THIS IS FOR PRE ORDER ONLY PRODUCTION TIME: 2-4 WEEKS FOR CUSTOMISED LIVERY.
AEROCOMP TEAM 1ST COMPOSITE PROJECT RELEASED TO THE MARKET IN 2021 for funfly
Wingspan |
1450mm |
Length |
1850mm |
Ready to Fly Weight |
7.9kg *With 2 x 2S 2600mah RX batteries, 1 3S 2200 ECU/MFC battery and full UAT* |
Servo x 7 & Steering x 1 plus 2 x for main wing (wheel hatch) |
GDW mini servos, HV, HQ |
Retract System
LED Light
|
Servoless metal retracts with E-brake wheels
Installed
|
Main Fuel Tank |
1600-1800cc (1.6-1.8 liter) Optional without cost |
Header Fuel Tank |
120cc (0.12 liter) |
Recommended Turbine Engine |
6~8kg |
Servo:
7 middle rudders (aileron x2, flap x2, vertical tail x1, flat tail x2)
3 small rudders (front wheel steering x1, front wheel door cover x2)
Fuel tank: 1.6L
Landing gear: TM hydraulic shock-absorbing brake wheel,
Lighting system: yes
Recommended power supply battery: between 3s2200-3300
PNP Version: AG63 (Anti Slip Brake gyro controller) included for PNP version
Package options:
ARF PRO (Pre installed E retracts, thrust tube hardware package included)
PNP Version: ARF Pro plus all gears except Rx/Tx
- Constructed Composite material with light & strong airex
- With front wing edge slats - by 4 x Preinstalled HV servos
- Speed Brakes - by 2 x Pre-installed HV servos
- Fre-hinged flaps offset CG balance and scale looking
- Navigation lights - Installed
- Scale landing gear - TM Electric retract system with electric brakes with scale struts, catapult hooks, gear doors, inflatable wheels fully installed
- 16CH Built in 3S dual input redundancy voltage regulator and power distribution system - UBEC with selectable output (5-6V for servos), 7.4-8.4V for brake and retract system
- UAT, massive 1.6L tanks (2) included.
- Exhaust Pipe installed
|
|