AUSTARS MODEL (AM-ESC series, 20A, 30A, 40A, 50A)- SIMPLER IS BETTER!

To give modellers more convenience, all connectors were pre-soldered!

AMESC-30A is a new generation of brushless and sensorless speed controller with the control of micro processor. Its performance in terms of compatibility, reliability and stability can compete with other world famous brands!

Specification:

1.       Output: Continuous Current 30A, burst current 40A (no less than 10 seconds)

2.       Input: 5.6v-11.1v (2-3cells Lipo or 5-12 Nixx)

3.       BEC output: Linear manostatic approach

4.       Dimension: 23x43x6mm (W*L*H)

5.       Weight: 23g

Features:

1.       Support high RPM motors

2.       Circle menu setting is simple

3.       Power arming protection: (prevents the motor from accidentally running when switched ON)

4.       Lost throttle signal protection

The ESC will automatically reduce output power to the motor when it detects a lost of throttle signal for 1 second. A subsequent loss of throttle signal beyond 3 seconds will cause the ESC automatically to cut power to the motor.

Safety thermal over-load protection:

1.       Automatically reduce output power to half when the temperature reaches 110 degree, restore output power when the temperature is below 110 degree.

2.       Can continuously provide power to the motor

Acceleration:

1.       Provides quick acceleration start-up with a linear throttle response.

2.       Governor Mode: Helicopter application

3.       With latest humanized software design, for all types of brushless motor.

4.       New advanced programming software

Functions:

1.       Brake: on/off, factory default setting: off

2.       Battery type: Lipo/NiMh/Nicad, factory default setting: 3 Lipo

3.       Under voltage protection (Low voltage cutoff type)

4.       Cut off: stop motor immediately

5.       Ignore: motor won’t stop until the battery is flat

6.       Factory default setting: reduce power:

7.       Soft start (Acceleration): Factory default setting: soft start: enable

Timing:

1.       Automatic: (7-30 degree)

2.       Soft: (7-22 degree)

3.       Hard: (22-30 degree)

4.       Factory default setting :automatic

5.       Frequency: 8KHz/16KHz, factory default setting: 8KHz

Heli Governor mode: factory default setting: rpm control off

Download instruction manual:

http://www.austars-model.com/document/0806180836598391instructionmanual.pdf