v
Connection:	PK 5.5mm

MORE INFO

105mm + 10S EDF Ducted Fan Motor 1000KV (CW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 10s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Note: For a better motor heat dissipation, the manufacturer does not recommend the usage of the motor cone cover wiht the most powerful setups. If you decide to use it, please always make sure to check the motor temperature is not excessive after the first flights.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	10s (39.0v)	10s (40.0v)	10s (41.6v)
Thrust:	6.2 kg	6.4 kg	6.8 kg
Current:	112 A	117 A	125 A
Power:	4368 W	4680 W	5200 W
Recommended ESC:	130 A / HV	130 A / HV	150 A / HV
Recommended battery:	5000mAh 40C	5000mAh 40C	5000mAh 40C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Specifications

• Special high grade aluminum quality
• Motor Kv: 1000
• Motor: MT-4250-10S (6mm axle) Outrunner 12 poles
• Motor diameter: 42mm
• Motor length: 50mm
• Rotor: 105mm 12 blades aluminium
• External diameter: 107mm
• Internal diameter: 105mm
• Inlet ring diameter: 123mm (removable)
• Ejection diameter: 105 mm
• Combo max thrust: 6.8Kg
• Weight: 550g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 75600
• Speed Control Advanced Timing Setting: 15° and under
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 10s 105mm full metal EDF unit

DATA SHEET

Length (mm):	80mm (without motor / Cone)
Weight (gr):	550 gr (with motor)
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm):	105
EDF Outside Diameter (mm):	107 mm
EDF Inner Diameter (mm) :	105 mm
Exit Air Diameter (EDF):	105 mm
Rotor Diameter (mm):	104.5 mm
Blades:	12
Stators:	8
Turbine shroud	Metal
EDF Rotor	Metal
Power System	MT-4250-10S
No. of Magnet Poles:	12
Turns/min/Volt (Kv):	1000 Kv
Motor Type:	Out-Runner
Motor Diameter (mm):	50 mm
Shaft diameter (mm):	8
Battery Cells:	10s - 37v
Connection:	PK 5.5mm

MORE INFO

105mm + 10S EDF Ducted Fan Motor 1000KV (CCW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 10s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to high RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Note: For a better motor heat dissipation, the manufacturer does not recommend the usage of the motor cone cover wiht the most powerful setups. If you decide to use it, please always make sure to check the motor temperature is not excessive after the first flights.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	10s (39.0v)	10s (40.0v)	10s (41.6v)
Thrust:	6.2 kg	6.4 kg	6.8 kg
Current:	112 A	117 A	125 A
Power:	4368 W	4680 W	5200 W
Recommended ESC:	130 A / HV	130 A / HV	150 A / HV
Recommended battery:	5000mAh 40C	5000mAh 40C	5000mAh 40C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Specifications

• Special high grade aluminum quality
• Motor Kv: 1000
• Motor: MT-4250-10S (6mm axle) Outrunner 12 poles
• Motor diameter: 42mm
• Motor length: 50mm
• Rotor: 105mm 12 blades aluminium
• External diameter: 107mm
• Internal diameter: 105mm
• Inlet ring diameter: 123mm (removable)
• Ejection diameter: 105 mm
• Combo max thrust: 6.8Kg
• Weight: 550g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 75600
• Speed Control Advanced Timing Setting: 15° and under
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 10s 105mm full metal EDF unit

Anti-Vibration Main Landing Gears Link diameter ?12mm wheel shaft D5mm

Included:

• 2PCS main landing gear with 2pcs Brake wheels 60mm
• 1PC nose Front Landing gear with 2pcs wheel 50mm

Specificities

Voltage: 5 - 6V
Angle: 90 °
Speed: 5.2 sec (5v) - 4.3 sec (6v)
Pin Diameter Size: 15 mm
Retracts sizes: 102 mm x 32 mm x 26 mm
Retracts mounting plate sizes: 37mm x 40 mm
For plane: up to 12 kg
Designed to work with 12-17KG sized jets

Packing:
2x Main Retract Units with Landing Gear Brake Wheel
1x Nose Gear Steerable Retract Unit with Landing Gear Wheel
1x Control Box for gear operation

Nose Gear Retract Size:

Main Retract Size:

Specificities

Voltage: 5 - 6V
Angle: 90 °
Speed: 5.2 sec (5v) - 4.3 sec (6v)
Pin Diameter Size: 15 mm
Retracts sizes: 102 mm x 32 mm x 26 mm
Retracts mounting plate sizes: 37mm x 40 mm
For plane: up to 12 kg
Designed to work with 12-17KG sized jets

Note: this Electric Retracts need use Control Module box

Packing:

2x Main Retract Units
1x Nose Gear Steerable Retract Unit

Nose Gear Retract Size:

Main Retract Size:

DATA SHEET

Length (mm):	74.12mm (without motor / Cone)
Weight (gr):	459 gr
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm):	90
EDF Outside Diameter (mm):	94.5 mm
EDF Inner Diameter (mm) :	90.5 mm
Rotor Diameter (mm):	90 mm
Blades:	12
Stators:	8
Turns/min/Volt (Kv):	1080 Kv
Motor Type:	Out-Runner
Motor Diameter (mm):	42.6 mm
Shaft diameter (mm):	6
Battery Cells:	12s - 44.4v
Working voltage (Volts):	44.4 / 12s
Connection:	PK 5.5mm

MORE INFO

90mm + 12S EDF Ducted Fan Motor 1080KV (CCW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 12s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• The V2 version offers an exceptional reduced gap of 0.25mm between each blade edge and the EDF shroud for more efficiency.
• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to 88,000 RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Note: For a better motor heat dissipation, the manufacturer does not recommend the usage of the motor cone cover wiht the most powerful setups. If you decide to use it, please always make sure to check the motor temperature is not excessive after the first flights.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	12s (44.4v)	12s (48.0v)
Thrust:	5.35 kg	6.10 kg
Current:	102 A	117 A
Power:	4528 W	5280 W
Recommended ESC:	120 A / HV	150 A / HV
Recommended battery:	3500mAh 40C	3500mAh 40C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Specifications

• Special high grade aluminum quality
• Motor Kv: 1080 6mm
• Motor: JP 4250-?-1080kv (5mm axle) Outrunner 12 poles
• Rotor: 90mm 12 blades aluminium
• External diameter: 94.5mm
• Internal diameter: 90.5mm
• Ejection diameter: 77.6mm
• Combo max thrust: 6.10kg
• Weight: 459g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 75,600 RPM
• Speed Control Advanced Timing Setting: 15°
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 12s 90mm full metal EDF unit

DATA SHEET

Length (mm):	74.12mm (without motor / Cone)
Weight (gr):	459 gr
Direction of Rotation (EDF Rotor)	Classic Counter Clock Wize (CW)
EDF Diameter Class (mm):	90
EDF Outside Diameter (mm):	94.5 mm
EDF Inner Diameter (mm) :	90.5 mm
Rotor Diameter (mm):	90 mm
Blades:	12
Stators:	8
Turns/min/Volt (Kv):	1080 Kv
Motor Type:	Out-Runner
Motor Diameter (mm):	42.6 mm
Shaft diameter (mm):	6
Battery Cells:	12s - 44.4v
Working voltage (Volts):	44.4 / 12s
Connection:	PK 5.5mm

MORE INFO

90mm + 12S EDF Ducted Fan Motor 1080KV (CW)

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 12s.

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Description

• The V2 version offers an exceptional reduced gap of 0.25mm between each blade edge and the EDF shroud for more efficiency.
• Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
• The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
• The highly rigid structure design is capable of running up to 88,000 RPM to produce extremely high efflux velocity for maximum speed and efficiency.
• Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
• Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
• You could assemble our EDF system with any other motor without losing dynamic balance effect.

The motor and fan unit comes assembled and balanced from the factory.

Note: For a better motor heat dissipation, the manufacturer does not recommend the usage of the motor cone cover wiht the most powerful setups. If you decide to use it, please always make sure to check the motor temperature is not excessive after the first flights.

Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

Description / LiPo	12s (44.4v)	12s (48.0v)
Thrust:	5.35 kg	6.10 kg
Current:	102 A	117 A
Power:	4528 W	5280 W
Recommended ESC:	120 A / HV	150 A / HV
Recommended battery:	3500mAh 40C	3500mAh 40C

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Specifications

• Special high grade aluminum quality
• Motor Kv: 1080 6mm
• Motor: JP 4250-?-1080kv (5mm axle) Outrunner 12 poles
• Rotor: 90mm 12 blades aluminium
• External diameter: 94.5mm
• Internal diameter: 90.5mm
• Ejection diameter: 77.6mm
• Combo max thrust: 6.10kg
• Weight: 459g (combo EDF + lip + motor )
• Max efficiency: 90 %
• Recommended max. rotation speed: 75,600 RPM
• Speed Control Advanced Timing Setting: 15°
• Connections: Banana / PK 5.5mm (in place)

Content

• 1x JP Hobby 12s 90mm full metal EDF unit

DATA SHEET

MORE INFO

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Note: For a better motor heat dissipation, the manufacturer does not recommend the usage of the motor cone cover wiht the most powerful setups. If you decide to use it, please always make sure to check the motor temperature is not excessive after the first flights.

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

DATA SHEET

MORE INFO

CAUTION: JP Hobby EDF are fitted with specific 12-pole motors compatible with JP Hobby brushless controllers offered as "Must have Accessories" on this page. Only the use of these controllers validates your warranty and ensures the correct functioning of the EDF. JP Hobby EDF are only guaranteed if used with these ESC.

Note: For a better motor heat dissipation, the manufacturer does not recommend the usage of the motor cone cover wiht the most powerful setups. If you decide to use it, please always make sure to check the motor temperature is not excessive after the first flights.

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.

Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Specifications

Materials: Aluminium
Struts diameter: 10mm
Wheel axle diameter: 4mm
Main gears wheels diameter: 65mm
Noze gear wheels diameter: 40mm
Weight: 590g
Wheels: ball bearings mounted
For planes up to 5kg

Include
2x Scale metal struts for main landing gear equiped with aluminium retratcs and 65mm wheels & brakes system
1x Scale metal strut for nose gear equiped with aluminium retratc and 2pcs 40mm wheel
1x Electronic brake system control module
1x Electronic sequencer module for retracts

Please choose the Aircraft landing gear door, Control box V1 or V2

Specificities

Voltage: 5 - 6V
Angle: 90 °
Speed: 5.2 sec (5v) - 4.3 sec (6v)
Pin Diameter Size: 15 mm
Retracts sizes: 79.46 mm x 39 mm x 26 mm
Retracts mounting plate sizes: 39mm x 26mm
For plane: up to 7kg
Designed to work with 7-8KG sized jets

Packing:
2x Main Retract Units with Landing Gear Brake Wheel (50mm,55mm,60mm,65mm wheel ,please choose!)
1x Nose Gear Steerable Retract Unit with Landing Gear Wheel (50mm wheel)
1x Control Box for gear operation
1x Brake controller

Please choose the Aircraft landing gear door, Control box V1 or V2

Anti-Vibration Main Landing Gears Link diameter ?12mm wheel shaft D5mm

Included:

• 2PCS main landing gear with 2pcs Brake wheels 60mm
• 1PC nose Front Landing gear with 1pc wheel 50mm