Electric PIII is AVAILABLE NOW!

The Predator is a highly sophisticated slope-racer, specially designed for F3F. It is designed by Gudmund Malones. It has been developed over a period of 18 months to get the best performance possible, and the goal was to offer a top class glider, and yet be affordable.
Materials all over are the best available as the strength and finish.

Wings and fuselage are painted in high gloss moulds, and have a long lasting hard finish. Wings have a 40 mm spar made of Herex, and the wings are made with GFK, single carbon and double carbon version.

Flight characteristics are forgiven, but it has a tremendous speed range.

It picks up speed very fast, and has a lot of energy retention.

This is important in competitions, but also gives you the very best performance while you just want to

relax with it, or perhaps just go bananas.

Fully aerobatic of course, but the essence of the Predator is the speed.

The prototypes have been flown with 1.6 kilos of ballast in severe conditions. Those are also tested in Dynamic Soaring.

But it’s also a floater in calm winds and keeps the forgiving handling in all conditions. There are absolutely no hidden secrets with it, it will most likely be your all time favourite.

Wingspan: 2960mm

Length: 1465mm

Empty weight: 1450-1600g

Wing area: 58.9dm²

Airfoil: GM08 /6.8

Tail plane: TP29

Ballast: 1600grams

Specifications:

TOBA F3B

TOBA is the name of an aboriginal people who inhabit the Province where I live called Chaco, in the north of Argentina, ...

These aborigines cut their hair from their forehead, in honor of the death of a family member, so his name TOBA, means big forehead.

I named TOBA this glider, as a tribute to all the Toba´s people in the province of Chaco - Argentina ...
Built with the best and most resistant materials available, that allows an incredible performance for flying F3B.

This advanced design completed with the latest technology in construction, allows you to be prepared for increasing demand in high competition.

Well folks, this is a great glider and I hope you enjoy it like me!

and by the end a big thanks to my family and friends of RCRCM who have supported me in this project!
The TOBA F3B is a dream come true!
Enjoy it!!

Wing span: 3085mm
Length: 1456mm
Wing aerofoil: RCRCM2010-8
Wing area: 58dm2
Tail aerofoil: RCRCM2010-10
Control surface: ailerons, flaps, elevator, rudder
Flying weight: 2000-2100g

Specifications:

Minivec...son of Vector!

Vector III has been developed over more than two decades and many variants to provide the ultimate no compromise slope aerobatic plane.

Fully moulded using CNC generated masters, the Vector is light yet strong and durable. With its 2.3m wing span and generous 20mm ballast tube, the plane is capable of precision aerobatics in anything but the lightest of conditions to a howling gale. Fully symmetrical aerofoils are used on wing and tail surfaces to provide ultimate aerobatics that are only limited by the skill of the pilot, and early development models in UK, Taiwan and Germany indicate that this claim is completely justified.

Available in a variety of colour schemes, the Vector really looks the part and flies as well as it looks.

Design By RCRCM Aero Team.

Specifications:

Wing span = 2365mm
Length = 1350mm
Wing aerofoil= SD8020
Tail aerofoil = SD8020
Weight = 1400g
Controls = Elevator, Rudder, Ailerons, Flaps/Flaperons
Construction = Glass, carbon, balsa sandwich in an epoxy matrix

Specification:

Tomcat Electric version available!!!

The new slope model with excellent performance and nice design.

Wing span: 2.6m

Fuselage length: 1.4m

Control surface: aileron, flap, rudder, elevator

CG: 96mm from leading edge to start

Mini Vector...son of Vector!

Following the enormous success of our Vector III – now a classic we decided to go a step further yet back with the Vector Mini – or to give it a buzz name MINIVEC!

Designed to have all the plus points of its dad the vector III and none of the niggles, our designer Dr. James Hammond decided to go the whole hog and give this little whizzer a whole new look.

So what’s so special?

The wings and tail planes have been curved yet retain the classic Vector look, the fuselage is softened with a larger, more curvaceous fin and the ballast now sits in the wings. Basically the clean design, affordability and plain good looks make this a plane that anybody would want in their stable.

Performance?
Well for something that breaks down into a package that can easily be taken anywhere, the flight performance is simply stunning – period. Any aerobatic maneuver that is possible for a sailplane to perform is accomplished with ease, and unlike it dad, the Minivec will tumble if outrageous control movements are your bag.

This is simply an affordable bundle of fun with a cool new look that we hope will become as much of a classic as its dad.

Design By RCRCM Aero Team.

Options include:

Wing/tail/fuselage bags

Ballast

Wiring harness

Specifications:

Span: 1.69m

Length: 1.0m

Wing Aerofoils: RC Series

Tail Aerofoil: NACA009

Typhoon X Tail: an ELECTRIC 2-metre rocket ship!

Since the original sailplane version has been very well received by the discerning flying community, we felt justified in taking the next logical to extend its performance to allow our amp addicts to have a stir. So we re-designed the fuselage to allow for some “grunt in the front”!
Probably not intended as a very first electric sailplane, the Typhoon does offer sparkling performance, but is an easy fly when thermalling. For experienced flyers, the plane is very agile, goes where it is told and generally handles like a dream.
Able to fly in almost any conditions and equipped with a full house complement of ailerons, rudder, elevator and flaps, plus the electrics, the Typhoon can perform leisurely aerobatics or be made into a hair-raising, jaw-aching rocket by opening up the power, yet it will slow down to hand-catch speed for landings.
Rudder and Elevator control servos are located in a well just behind the wing leaving the front end completely open for electrics, battery, motor installation etc.
Made from CNC generated moulds, and supplied with a full kit of small parts, Typhoon is constructed to the highest standards of fit and finish.
Typhoon is a real all-rounder, yet it will fit on the Parcel shelf of most cars.
Design By RCRCM Aero Team.

Options include:
Wing/tail/fuselage protective bags
Wing wiring harness

Specifications:
Span: 2.0m
Length: 1.2m
Empty weight: 950g
Flying weight: 1400g
Wing Aerofoils: RC blended
Tail Aerofoil: SD8020