UAV VTOL Herlea 180kg Thrust Motor BJO186SN-2 Combo w/400V/160A ESC & 1X Propeller 63 inch

Motor

Model:BJO186SN-2

KV: 14KV

Maximum power: 40KW

Number of magnetic steel poles: 28 poles

Rated voltage :400V

Rated power: 13KW

Weight: 9.3kg

400V 160A ESC

Support 400V high voltage platform, specially for super heavy load

Man-machine customized.

The third generation semiconducting material is silicon carbide

(SiC) MOS tube, as well as mature new energy vehicle drive architecture design, so that it has the advantages of high power density and high efficiency.

Equipped with 12V/1A BEC output for easy integration.

The mature and reliable sensorless FOC algorithm, combined with many years of market verification, forms a perfect development verification system, and promotes high reliability of products.

Product parameter

Model: BJO - 400 -110AX2

Power modulation type: FOC

Recommended tension: 80~90kg

Recommended battery: 96~100S LiPo

Rated output power: 30KW

Voltage range: 200V~435V

Continuous output current: 160A

Peak output current: 320A (10S)

Maximum speed: 4800RPM(20 poles)

Ambient temperature: -40~50°C

Waterproof rating: IP67

Cooling method: forced air cooling

BEC: 12V/1A

Fixed propeller function: Supported

Motor temperature detection: PT1000

Weight (excluding wire) : 1.7kg

PWM input level: 3.3V/5V

PWM input pulse width: 200~2000uS

PWM input frequency: 5O~5OOHz

Communication interface: CAN*2 (CAN2.0B, 1M bps)

Digital communication throttle: Supported

Firmware upgrade: Supported

Electrical protection strategy: 1. Locked-rotor protection, overcurrent protection; 2. Short circuit protection, overvoltage protection; 3. Undervoltage protection, input signal identification; 4. Overheat power protection, throttle loss protection

PWM

PWM Pulse Width (uS) Motor speed

Forward Direction 1100 ~ 1900 Idle speed to full throttle speed

Forward Direction 1900 ~ 2400 Full throttle speed

Stop Other Pulse 0 RPM

*Idle speed: The minimum speed, for example, 300RPM, can be set on the firmware.

*Full throttle maximum speed: The maximum speed, such as 5000RPM, can be set on the firmware.

Firmware upgrade

1. Upper computer: Sinemotion Tool

2. Upgrader: USB to CAN;

3. Battery or DC power supply;

Method

1. Connect USB to CAN converter between PC and ESC using CANH, CANL and GND;

2. Power on the power supply.

3. On the Firmware page of the ESC test tool, select the serial port, select the firmware file, and click Update.

63 inch Propeller

Size: 63 inches carbon fiber light steel wood

Weight of single paddle: 1 kg

UAV VTOL Herlea 150kg Thrust Motor TY227D Combo w/400V/80A ESC & 1X Propeller 63 inch

Motor

Model: TY227D

KV: 13 KV

Rated power: 13 KW

Maximum power: 35 KW

Rated voltage: 400 V

Weight: 7.98kg

Number of magnetic steel poles: 42 poles

Voltage range: 300-420V

Rated tension: 75kg

Maximum tension :154.5kg

Voltage :360V

400V 80A ESC

*Support 400V high voltage platform, specially for super heavy load Man-machine customized.

*The use of the third-generation semiconducting material carbonized silicon (SiC) MOS tube, as well as mature new energy vehicle drive architecture design, so that it has the advantages of high power density and high efficiency.

*Equipped with 12V/1A BEC output for easy integration.

*The mature and reliable sensorless FOC algorithm, combined with many years of market verification, forms a perfect development verification system, and promotes high reliability of products.

Product parameter

Model: FF4009

Power modulation type: FOC

Recommended tension: 80~90kg

Recommended battery: 96~100S LiPo

Rated output power: 16KW

Voltage range: 200V~435V

Continuous output current: 80A

Peak output current: 150A (10S)

Maximum speed: 4800RPM(20 poles)

Ambient temperature: -40~50°C

Waterproof rating: IP67

Cooling method: forced air cooling

BEC: 12V/1A

Fixed propeller function: Supported

Motor temperature detection: PT1000

Weight (excluding wire) : 1.5kg

PWM input level: 3.3V/5V

PWM input pulse width: 200~2000uS

PWM input frequency: 5O~5OOHz

Communication interface: CAN*2 (CAN2.0B, 1M bps)

Digital communication throttle: Supported

Firmware upgrade: Supported

Electrical protection strategy: 1. Locked-rotor protection, overcurrent protection; 2. Short circuit protection, overvoltage protection; 3. Undervoltage protection, input signal identification; 4. Overheat power protection, throttle loss protection

PWM

PWM Pulse Width (uS) Motor speed

Forward Direction 1100 ~ 1900 Idle speed to full throttle speed

Forward Direction 1900 ~ 2400 Full throttle speed

Stop Other Pulse 0 RPM

*Idle speed: The minimum speed, for example, 300RPM, can be set on the firmware.

*Full throttle maximum speed: The maximum speed, such as 5000RPM, can be set on the firmware.

Firmware upgrade

1. Upper computer: Sinemotion Tool

2. Upgrader: USB to CAN;

3. Battery or DC power supply;

Method

1. Connect USB to CAN converter between PC and ESC using CANH, CANL and GND;

2. Power on the power supply.

3. On the Firmware page of the ESC test tool, select the serial port, select the firmware file, and click Update.

63 inch Propeller

UAV VTOL Herlea 265kg Thrust Motor UN233S Combo w/400V/160A ESC & 1X Propeller 78 inch

Motor

Model: UN233S

KV: 13KV

No-load current: 1.5A/30V

Motor weight:14000 g

Maximum current:158A

Maximum tension:265kg

Electrical recommendation:ESC 400V 150A Dual mode

Rated operating voltage:400V

Interphase internal resistance:250mΩ

Leakage current:10mA

Maximum power:62454W

Maximum torque:265Nm

Propeller recommendation:JXF78 two leaf

400V 160A PRO ESC

Support 400V high voltage platform, specially for super heavy load

Man-machine customized.

The third generation semiconducting material is silicon carbide

(SiC) MOS tube, as well as mature new energy vehicle drive architecture design, so that it has the advantages of high power density and high efficiency.

Equipped with 12V/1A BEC output for easy integration.

The mature and reliable sensorless FOC algorithm, combined with many years of market verification, forms a perfect development verification system, and promotes high reliability of products.

Product parameter

Model: FF4009

Power modulation type: FOC

Recommended tension: 80~90kg

Recommended battery: 96~100S LiPo

Rated output power: 30KW

Voltage range: 200V~435V

Continuous output current: 160A

Peak output current: 320A (10S)

Maximum speed: 4800RPM(20 poles)

Ambient temperature: -40~50°C

Waterproof rating: IP67

Cooling method: forced air cooling

BEC: 12V/1A

Fixed propeller function: Supported

Motor temperature detection: PT1000

Weight (excluding wire) : 1.7kg

PWM input level: 3.3V/5V

PWM input pulse width: 200~2000uS

PWM input frequency: 5O~5OOHz

Communication interface: CAN*2 (CAN2.0B, 1M bps)

Digital communication throttle: Supported

Firmware upgrade: Supported

Electrical protection strategy: 1. Locked-rotor protection, overcurrent protection; 2. Short circuit protection, overvoltage protection; 3. Undervoltage protection, input signal identification; 4. Overheat power protection, throttle loss protection

PWM

PWM Pulse Width (uS) Motor speed

Forward Direction 1100 ~ 1900 Idle speed to full throttle speed

Forward Direction 1900 ~ 2400 Full throttle speed

Stop Other Pulse 0 RPM

*Idle speed: The minimum speed, for example, 300RPM, can be set on the firmware.

*Full throttle maximum speed: The maximum speed, such as 5000RPM, can be set on the firmware.

Firmware upgrade

1. Upper computer: Sinemotion Tool

2. Upgrader: USB to CAN;

3. Battery or DC power supply;

Method

1. Connect USB to CAN converter between PC and ESC using CANH, CANL and GND;

2. Power on the power supply.

3. On the Firmware page of the ESC test tool, select the serial port, select the firmware file, and click Update.

78 inch Propeller

UAV VTOL Herlea 200kg Thrust Motor BJO210S Combo w/400V/160A ESC & 1X Propeller 72 inch

Motor

Model: BJO210S

KV: 11KV

Rated power:18KW

Maximum power: 45KW

Number of magnetic steel poles: 42 poles

Rated voltage :400V

Weight: 11kg

400V 160A PRO ESC

Support 400V high voltage platform, specially for super heavy load

Man-machine customized.

The third generation semiconducting material is silicon carbide

(SiC) MOS tube, as well as mature new energy vehicle drive architecture design, so that it has the advantages of high power density and high efficiency.

Equipped with 12V/1A BEC output for easy integration.

The mature and reliable sensorless FOC algorithm, combined with many years of market verification, forms a perfect development verification system, and promotes high reliability of products.

Product parameter

Model: FF4009

Power modulation type: FOC

Recommended tension: 80~90kg

Recommended battery: 96~100S LiPo

Rated output power: 30KW

Voltage range: 200V~435V

Continuous output current: 160A

Peak output current: 320A (10S)

Maximum speed: 4800RPM(20 poles)

Ambient temperature: -40~50°C

Waterproof rating: IP67

Cooling method: forced air cooling

BEC: 12V/1A

Fixed propeller function: Supported

Motor temperature detection: PT1000

Weight (excluding wire) : 1.7kg

PWM input level: 3.3V/5V

PWM input pulse width: 200~2000uS

PWM input frequency: 5O~5OOHz

Communication interface: CAN*2 (CAN2.0B, 1M bps)

Digital communication throttle: Supported

Firmware upgrade: Supported

Electrical protection strategy: 1. Locked-rotor protection, overcurrent protection; 2. Short circuit protection, overvoltage protection; 3. Undervoltage protection, input signal identification; 4. Overheat power protection, throttle loss protection

PWM

PWM Pulse Width (uS) Motor speed

Forward Direction 1100 ~ 1900 Idle speed to full throttle speed

Forward Direction 1900 ~ 2400 Full throttle speed

Stop Other Pulse 0 RPM

*Idle speed: The minimum speed, for example, 300RPM, can be set on the firmware.

*Full throttle maximum speed: The maximum speed, such as 5000RPM, can be set on the firmware.

Firmware upgrade

1. Upper computer: Sinemotion Tool

2. Upgrader: USB to CAN;

3. Battery or DC power supply;

Method

1. Connect USB to CAN converter between PC and ESC using CANH, CANL and GND;

2. Power on the power supply.

3. On the Firmware page of the ESC test tool, select the serial port, select the firmware file, and click Update.

72 inch Propeller

UAV VTOL Herlea 100kg Thrust Motor BJO186D Combo w/400V/50A ESC & 1X Propeller 63 inch

Motor

Model: BJO186D

KV: 12KV

Maximum power: 20KW

Number of magnetic steel poles: 28 poles

Rated voltage :400V

Rated power: 10KW

Weight: 4.6kg

400V 50A ESC

*Support 400V high voltage platform, specially for super heavy load Man-machine customized.

*The use of the third-generation semiconducting material carbonized silicon (SiC) MOS tube, as well as mature new energy vehicle drive architecture design, so that it has the advantages of high power density and high efficiency.

*Equipped with 12V/1A BEC output for easy integration.

*The mature and reliable sensorless FOC algorithm, combined with many years of market verification, forms a perfect development verification system, and promotes high reliability of products.

Product parameter

Model: FF4009

Power modulation type: FOC

Recommended tension: 80~90kg

Recommended battery: 96~100S LiPo

Rated output power: 30KW

Voltage range: 200V~435V

Continuous output current: 160A

Peak output current: 320A (10S)

Maximum speed: 4800RPM(20 poles)

Ambient temperature: -40~50°C

Waterproof rating: IP67

Cooling method: forced air cooling

BEC: 12V/1A

Fixed propeller function: Supported

Motor temperature detection: PT1000

Weight (excluding wire) : 1.7kg

PWM input level: 3.3V/5V

PWM input pulse width: 200~2000uS

PWM input frequency: 5O~5OOHz

Communication interface: CAN*2 (CAN2.0B, 1M bps)

Digital communication throttle: Supported

Firmware upgrade: Supported

Electrical protection strategy: 1. Locked-rotor protection, overcurrent protection; 2. Short circuit protection, overvoltage protection; 3. Undervoltage protection, input signal identification; 4. Overheat power protection, throttle loss protection

PWM

PWM Pulse Width (uS) Motor speed

Forward Direction 1100 ~ 1900 Idle speed to full throttle speed

Forward Direction 1900 ~ 2400 Full throttle speed

Stop Other Pulse 0 RPM

*Idle speed: The minimum speed, for example, 300RPM, can be set on the firmware.

*Full throttle maximum speed: The maximum speed, such as 5000RPM, can be set on the firmware.

Firmware upgrade

1. Upper computer: Sinemotion Tool

2. Upgrader: USB to CAN;

3. Battery or DC power supply;

Method

1. Connect USB to CAN converter between PC and ESC using CANH, CANL and GND;

2. Power on the power supply.

3. On the Firmware page of the ESC test tool, select the serial port, select the firmware file, and click Update.

63 inch Propeller

THE COMBO INCLUDES 200100 MOTOR, 400V/150A ESC (ALL TESTED WITH REPORT) AND ONE CF PROPELLER (CW / CCW) OPTIONAL. COMBO SYSTEM APPLIED ON MANY UAV OR MANNED AIRCRAFT PROJECTS. LESS CURRENT LESS HEAT. TEAM AUSTARS PROVIDE 24/7 ONLINE SUPPORT AND SERVICE

THE COMBO INCLUDES 20060 MOTOR, 400V/150A ESC (ALL TESTED WITH REPORT) AND ONE CF PROPELLER (CW / CCW) OPTIONALCOMBO SYSTEM APPLIED ON MANY UAV OR MANNED AIRCRAFT PROJECTS. LESS CURRENT LESS HEAT. TEAM AUSTARS PROVIDE 24/7 ONLINE SUPPORT AND SERVICE